Hager Repair and Restoration

Hager Repair and Restoration Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Hager Repair and Restoration, Automotive repair centre, Saint Charles, MN.

02/05/2021

Finished up putting the xt back together and got a chance to hear her run again. New engine and rebuilt hydraulic pump. Gotta find a way to get the engine broke in once this cold snap is over with.

A few projects happening in the shop. My 190xt is under the knife getting an overhaul. Also some side panels we did f...
12/21/2020

A few projects happening in the shop. My 190xt is under the knife getting an overhaul. Also some side panels we did for a customer's 8070.

Just finished a project of a different size. This is the pedal tractor I had as a kid and was originally badged a Deut...
08/29/2020

Just finished a project of a different size. This is the pedal tractor I had as a kid and was originally badged a Deutz-Allis 9190. It has now been badged as a 190xt. It will be used as part of our wedding decor next month.

Had some fun with this little project i did for a customer, although a few headaches occurred along the way. Cut down ...
04/17/2020

Had some fun with this little project i did for a customer, although a few headaches occurred along the way. Cut down an IH 56 planter from 4 rows down to 2, which he will use it to plant sweet corn. The fertlizer unit and markers are still fully functional which took a little engineering. It was a good way to pass the time while we are on "lock down" and the weather is not quite farming weather lately. Hopefully spring will be here soon.

With all that's going on in the world and crummy weather, boredom got the best of me, so I spent some time making the ug...
03/29/2020

With all that's going on in the world and crummy weather, boredom got the best of me, so I spent some time making the ugly duckling in the family a little less ugly. The grill got some new paint, hood got some attention, added the air stack, and made a new set of steps from a k&m step kit i found off a 7000 yesterday in the salvage yard. Someday it will get new paint, but this will do till then.

Had a lot of time to spend this weekend finishing getting my 190xt put back together. Nice having a power director tha...
03/23/2020

Had a lot of time to spend this weekend finishing getting my 190xt put back together. Nice having a power director that works like it's supposed to and actually has a neutral again. Also got a few pictures of the old parts that had seen better days.

My own 190xt has been under the knife the past couple weeks to replace the input shaft seal. Also decided to rebuild t...
03/21/2020

My own 190xt has been under the knife the past couple weeks to replace the input shaft seal. Also decided to rebuild the power director which someone fried at some point before i bought it. Surprised it still worked as bad as it was.

Had this 1655 Oliver in most of the winter, but tomorrow it goes home and back to work. While it was here it got a new ...
03/21/2020

Had this 1655 Oliver in most of the winter, but tomorrow it goes home and back to work. While it was here it got a new head gasket, new clutch, the over/under was rebuilt and also a new set of brakes. Had a lot of time in this one but fixed several issues.

Oliver 1655 over under rebuild in progress. Each clutch section has been gone through and new seals, gaskets and o ring...
02/08/2020

Oliver 1655 over under rebuild in progress. Each clutch section has been gone through and new seals, gaskets and o rings. Ready to put it all back in one piece.

Some of the things we've worked on over the past several years.
01/18/2020

Some of the things we've worked on over the past several years.

Nice little d15 series 2 came in Saturday for a little tune up and to fix a couple leaks.
01/15/2020

Nice little d15 series 2 came in Saturday for a little tune up and to fix a couple leaks.

Oliver 1655 diesel getting a head gasket, over/under rebuild, and some brake work.
01/04/2020

Oliver 1655 diesel getting a head gasket, over/under rebuild, and some brake work.

Address

Saint Charles, MN
55972

Website

Alerts

Be the first to know and let us send you an email when Hager Repair and Restoration posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category