Motor Machine Shop

10/29/2020

We decided to dress up for Halloween as mike!

03/05/2020

A 408 ls going together with some cnc ported heads and 11.3 to 1 on compression. This na motor should be pretty fun to drive!

11/07/2019

A little ls motor we are doing that required some clearancing for the stroke on the crankshaft and the hbeam rods.

09/30/2019

09/23/2019

There was a fire on commercial street 2 house down but it didnt get to us. We are all good here at the shop.

06/25/2019

Got a customer who bought some new rods. I can say i very impressed with these rods. Look very well made.

06/04/2019

Had a customer bring us a engine that was a fresh build that he got with a car he bought. We took it apart to find that the balance job was way off and i took the heads apart and found this nut that someone lost down a intake runner. Not your typical nut you find in a engine but still would do damage.

05/23/2019

Gots some pistons in today for a big block ford. This big boy should make some power!

04/09/2019

A little before and after cleaning! Getting the clean on a new build is one if the most important things you can do.

03/21/2019

Another performance valve job done! This one is a 5 angle valve job. This typically gains 12 to 15 cfm on a flow bench by doing this multi angle valve job.