357 Hot Rods

357 Hot Rods we love hot rods or anything with a motor We have completely re-organizing the shop and have lots of brand new equipment.

We offer sand blasting, body work, welding & fabrication services, and can do everything from general maintenance to full out restorations. We have several cool projects going on right now so stay tuned for new photos and updates. Give us a call or stop in and see us sometime to get started on your own hot rod project.

02/05/2021
We have been trying to get brakes up on , The Wild Deuce. It has been a very aggravating experience. We have replaced th...
02/05/2021

We have been trying to get brakes up on , The Wild Deuce. It has been a very aggravating experience. We have replaced the master cylinder. Bleed a gallon of fluid through it. Still no pedal. Ordered new front brake lines today , and we will try again tomorrow. This car is for my daughter. Pop has supplied the grand kids all with hot rods.

The black sheep of the family is ready to crank. If all goes well on the start up it will be off to have the top put on ...
02/05/2021

The black sheep of the family is ready to crank. If all goes well on the start up it will be off to have the top put on it. I painted this car . When I cleared it , the temp out side was 20 degrees . The clear looked so good when it went on. And the next day it was running off the car onto the floor. Possum killer fixed that. I put the engine together but did not have time to get the valves finished in it. Paul Kosma bailed me out there. Pop built the car, it has a new quick change, t-5 5speed , and a big flattie . It has Pontiac 8 lug wheels, and a dash cluster from a 50 Nash . I can not wait
to have all three cars together at a show . That will be a great day. I forgot to add the black sheep belongs to my adopted brother , Thomas Henley . He is the black sheep

Pop and I purchased this pickup along with a 36 two door sedan . The 36 went back to the original owner ( that alone is ...
02/05/2021

Pop and I purchased this pickup along with a 36 two door sedan . The 36 went back to the original owner ( that alone is a very cool story) , and we were left with this little green pup. We have been working on it for about 6 months. In the process we found one big problem. The fuel tank was rotten so much so it came apart while we were taking it out. I found another one same color and same year. I had to do a little hammer work on the wire loom under the tank( big dent) . Now we have it in the rotisserie. We cleaned and now we are ready to seal. We moved the truck from the bat cave to the shop out back . This was my second ride in the truck going by the turnip patch is a big thrill. Can’t wait to drive it down the street.

It has been some time since I posted on this side . Since closing my shop, I have not had much interest in posting stuff...
02/04/2021

It has been some time since I posted on this side . Since closing my shop, I have not had much interest in posting stuff here. But after spending many days with pop, helping him finish some cars. The love of hot rodding is returning. The virus has forced myself to focus more on these projects and family. So with all that being said. Here are some pics from this morning. Project shuffle .

12/12/2019
Well Adam got to drive his late fathers car home yesterday. Days like this make all the bad ones go away. Thank you Adam...
04/10/2016

Well Adam got to drive his late fathers car home yesterday. Days like this make all the bad ones go away. Thank you Adam for letting us work on your car . My hope is that you drive the wheels off of it, and your kids come to love it like you have .

The hood and the grill for the new 357 car is done. I never knew life could be so good just but using a paint booth . I ...
02/27/2016

The hood and the grill for the new 357 car is done. I never knew life could be so good just but using a paint booth . I thought the back yard was the only place to paint

Got this big iron back the other day from BB&T 427 Chevy to build waiting on cam and overhaul kit to come in. Big big mo...
02/27/2016

Got this big iron back the other day from BB&T 427 Chevy to build waiting on cam and overhaul kit to come in. Big big motor

The kid painted the old goats frame nice shiny black
02/08/2016

The kid painted the old goats frame nice shiny black

Cage in the ChevyII painted now to get it jammed and the floors painted
01/15/2016

Cage in the ChevyII painted now to get it jammed and the floors painted

Head lights and tail lights for the new 357 car head lights are 36 Lasalle head lights the rears are 36 dodge with 49 Po...
01/15/2016

Head lights and tail lights for the new 357 car head lights are 36 Lasalle head lights the rears are 36 dodge with 49 Pontiac lens big and cool

Address

9075 Southview Street
Southaven, MS
38671

Alerts

Be the first to know and let us send you an email when 357 Hot Rods posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 357 Hot Rods:

Share