Shadetree Kustoms

Shadetree Kustoms Focusing on, but not limited to, Vintage Car & Motorcycle Machining, Fabrication, & Customization. ?

Out with the old, in with the new! Follow along with us on the next project!
02/03/2026

Out with the old, in with the new! Follow along with us on the next project!

There’s a car race at the Shadetree!
08/17/2025

There’s a car race at the Shadetree!

Yesterday we had to say goodbye to Wiley, our sweet shop dog. It was time. We’ll miss you, boy. ❤️
02/25/2025

Yesterday we had to say goodbye to Wiley, our sweet shop dog. It was time. We’ll miss you, boy. ❤️

The beloved Mopar, AKA Baba Yaga, got freshened up with a color matched hood this weekend!
08/12/2024

The beloved Mopar, AKA Baba Yaga, got freshened up with a color matched hood this weekend!

Ever check your axle seals? Blair sure hadn’t. Happy New Year everyone!!
01/05/2024

Ever check your axle seals? Blair sure hadn’t.
Happy New Year everyone!!

We honor all who have served and remember them today.
05/29/2023

We honor all who have served and remember them today.

Finished this encoder mount and belt drive setup for a mini cnc mill
05/26/2023

Finished this encoder mount and belt drive setup for a mini cnc mill

Another satisfied customer. Put new life back in an old BBQ. New 10 ga. Steel floor welded to the bottom for catering us...
04/25/2023

Another satisfied customer. Put new life back in an old BBQ. New 10 ga. Steel floor welded to the bottom for catering use.

If I had a room that would accommodate a five foot wide, twelve foot long table, this would be it.Table by Josh
04/07/2023

If I had a room that would accommodate a five foot wide, twelve foot long table, this would be it.
Table by Josh

Remember Blair’s truck refresh project…. Well, get this.    While the truck has been on the road now for about two years...
04/07/2023

Remember Blair’s truck refresh project…. Well, get this.
While the truck has been on the road now for about two years, it never felt quite right. Scott bought an endoscope to check out the innards and turns out there was a broken piston ring in Cylinder 4 from the start in this brand new GM 350 Crate Motor.
It was a long road, but GM did honor the warranty. The 265hp GM 350 has been discontinued, so whereas they would usually swap out the engine for you, they let him keep the motor and wrote a check for the full purchase price. Huge shoutout to Gary in the parts dept. of the Arroyo Grande Chevrolet Dealer to fight for us little guys.
It seems like there’s always something like this with every old vehicle project. That’s why you don’t see them on the road very much. These old funky machines make you work for it, but man it feels good when you’re going down the road.

It’s been a minute, but we’ve been busy working and making moves. This is the making of a clutch adapter for a tapered c...
04/05/2023

It’s been a minute, but we’ve been busy working and making moves. This is the making of a clutch adapter for a tapered crankshaft. We got an order for 6 of ‘em. Check out the process, and keep us in mind for any doodads you need machined.

Address

Santa Maria, CA

Opening Hours

Friday 8am - 6pm
Saturday 10am - 6pm
Sunday 12pm - 5pm

Telephone

+18058687505

Alerts

Be the first to know and let us send you an email when Shadetree Kustoms posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shadetree Kustoms:

Share