Weaver Fabrication

Weaver Fabrication hi-steering kits and a variety of supporting parts for the off road fabricator.
(3)

Operating as usual

I thought i had seen it all..😃
11/18/2020

I thought i had seen it all..😃

09/23/2020

Orders moving out daily, thanks guys!
Glad to see more and more EMF billet ball joints making their way out to my customers also. Thanks Mike!

08/07/2020

Well, we are back, now in Tennessee! Still getting the details sorted but we have plenty of inventory ready to go..!
New website is coming in the next few weeks also!

550+ HP coyote ready for its new home..
06/16/2020

550+ HP coyote ready for its new home..

Joes ls stroker is done and headed to a ultra 4 track near you soon. Time to get the coyote heads assembled and ready to...
06/12/2020

Joes ls stroker is done and headed to a ultra 4 track near you soon. Time to get the coyote heads assembled and ready to install. Ported heads and a 3 angle valve job should help it make a bit more steam..

06/06/2020

Well, it is official. Weaver Fabrication is relocating to Tennessee! We will be closing doors effective June 15th. Please do not send any cores after monday without calling first. We will not be responsible for them. All orders placed before then will be filled. We will announce our reopening as soon as we get settled. Thank you for your patience during this time. 👍

Got 99-04 hi offset? Yes we do, thanks Andrew in WI!
04/17/2020

Got 99-04 hi offset? Yes we do, thanks Andrew in WI!

When you order ball joints from us, we install them at no charge, just part of our normal customer service.
04/17/2020

When you order ball joints from us, we install them at no charge, just part of our normal customer service.

Ls short done, coyote 5.0l heads getting some love..
04/17/2020

Ls short done, coyote 5.0l heads getting some love..

Doin racecar stuff today..
04/04/2020

Doin racecar stuff today..

04/02/2020

Well, things are picking up despite our temporary virus craziness.. stay safe my friends, and finish those projects..

Weaver Fabrication
03/28/2020

Weaver Fabrication

03/28/2020

Hey guys, the website is down but we are here. New site under construction with new products. No worries, just call or pm us with anything you need. Still shipping daily!

02/03/2020

Here for an awesome week with great friends.. We even have a few free T shirts to give away 🍺

There will be WeaverFab in Peurto Rico.. a nice 2016 kit for Josue! Thanks!
01/17/2020

There will be WeaverFab in Peurto Rico.. a nice 2016 kit for Josue! Thanks!

Another 4" raised 05up arm headed out..
11/19/2019

Another 4" raised 05up arm headed out..

Weaver Fabrication
09/24/2019

Weaver Fabrication

First set of new style 05'-up WeaverFab drive flanges heading out tomorrow! Thanks Shad in UT..
09/24/2019

First set of new style 05'-up WeaverFab drive flanges heading out tomorrow! Thanks Shad in UT..

EMF billet tie rods are now in stock! Rebuildable, super stregnth, and available in standard and hi angle (45*) versions...
09/06/2019

EMF billet tie rods are now in stock! Rebuildable, super stregnth, and available in standard and hi angle (45*) versions in l/h and r/h threads. 7/8-14 thread, same as rod ends. We also have weld bungs in stock to build you own linkage.
* Check out the trick straight pin versions! No taper to deal with, built in misalignment washer, 45 degrees of operating angle! In stock baby!

EMF vs Dynatrac...Uppers, the EMF once again has far better clearance, especially important when using rcv or big 1550 u...
09/06/2019

EMF vs Dynatrac...
Uppers, the EMF once again has far better clearance, especially important when using rcv or big 1550 u joints for clearance. Again the adjuster is top loaded, meaning no load on the adjuster threads during operation. And again, the adjuster diameter is huge, giving far better stregnth. Best of all, the grease fitting is on the top of the stud! P/S: all components in the EMF are steel, no plastic, brass, bronze, or anything else. Best of all, they can be rebuilt in the knuckle, no need to press out for service, if you ever wear a set out.. $649 for dynatracs vs. $550 for EMF with tool kit!!

EMF vs. Dynatrac ball joints...EMF lowers are virtually the same depth as a spicer, look how far the Dynatrac hangs down...
09/06/2019

EMF vs. Dynatrac ball joints...
EMF lowers are virtually the same depth as a spicer, look how far the Dynatrac hangs down ready to get destroyed by any rock that it hangs up on. The adjuster is also bottom loaded on the dynatrac. The emf is all up top, protected from damage. The EMF adjuster is not loaded by the weight of the vehicle like the dynatrac and it is infinately adjustable, the dynatrac is a coarser adjuster, only held buy a e-clip. The EMF adjuster is 3 times the diameter of the Dynatrac, giving greater stregnth. The grease fittings are both on the bottom, but, the EMF is countersunk, if you use a needle type zerk, it cant get hit at all..

08/31/2019

Labor day sale!
05'-up Unit bearing cups, normally $540, $450
05'-up drive flange kits normally $245, $200
99-2019' Emf ball joint sets, normally $550, $499
99-04 ball joint savers, normally $275/pr, $225
All orders through Monday! Pm or email us for holiday savings.

Ok, we now have EMF ball joints in stock! First set is already sold, a few more have been spoken for. These aren't on th...
08/13/2019

Ok, we now have EMF ball joints in stock! First set is already sold, a few more have been spoken for. These aren't on the website yet so call or message me to get in on these bad boys..

99-04 unit bearings bored for 35 spline shafts. Headed to Colorado.. We will now be offering this service and will soon ...
08/13/2019

99-04 unit bearings bored for 35 spline shafts. Headed to Colorado.. We will now be offering this service and will soon have 35 spline Timken units with dual patterns in stock.

Hi offset 99-04 with our gm split bushing installed. Heading to new york..
08/13/2019

Hi offset 99-04 with our gm split bushing installed. Heading to new york..

08/07/2019

Good news, the first batch of EMF superduty ball joints have shipped, we grabbed what we could. Don't miss out on these, $550 a set with tools! (Full set) reserve yours today..

WeaverFab 2017-2019 Ford F250-350 Gen2 hi steering kit. Get the twist out. Compatible with our gen1 knuckle, the new arm...
06/18/2019

WeaverFab 2017-2019 Ford F250-350 Gen2 hi steering kit. Get the twist out. Compatible with our gen1 knuckle, the new arm features angled machining to the tip of the arm, vacuum hub lock port and tie rod hole. Give us a call today to get yours..

We are happy to announce we are now an EMF tie rods and ball joints dealer. Happy to partner with one of the best in the...
05/21/2019

We are happy to announce we are now an EMF tie rods and ball joints dealer. Happy to partner with one of the best in the industry. Ford superduty ball joints are expected in stock shortly. We will be carrying heim joints (rod ends), tie rods and ball joints. Look for new diy steering linkage kits to go hand in hand with your WeaverFab gear! Anyone wanting a set of 99-2019 EMF rebuildable superduty ball joints, just message me or let us know to get in on the first batch!

Whaaaaat? Hi offset arms for both sides? Yep, we got driver side hi offset arms for the 99-04 gang now..
03/29/2019

Whaaaaat? Hi offset arms for both sides? Yep, we got driver side hi offset arms for the 99-04 gang now..

Got hi offset 99-04?
10/26/2018

Got hi offset 99-04?

10/02/2018

Ok guys, shirts are in! We have l, xl and 2xl in black and grey. $20 ea for l and xl, 2xl $22..
For now just message me or post up here and we can get it handled, thanks

New WeaverFab shirts on the way, l, xl and 2xl grey and black. These prolly wont last long..
09/20/2018

New WeaverFab shirts on the way, l, xl and 2xl grey and black. These prolly wont last long..

Standard 05-up arm vs. 4" 05-up arm. Beef..
08/16/2018

Standard 05-up arm vs. 4" 05-up arm. Beef..

Been slacking with the updates lately, been busy with lots of stuff. Thought you guys might like to see the new 05-16' 4...
08/16/2018

Been slacking with the updates lately, been busy with lots of stuff. Thought you guys might like to see the new 05-16' 4" raised arm. For big lifts and leaf spring guys. Call to inquire, these aren't on the website yet.

Well, 2018 is off and running, been busy shipping kits out. Another pair of siblings headed to Tennessee, 2015 and 2017 ...
01/25/2018

Well, 2018 is off and running, been busy shipping kits out. Another pair of siblings headed to Tennessee, 2015 and 2017 superduty knuckles. The word is out, if you are lifting a new superduty, WeaverFab is your source for hi steering..

Address

2994 Crafton Road
Spring Hill, TN
37174

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00

Telephone

(530) 351-4485

Alerts

Be the first to know and let us send you an email when Weaver Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Weaver Fabrication:

Nearby autos & automotive services


Other Automotive Parts & Accessories in Spring Hill

Show All