Samson V-Twin

Samson V-Twin The New Alternative for Harley Davidson Service, Repair, and Custom for Southeast Alabama and Northwest Florida.

Cam Time today for Chris Roney’s 2012 ultra. ThunderMax EFI, Headers, and High Flow breather are going on ….
08/27/2024

Cam Time today for Chris Roney’s 2012 ultra. ThunderMax EFI, Headers, and High Flow breather are going on ….

For those that have been asking about the M8 2017-Up Compensator issues, yes they are literally splitting into 3 pieces....
06/24/2024

For those that have been asking about the M8 2017-Up Compensator issues, yes they are literally splitting into 3 pieces.

The Comp Ramp on the left is the Cycle-Rama ramp…CR Comp Ramp M8 Double Heat Treated/ Case Hardened/ REM polished.

The Comp Ramp on the right is the actual factory HD stock replacement.

Zoom in and see the difference. When your comes apart, the bike ain’t moving, and it ain’t gonna start. This is happening all across the board, again on all M8 engines from 2017-Up.

Have yours replaced before yours comes apart.

Call us to schedule yours to be replaced and upgrades 334-997-4906

Thank you Cole, The Hideout, for the awesome opportunity to provide a Banner for your Stage!
05/30/2024

Thank you Cole, The Hideout, for the awesome opportunity to provide a Banner for your Stage!

2023 Roadglide with a little over 500mi, Star 30/30 cam, Thundermax, 6.3 injectors, Bassani 2/1/2 converted to a 2/1, Ja...
05/14/2024

2023 Roadglide with a little over 500mi, Star 30/30 cam, Thundermax, 6.3 injectors, Bassani 2/1/2 converted to a 2/1, Jackhammers…this bike is a great runner now. We used the Star 30/30 per the customers request, it pulls really good midrange.

A Couple of Photos taken by Michael Lichter during the Garage Builders Show in March 2024 at the Broken Spoke Saloon.
05/12/2024

A Couple of Photos taken by Michael Lichter during the Garage Builders Show in March 2024 at the Broken Spoke Saloon.

“Old” is the factory inner cam bearing…note 1/2 as many rollers as the “New” replacement inner cam bearing….99-06 Twin C...
05/09/2024

“Old” is the factory inner cam bearing…note 1/2 as many rollers as the “New” replacement inner cam bearing….99-06 Twin Cam

This was a close one, about to fall over the edge. Perfect example on the 99-06 Twin Cam bikes folks….these spring loade...
05/09/2024

This was a close one, about to fall over the edge. Perfect example on the 99-06 Twin Cam bikes folks….these spring loaded tensioners need to be checked and replaced or trouble will find its way to you soon….

Dino had his 2023 RG S/T Dyno’ed by the Folks in Pinellas Park, Florida… “Those Dyno Guys”, he picked up a good little b...
05/07/2024

Dino had his 2023 RG S/T Dyno’ed by the Folks in Pinellas Park, Florida… “Those Dyno Guys”, he picked up a good little boost, His Stock 117” with only the CR480MT cam, 55mm Ported manifold, Thundermax, S&S 2/1/2 headers, and SVT Boneshakers. Very happy with these results! 141tq/120hp

05/04/2024

it’s the last day for Thunder Beach 2024, selling our mufflers today below dealer cost with free installation on bikes….

now is your chance,

334-997-4906 to save a set if you are on the way

How Fitting, very weird!
05/04/2024

How Fitting, very weird!

Address

1 E Main Street
Samson, AL
36477

Opening Hours

Monday 9am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 4pm

Telephone

+13349974906

Website

Alerts

Be the first to know and let us send you an email when Samson V-Twin posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Samson V-Twin:

Shortcuts

Share

Category