RaceLab Fabrication

RaceLab Fabrication Racelab Fabrication specializes in rollcage and chassis design. We also offer intake and exhaust ser
(7)

06/16/2023

Anyone else notice that auto metal direct packs a floor pan like it’s going to war, but they will pack skins like it’s gong to be delivered by cherubs with white gloves on?

So that happened… working theory, there was sediment in the heater core that got churned up from the transport, clogged ...
04/08/2023

So that happened… working theory, there was sediment in the heater core that got churned up from the transport, clogged the radiator, and then backed up the flow so bad the impeller broke off? Emp Stewart pump with about 250 miles…

For the last time! Brake lines are not good substitutes for bump stops!
03/27/2023

For the last time! Brake lines are not good substitutes for bump stops!

Feb 3 ate a washer, to March 13, raised compression, forged pistons, roller cam and full refresh. Remember kids, your al...
03/25/2023

Feb 3 ate a washer, to March 13, raised compression, forged pistons, roller cam and full refresh. Remember kids, your always just just a few Pennie’s away from spending thousands. Budget accordingly!!!

Goodbye old friend. You were here WAY to long. But how far you’ve come!!!
03/24/2023

Goodbye old friend. You were here WAY to long. But how far you’ve come!!!

Fiberglass and painted over a hole in the bell housing. 550lbft and 4000lbs… send it?
03/23/2023

Fiberglass and painted over a hole in the bell housing.
550lbft and 4000lbs… send it?

Usually when a manufacturer gives an estimated install time I am +\- 25% faster. This was not one one of those times. EP...
11/15/2022

Usually when a manufacturer gives an estimated install time I am +\- 25% faster. This was not one one of those times. EPAS electric power steering conversion.

“It’s only been parked a couple years.”
11/15/2022

“It’s only been parked a couple years.”

When you can’t stand hood pins but have to have them… you end up spending a lot of hours recess them so they sit flush…
10/10/2022

When you can’t stand hood pins but have to have them… you end up spending a lot of hours recess them so they sit flush…

Some days can go from triumph to tragedy very quickly.  Yesterday was one of those days for me. I’ve been working on thi...
08/24/2022

Some days can go from triumph to tragedy very quickly. Yesterday was one of those days for me.
I’ve been working on this build for years. Finally we got the combination right and everything was working like it was supposed to. Really good flat power curve. We were able to command what output we wanted at will. No significant back pressure. Lots of room on the turbo. At ambient iats. We did lose a coil pack right at the end. I loaded the car onto the trailer and went Inside to say goodbye to Jason Herrera. (Thanks again stoopidfast)! And then we heard a crash and I come out of the shop to see this…

10/26/2021
(Shameless plug). It’s really too bad I couldn’t get the roll cage any closer to the body…
10/08/2021

(Shameless plug). It’s really too bad I couldn’t get the roll cage any closer to the body…

Happy Independence Day! I didn’t share anything about this at the time but this will always be one of my more emotional ...
07/05/2021

Happy Independence Day! I didn’t share anything about this at the time but this will always be one of my more emotional projects!

04/29/2021

Not to name names, but if your going to give me a “weld on tab” maybe don’t zinc coat it?

Please??? It’s just inconsiderate...

Some of the best off the shelf aftermarket cylinder heads for sbc... still flow less then a k20/f22 head...
03/28/2021

Some of the best off the shelf aftermarket cylinder heads for sbc... still flow less then a k20/f22 head...

“Thank you for purchasing our (very expensive  high quality) swaybar kit. This will make your installation very quick an...
03/28/2021

“Thank you for purchasing our (very expensive high quality) swaybar kit. This will make your installation very quick and easy.” Except for that whole it doesn’t actually fit together part...

Brand new cd000a trans with a warranty... well maybe not now...
03/28/2021

Brand new cd000a trans with a warranty... well maybe not now...

Fun little side project I did a few weeks back. Diesel engine test stand.
10/10/2020

Fun little side project I did a few weeks back. Diesel engine test stand.

It’s been a while sense I’ve posted, I just haven’t had anything really glamorous to show off! Been grinding on getting ...
10/10/2020

It’s been a while sense I’ve posted, I just haven’t had anything really glamorous to show off! Been grinding on getting details sorted out. However I did have the opportunity to do a pretty cool supercharger and exhaust job on a 2017 Nissan NV van. The owner does moble service and between the load of tools and the trailer he pulls he’s just shy of 30000lbs.
He spends hours traveling cross country and really needed the exhaust to be as quiet and as free flowing as possible. I’m happy to say that this exhaust was quieter then stock, (especially at wide open throttle) with no drone. Used 2 ultra quiet vibrant resonators and a dual inlet single outlet walker quiet flow stainless muffler. Dyno before and after was 30whp everywhere without tuning. The JBA headers fit like a glove too!

There’s something so rewarding about setting engines in cars...
04/03/2020

There’s something so rewarding about setting engines in cars...

😱
11/25/2019

😱

When cartoons become reality...

When cartoons become reality...
11/25/2019

When cartoons become reality...

11/07/2019
When your wife tells you that you can make any “one” purchase for your car... .Very impressive package!!!!
11/07/2019

When your wife tells you that you can make any “one” purchase for your car...

.

Very impressive package!!!!

06/20/2019

I love how much personality these classics have.

04/13/2019

It’s almost a car!

04/13/2019

RaceLab Fabrication

It’s been a long time in the making but we had a great dyno day! Thanks to Jason “stoopidfast” and thanks to Serious HP for the hospitality!

04/13/2019

It’s been a long time in the making but we had a great dyno day! Thanks to Jason “stoopidfast” and thanks to Serious HP for the hospitality!

03/19/2019

In case you were were wondering how Art Morrison ships your custom frame to you. This is quite a way to start a project!

10/31/2018

I do have to say I’m impressed at how well the s550 fits in the 69... well except for that poor hood...

Address

Undisclosed Referral Only
South Houston, TX
77043

Opening Hours

Monday 10am - 6pm
Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 10am - 6pm
Saturday 10am - 6pm

Telephone

+17135422557

Alerts

Be the first to know and let us send you an email when RaceLab Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Videos

Share

Nearby autos & automotive services


Other Automotive repair in South Houston

Show All

You may also like