Luz Engineering

Luz Engineering Automotive Design and Engineering Automotive Restoration

New Lotus Twin Cam cylinder head casting with new bronze seats installed and port work started. These castings need a ...
08/17/2022

New Lotus Twin Cam cylinder head casting with new bronze seats installed and port work started.
These castings need a ton of work or of the box.








Freshened up a pair of Weber DCOE 45 152 Italian carbs and getting ready to put them up for sale. 🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮...
08/11/2022

Freshened up a pair of Weber DCOE 45 152 Italian carbs and getting ready to put them up for sale.

🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮🇹 🇮🇹
🏎🏎🏎🏎🏎🏎🏎🏎🏎









Alfa Romeo cylinder head I just finished porting, flowed, valve seats and guides ready to install on new race engine for...
07/28/2022

Alfa Romeo cylinder head I just finished porting, flowed, valve seats and guides ready to install on new race engine for Monterey Historics in August.









Matt and I out in the hills on our adventure bikes a couple weeks ago.
02/12/2022

Matt and I out in the hills on our adventure bikes a couple weeks ago.

1970 Renault Alpine A110 Fitting up body panels, machine up trim parts and fab door panels. Getting there slowly bu...
02/12/2022

1970 Renault Alpine A110

Fitting up body panels, machine up trim parts and fab door panels. Getting there slowly but surely.
💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼💪🏼













Play with a cut up Alfa Romeo 1750 cylinder head today. Trying out some ideas on a race port. Intake only matched to Web...
12/31/2021

Play with a cut up Alfa Romeo 1750 cylinder head today. Trying out some ideas on a race port. Intake only matched to Weber 45’s and we have good low lift numbers and great mid and high lift number.







Vintage Alfa Romeo GTV 1600 cylinder head ported for a hot street car. Before and after flow sheets.👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼...
12/23/2021

Vintage Alfa Romeo GTV 1600 cylinder head ported for a hot street car. Before and after flow sheets.

👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼










porting burrs.

🇮🇹

Rear chassis work on the Quicksilver to allow a larger and better air box for the dual webers. This chassis was original...
12/18/2021

Rear chassis work on the Quicksilver to allow a larger and better air box for the dual webers. This chassis was originally built for a single carb setup. The larger and less restrictive air box picked up 12hp.














Flow testing a Lotus Twin cam cylinder head with 45mm Webers. One has modified throttle shafts and plates, the other is ...
12/18/2021

Flow testing a Lotus Twin cam cylinder head with 45mm Webers. One has modified throttle shafts and plates, the other is unmodified.
On this head there is only the modified carb only picked up 2 CFM from .350” to .550” valve lift.








Alfa Romeo 1600 GTV Hot Street port for 45mm Webers and custom spec cams.
12/09/2021

Alfa Romeo 1600 GTV Hot Street port for 45mm Webers and custom spec cams.









Changing out valve springs on the GT1/Trans Am Camaro. Made up a tool to compress the valve springs in the car. ...
12/04/2021

Changing out valve springs on the GT1/Trans Am Camaro.
Made up a tool to compress the valve springs in the car.








Sunday ride out in the back country with away from everyone. @ Campo, California
04/06/2020

Sunday ride out in the back country with away from everyone. @ Campo, California

Address

3318 Hancock Street
San Diego, CA
92110

Website

Alerts

Be the first to know and let us send you an email when Luz Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Luz Engineering:

Shortcuts

Share