20 by 20 Hot Rods

03/31/2026

What a mess this area was on the 64 lincoln. Just like the other side we fixed a bit ago this drivers side was the same. Cobbled up metal slapped over rust and covered with body filler. Not this time!

02/17/2026

How bad were the floor pans in the lincoln? Being able to remove them by hand bad.

02/17/2026

Working through more unexpected repairs from poor work on the killer 64 lincoln. Some badly installed floor pans that needed addressing.

12/31/2025

As we go into 2026 it will be 8 years with the shop going. Being able to help people with their projects and make them nice is what we set out to do and it's happening. The continued business and trust is appreciated more than can be expressed by some quick writing here.

12/09/2025

Fixing more bad repairs that were uncovered and finishing out the innerstructure that helps support the front bench seat. Everything is now solid and a reinforcement tube runs through the innerstructure to keep the sheetmetal from collapsing.

11/27/2025

A small break from the shop today. Enjoy the holiday!

11/26/2025

Fixing more hacked up work on the 64 lincoln. This is a innerstructure piece that the front seat partially bolts to. Before metal was just slapped over, tack welded then body filled over to hide it. A correctly made piece is now ready to install.

10/24/2025

The side profile of the 64 lincoln is looking killer!

10/17/2025

10/08/2025

Lots of work to make a new outer wheelhouse area on the lincoln. With making the car lower, a different outer quarter skin profile and poor previous work. New pieces needed to happen on the inner sheetmetal. All wrapped up and ready to be welded into the car!

09/10/2025

From rotted to right! A poor repair was hiding in this A pillar, rust covered over with fiberglass. Now it's correct and finished out in lead.