Grover Boys Racing 777

09/27/2025

After some controversy over pricing and being told WE are charging to much on this special, were going to really amp it up. $100 Labor cost plus parts for front and rear brakes! Thats cheaper than any other shop around. Contact us today to get your car in before this special runs out!

It's that time of year again! Get on it before the snow starts to fall and holidays hit, because we all know its coming quick! We have been saving customers 1000s on brake jobs! Yes thats correct THOUSANDS! Is that insane or what? We atleast think it is! Lately Dealers and auto shops have been pushing unneeded work on some of our more recently gained customers and we dont find that fair. We have families who need feeding and roofs to pay for among other high costs of living. We're running our yearly brake special. $300 labor cost for front and back brake pads and rotors + the cost of parts! Thats correct, you read it right the first time! $300+ parts! Message us today on my fb page directly Adam Grover or through the GBR page to schedule your car for service!

09/18/2025

It's that time of year again! Get on it before the snow starts to fall and holidays hit, because we all know its coming quick! We have been saving customers 1000s on brake jobs! Yes thats correct THOUSANDS! Is that insane or what? We atleast think it is! Lately Dealers and auto shops have been pushing unneeded work on some of our more recently gained customers and we dont find that fair. We have families who need feeding and roofs to pay for among other high costs of living. We're running our yearly brake special. $300 labor cost for front and back brake pads and rotors + the cost of parts! Thats correct, you read it right the first time! $300+ parts! Message us today on my fb page directly Adam Grover or through the GBR page to schedule your car for service!

09/18/2025

Forgive me for not posting on here much anymore, but we've been making alot of changes lately. We have 2 youtube channels, and the type of work we do is also switching directions. We offer full porting services and unfortunately have had to raise our prices due to everything else going up.

Next for the people who want general maintenance, those prices will depend on what it is youre getting done on said car as per usual

For Performance tuning I am keeping this at the same rate it has always been but adding fuel cost and travel time. Time and fuel is not free.

At the moment we will not be taking on big jobs pulling engines and transmissions etc.

If anyone is interested in our services feel free to message me direct Adam Grover on FB or through the page messenger and I will get back to regarding any service needed done by myself or by my father.

Thankyou!

04/13/2023

We are offering returnless fuel system setups for your street/ strip car, these kits come with everything needed for your vehicle. Take the guess work out of what you need for a fuel system with one of our fuel system kits starting at UNDER $500 shipped to your door! These kits include a 10 gallon fuel cell, 33ft of 6an black nylon braided hose & hose end fittings, a carter electric fuel pump, holley 3 port adjustable regulator, 1 1/2 AED fuel pressure gauge, russel fuel filter, fittings required for fuel cell, pump, and regulator, and as an added bonus, well throw in an adjustable AN wrench! These kits support upto 500 naturally aspirated horsepower and are perfect for entry level drag racers! These kits can be modified to your liking with return style setups, line size, tank capacity, and the choice of your fuel pump, regulator and filter. Shoot us a message today to get yours!

(Free shipping is for the lower 48 US states)
(Charges will apply for customized kits)
(Parts may differ from parts pictured, all fuel cell lines and fittings will be black unless stated otherwise before placing your order)

04/10/2023

As we may not post as much on this page as we used to, a congratulations is in order to our very own Christopher Grover from the Grover Boys Racing family. Hes now a dealer for Ams Oil products and can make you a preferred customer today! Get the oils you need at a discounted cost! Why pay extra for the same product when you can save money by becoming a member for just $20 for the entire year! In turn saving you 100s of dollars between the racecar, your tow rig, and even your family vehicle! Message him now and become a member so you can place your orders TODAY!

12/03/2022

Im happy and excited to announce, we will be putting our green gangster back together for 2023, and with a setup kind of out of our element here. As much as it sickens me to say these 3 letters, e f i. Well be using ms3 pro (originally for a ls setup) and this new to me vortech ysi trim supercharger. We will be reinstalling our stock bottom end e7 headed 302 and our gforce t5, and we are on the hunt for the stock bottom end 302 stickshift record that was set by chris watson @ 5.89@125mph. Im also excited to announce we will be teaming up with mateo green @ r&m automotive for the tuning of this particular setup to get this thing dialed in and hopefully pull this record off. 2023 the hunt for 5.88!

09/10/2022

Hey all, its been awhile since i posted on here or youtube, but this was somthing worth sharing, our life long friends Bud and Kenny brought us a set of 243s to have ported, the car was stuck pretty consistently into the [email protected] mph range with the factory 317s and they wanted that 10 second slip. Today is their first time back to the track after swapping to our ported 243 heads. Bud street drives this thing all over on pump gas and has fun doing it. Without a care in the world, him and his family went to the track to make some passes. With 0 tuning adjustments and some small issues fighting him, he still managed to get that 10.9 pass @ 123.62 mph. We believe theres another 3 tenths and 2-3 mph left in that time slip with the issues he was facing. Wed like to congratulate Bud and thank him for choosing us and putting his trust in us to help him get the job done.

06/23/2022

Our latest video on GVWR and what it means, check it out!

i explain what gvwr stands for and how to figure out what your factory foxbody mustang might weigh

06/18/2022

Sorry we havent been posting much on here lately. I either post on my personal page or on youtube, for those of you that follow this page know we expertise in the ford performance realm and specialize in foxbody mustang performance, check out our latest video on how to carb swap an efi foxbody mustang without making it so the efi system can not be re-installed. This will keep the value of your 86-93 mustangs higher than the other carbed swap mustangs out there that have harnesses cut, spliced and chopped.

https://youtu.be/xewgpyWbcms

That being said we have picked up a s10 blazer otherwise known as the "NTG Blazer" that had a small block gen 1 chevy engine in it and is now in the process of a ls swap and being finished up, there will be a video to update the status on the NTG Blazer shortly just bare with me. Click that like and subscribe button if you'd like to be updated on when we post more videos of our personal projects and some of our customers vehicles. (This will exclude any of the grudge raced cars that we work on). Thankyou all for your bussiness, support, and patience.

If you or someone you know needs any performance oriented work or tuning feel free to shoot us a message and we will get back to you. Thankyou!

tech video on how to swap a foxbody over from efi to a carburetor cheap easy and effectively.

12/20/2019

Always a honda lol. This car was taken to another shop because the tensioner bolt snapped off in the block. That shop drilled the block out and returned the car to the customer. We got a new belt rerouted it and got this guy back on the rd in time for the holidays.

11/17/2019

Here we have trunion upgrade on a set of lsx rockers for one of our customers. Why take a chance on hurting your valve train or worse when you could save it over a $50 part? This is one of the cheaper trunion kits which is still way better than the factory rocker design using needle bearings for less friction loss along with press fit races and c clips to hold it all together. If youre interested in this modification feel free to contact us for pricing through text, instant messenger, or even give us a call at our phone number listed on the page!

10/19/2019

Another set of ls valve covers done in crinkle black