P&B Performance

Directions Contact the business

P&B Performance AUTOMOTIVE , LIGHT TRUCK,RACE CAR,STREET ROD,CLASSIC CAR,MUSCLE CAR REAR AND 4WD FRONT END REPAIR AND MODIFICIATION,HOUSING NARROWING .CUSTOM MACHINE WORK

40+ YEARS DOING REAREND,DIFFERENTIAL,NARROWING,GEARSETS,RACE,STREET,HOTRODS.

CYLINDER HEAD FLOW CHARTnote TO COMPARE TO 600 OR EQUILVANT BENCH ADD 6-8% DUE TO WAY THEY METER AIR
10/15/2025

CYLINDER HEAD FLOW CHART
note TO COMPARE TO 600 OR EQUILVANT BENCH ADD 6-8% DUE TO WAY THEY METER AIR

All the pcs that go with the billet heads are finally done. Here are pics of the head, intake, injectors, stacks. Here a...
10/15/2025

All the pcs that go with the billet heads are finally done. Here are pics of the head, intake, injectors, stacks. Here are the flow sheet for the heads flowed with the complete intake system. Flowed on a 1020 flow bench, if using a 600 or equivalent bench add 6-8 % to these numbers.

Finally got the billet valve covers done with oil filler in 1 cover,oil filler cap shown,pic 3. Injectors on manifolds f...
02/24/2025

Finally got the billet valve covers done with oil filler in 1 cover,oil filler cap shown,pic 3. Injectors on manifolds for our new heads that I will be running on my dragster. Finished exhaust port. Will be flowing head with intake and injectors to get final values as complete setup. Now working on lighting the heads up a little. Ready to sell a set of heads if interested.

Finally got 2 sets finished. Working on valve covers.
06/26/2024

Finally got 2 sets finished. Working on valve covers.

Prototype intake with injector base
05/19/2023

Prototype intake with injector base

Now have the rockers from Jesel
05/19/2023

Now have the rockers from Jesel

Finally remembering to post some new pics of head progress. Ports and chambers are now finally finish machined. Got hold...
04/19/2023

Finally remembering to post some new pics of head progress. Ports and chambers are now finally finish machined. Got hold down bolt placement from Jesel along with prototype rockers. Now on to guides and seats and final flow testing.

After very much machine problems! Finally getting the ports, chambers roughed in!
10/09/2021

After very much machine problems! Finally getting the ports, chambers roughed in!

Outside of new heads done
03/16/2021

Outside of new heads done

Finally cutting metal for new cylinder heads
02/16/2021

Finally cutting metal for new cylinder heads

Address

Salisbury, NC
28146

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 4pm
Saturday 10am - 3pm

Website

Alerts

Be the first to know and let us send you an email when P&B Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to P&B Performance:

Shortcuts

Share

Category