Race Car Factory

Race Car Factory Specializing in dragracing performance, chassis, suspension tuning and fabrication. EFI, Dyno tuning

Just wanted to hop on here and make a post quick as I have had many people say they tag this page etc.. 1. Just wanted t...
04/28/2026

Just wanted to hop on here and make a post quick as I have had many people say they tag this page etc..

1. Just wanted to say Thank you, we appreciate anyone supporting us.

2. I have not been on Facebook in over 2 years (Justin) and have no intentions on coming back to this platform.

3. Best ways to contact are shop phone you can call or text, email or dm the IG page.

4. Anything that ever gets posted on this page, is just an auto post from IG that I constantly have to disable.

Anyways, hope you all have a great day! Enjoy the weather. Get ahold of us any of the above ways if you have questions about getting anything done.

Thank you!!! - Justin

Another one out the door.Procharged z06 came to us with some drive train noises. We found it has a bad diff.Dropped the ...
04/13/2026

Another one out the door.

Procharged z06 came to us with some drive train noises. We found it has a bad diff.

Dropped the drive train, swapped diff, r/i and bleed fluids now she's ready to hit the road again 🫡



Text or call to schedule your job in soon 👊🏼
480 689 6030

Stator change in this converter.We are a proud dealer, happy to help anyone out!!
02/06/2026

Stator change in this converter.

We are a proud dealer, happy to help anyone out!!

Push bar kit we made for customer that has a standard pickup truck (2.5") receiver hitch on his golf cart.
01/19/2026

Push bar kit we made for customer that has a standard pickup truck (2.5") receiver hitch on his golf cart.

Another HCI C6z wrapped up on dyno.Stock bottom end.Frankenstein heads"Stage 4.2 NA camshaft"All the supporting goodiesW...
12/19/2025

Another HCI C6z wrapped up on dyno.
Stock bottom end.

Frankenstein heads

"Stage 4.2 NA camshaft"

All the supporting goodies

We installed a mantic clutch
Fuel system, e85, trinity intake, katech tb, improved racing windage tray, RCF crankcase ventilation system, etc etc..

We initially had this car on the hubs 2 weeks ago, juat before the 3rd pull i noticed upon fire up car only had 3 psi oil pressure!

No knocking. We pulled intake on dyno and swapped sensors. Verified it did have extreme low pressure.

Put car on rack. Dropped pan. Inspected bottom end and all looked good.

Pulled front accessories and found the oil pump had ALL cover bolts loose hence all the pressure was being dumped at the source.

Pulled it off. Tore it open, found no. Damage, loctite and torque to spec. Back in car 60psi at idle 🫡

Ready for nitrous 😈





Little SCSN prep.New charge pipe with dual seal clamps.Ran a PB last time out and charge pipe came out the silicone coup...
11/18/2025

Little SCSN prep.

New charge pipe with dual seal clamps.

Ran a PB last time out and charge pipe came out the silicone coupler near the end of the run.

That won't be an issue anymore.

We are on the hunt for the 4 second pass this weekend. 🫡




10/31/2025

Sometimes small changes make a BIG difference. Picked up almost 400hp on this bad boy!

Track rental ready 🇺🇲🇺🇲🇺🇲🇺🇲

8500rpm of freedom and boost

67 is on the ground! Ride height set. These custom wheels turned and fit exactly how we envisioned it!!Finish plumbing b...
10/23/2025

67 is on the ground! Ride height set. These custom wheels turned and fit exactly how we envisioned it!!

Finish plumbing brakes, then start on turbo kit, plumbing fuel and wire/ fire.





Happy Friday. Hope everyone enjoys their weekend!Had some fun on the hubs today tuning this 440" 98mm G trim Saleen on M...
10/11/2025

Happy Friday. Hope everyone enjoys their weekend!

Had some fun on the hubs today tuning this 440" 98mm G trim Saleen on Methanol.

No numbers to be posted, per owner. But it will be out soon having fun with the crew shoving boost into the cylinders.




Wilwoods on all corners for the 67 Camaro. This is a pro touring build.4 link, sway bars, power steering, fuel injection...
09/15/2025

Wilwoods on all corners for the 67 Camaro.

This is a pro touring build.

4 link, sway bars, power steering, fuel injection, 6 speed manual, twin turbo, flex fuel etc..

Going to be pretty badass 😎

Final part of the little list of updates for Pulled trans to add dump valve/ modify pump, clean it up, added shift rang...
09/06/2025

Final part of the little list of updates for

Pulled trans to add dump valve/ modify pump, clean it up, added shift range sensor to be utilized for some cool features.

Pulled out center section for some better gearing for the blower combo finally, upgraded to pro gear/ big pinion/ all new bearings etc..

Added some roll bar padding in the funny car area.

Updated to an air launcher and got away from the old pilot chute.

Fresh rubbers

Cleaned up injectors/ oil change and she's ready for some testing.

Address

2235 W 1st Street Ste 106
Tempe, AZ
85281

Opening Hours

Monday 10am - 7pm
Tuesday 10am - 7pm
Wednesday 10am - 7pm
Thursday 10am - 7pm
Friday 10am - 7pm

Website

Alerts

Be the first to know and let us send you an email when Race Car Factory posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Race Car Factory:

Shortcuts

Featured

Share