Procision Industries, Inc

Procision Industries, Inc Specializing in Resto-mod builds, engine swap and conversions, performance suspension, engine control systems and chassis wiring.

After a month of hibernation the Camaro is back on the main stage for another round of tech. Up next we dive into audio....
05/25/2026

After a month of hibernation the Camaro is back on the main stage for another round of tech. Up next we dive into audio. And yes we added a four post lift to help get more accomplished and add some useable space to the shop along with plans for some other greatness directly related to having this lift in place.

Another 69 Camaro in for a quickie. 530hp LS3, ditching the gloss black engine compartment in favor of satin for a more...
05/14/2026

Another 69 Camaro in for a quickie. 530hp LS3, ditching the gloss black engine compartment in favor of satin for a more factory feel. This will be getting the ZL1 look. In house 60e loaded with & and a fresh 12 bolt. all around, the usual suspects.

Our first time diving into with and his wicked 69 Camaro that we are working through. This is a much different approac...
05/08/2026

Our first time diving into with and his wicked 69 Camaro that we are working through. This is a much different approach than we typically take, but a lot of this car is a bit outside of the norm for us. Love the opportunities that our clients present, and trust that we will give it our absolute best effort to achieve or even better exceed their goals. Excited to see this car come together, and even more excited over the enthusiasm behind this project. It’s one that’s been long overdue 💪

Whipped up a set of filler panels for the fender apron- former battery tray area to cover up a botched previous attempte...
05/07/2026

Whipped up a set of filler panels for the fender apron- former battery tray area to cover up a botched previous attempted repair and add a little finishing touch to the Riv engine compartment. A little final finish work and they will get some gloss black paint and bolt in. We have just a little more shakedown and some miles to put on it, but it’s about buttoned up at this point and hopefully exiting the building in the next few days.

Alright friends, who’s got a source or recommendation for us on the mating connectors to this GM Delphi Packard bulkhead...
05/05/2026

Alright friends, who’s got a source or recommendation for us on the mating connectors to this GM Delphi Packard bulkhead for both engine harness and front body harness? Late 60’s through the 70’s very popular across the GM platforms. Looking for a few of each. NOS, reproduction, A grade used all acceptable. Looking for at least two of each, possibly a handful if I can find a source. .autowire refuses to sell them even though they make them 🧐.

I am specifically looking for the engine compartment side connectors that are on the harness that plug into this bulkhead which is attached to the backside of the fuse box. I have plenty of terminals.

Last week won, but this week is revenge! Up and at it this morning installing some flex bellows in wicked 93 Cobra alon...
04/27/2026

Last week won, but this week is revenge! Up and at it this morning installing some flex bellows in wicked 93 Cobra along with ditching solid drivetrain mounts and some other mods to help tame the harshness. This car is so nice, and everyone knows that last

Let’s gooooo! We all set up , , .buck
04/25/2026

Let’s gooooo! We all set up
, , .buck

04/22/2026

Fred’s Riv is alive and moving under its own power!







@508.gsxrsquid great job buddy 💪

Bad ass little 550hp motor @508.gsxrsquid got painted and pre assembled and ready to drop into a wicked 69 Camaro that’...
04/17/2026

Bad ass little 550hp motor @508.gsxrsquid got painted and pre assembled and ready to drop into a wicked 69 Camaro that’s on deck. Lots of goodies on this upcoming project. Dakota Digital, Vintage Air, Wilwood, Moser, 60e full of Sonnax goodies, Circle D converter, Magnaflow exhaust and a whole bunch more. It’s a drive through LS swap center, just chose your sides. Condiments are over by the fountain sodas 🥤 🍟

Looks halfway decent mid bath. Bass Pro Mass Cruisers season opener tonight twinturbo
04/16/2026

Looks halfway decent mid bath. Bass Pro Mass Cruisers season opener tonight



twinturbo

Address

Taunton, MA
02081

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm
Sunday 9am - 5pm

Telephone

+15087346081

Website

Alerts

Be the first to know and let us send you an email when Procision Industries, Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Procision Industries, Inc:

Shortcuts

Share

Category