Hackjobs Performance

08/24/2026

This beautiful GMC came in just for the final touches. The owners of this truck did an amazing job on this build. We helped finish the American Autowire kit and PSI Conversion standalone harness install. We also installed a set of Dakota Digital VHX gauges with the bim module. Omar at Omar made us a custom cold air intake. We put some finishing touches and got it fired up. Let us know if we can help you finish your dream!

07/13/2026

On this really good looking Nova we put the final touches on the wiring, cleaned it up a bit, and finished some plumbing. Just about ready to hit the streets. Let us know if you have a stalled project that needs that final push.

07/05/2026

This clean LS swapped OBS came in with some issues. We tore into it. Installed a Brian Tooley Racing stage 2 truck cam kit, lifters and head gaskets. We also installed Speed Engineering long tube headers and an aluminum radiator with efans. We also cleaned up the bay a bit without getting carried away.

05/31/2026

We got this Cat eye 2500 short bed in for some engine noise. We found a spun cam bearing. The engine got sent to our machinist. We ordered up a stage 2 truck cam kit, lifters, all new gaskets, and supporting parts. After we got everything assembled on the fresh engine rebuild, and the engine reinstalled, it was ready for the customer to take to his preferred tuner.

05/18/2026

This super clean Escalade came in with a collapsed lifted and bent push rod. We ripped into it deleting the displacement on demand. In addition we installed a stage 2 Gen V truck cam from . Out the door it went. Will be back soon for long tube headers

01/26/2026

Putting the final touches on the Chevrolet Cheyenne. This truck came in burnt to a crisp. We started by completely gutting the truck. After, it went straight to to get a new roof installed and inside cab and firewall paint. After we got it back, we started by installing an .autowire kit for the body electronics. We also installed a LS3 6l80 combo from our trusted buddies at . A harness was used to control that combo. We installed RTX gauges and for monitoring and comfort. The suspension and brakes were also addressed. handled all the aluminum fabrication. We also installed new doors, hood, and cowl from Customer took it to his choice of auto body and interior

01/01/2026

01/01/2026

2024 recap