East Speed

Aftermarket and performance retail shop catering in 1979- Current Mustangs with Dyno on premesis.

06/12/2026

Convertible fox in for a heart transplant.

Removed a stock block motor for a Jim Woods 363 paired to Vortech Engineering Inc. 🏁 V3 S trim, all controlled by a Holley terminator x.

The car was also treated to all new suspension by Maximum Motorsports, so now has plenty of power and handles great

Stay tuned, just might be back in the future for a supercharger upgrade….

06/08/2026

Gen3 coyote car in for a cold air intake and custome 93 octane tune.💪💪

06/04/2026

Come see us at the all ford nationals show in Carlisle Pa this weekend June 5th and 6th.

We will be in spots d7-d17 and will be with and , stop by and say hi and get show pricing on parts and tuning!

Also will be here him self doing the tunes!

05/26/2026

Gen 3 s550 in for a laundry list of upgrades…

Started off with billet oil pump gear and crank sprocket and the customer also wanted the timing components changed since we were in there, so went with timing kit.

Then we installed then gen 6 3.0L and a new clutch kit.

Ended up as always with a trip to the rollers with to get it all dialed in.

05/21/2026

C6 Z06 in for a set of long tube headers, carbon cold air intake and a intake manifold with a

Topped off with a trip to the rollers, this car already had a cam installed and heads done by Frankenstein and put down 615 horsepower with the new mods!

05/13/2026

Super clean low miles fox in for a new heater core and a/c evaporator.

Not a fun job to do at home so let us take care of it for you! One stop for parts and install!

05/07/2026

Beautiful 67 mustang originally turned into an Eleanor in 2005 and was only driven 1,000 miles since.

The fuel system was completely trashed unfortunately from all the years of sitting, so all new fuel system components were installed along with new foam in the fuel cell rated for ethanol.

We also updated to electronics with a Holley terminator x system and brought this car back to life.

The final piece was a hydraulic clutch conversion to help make the car easier for the owner to drive, now it’s as good if not better then when it was fished back in 2005!

05/05/2026

26 explorer st in for a intercooler, cold air intake and &loilseparatorco catch can set up.

Once again topped of with a tune from the best

One stop shopping for all your performance needs, hit us up today!

04/24/2026

Holley high ram intake and dual sync distributor install on 94 bronco with a blue print 408. Great looking intake and made big improvements on the lower end and overall driveability of the truck.

04/23/2026

Customer brought us back his f-150 for a yearly once over and had us throw on a set of brake pads with some drilled and slotted rotors.

From full builds to keeping our customers safe on the road, East Speed is your one stop shop for it all!

Address

2019 Lucon Road Suite A
Schwenksville, PA
19473

Website

http://www.eastspeed.net/

Alerts

Be the first to know and let us send you an email when East Speed posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to East Speed:

Shortcuts

Want your business to be the top-listed Autos & Automotive Service in Schwenksville?