31 Services

31 Services Mechanical Repairs, Machining, Prototyping, Welding, Production, Laser Cutting/Engraving 3D Printing. I am a mechanical designer and machinist by trade.

I enjoy everything from prototyping and small runs to restoring equipment and antiques. I have a well equipped shop and can do more for less due to little overhead. If you have something that needs done let me know, I'll be honest and upfront with you.

Few pics if current projects in the shop. The Cub Cadet got all new belts,rear tires, carb, blade sharpened, and a full ...
06/03/2026

Few pics if current projects in the shop. The Cub Cadet got all new belts,rear tires, carb, blade sharpened, and a full service.

The Chinese skid loader has just over 3 hrs on it and got new fluids, a weight mounting system and a plethora of other minor issues resolved you shouldn't have on a new machine.

The UTV is in for carb and fuel pump issues

The Thunderbird is done and ready to go home! Can't see all the wiring done as its wrapped up and under the dash where i...
05/29/2026

The Thunderbird is done and ready to go home! Can't see all the wiring done as its wrapped up and under the dash where its supposed to be. I finished the 3d prints with flocking to give it that final touch.

If anyone is looking for a 130-70R18 tire let me know. I got a new Shinko Advance ill make someone a deal on.
05/25/2026

If anyone is looking for a 130-70R18 tire let me know. I got a new Shinko Advance ill make someone a deal on.

The YZ250F was finished and picked up. Also working on a small Cub Cadet CC30 rider that sat for about 2 years. Its neve...
05/25/2026

The YZ250F was finished and picked up. Also working on a small Cub Cadet CC30 rider that sat for about 2 years. Its never a good thing when there is algae growing in the carburetor!

Work continues on the Thunderbird. All the wiring is complete now and the 3D printer is working on a 11+hour print of a...
05/25/2026

Work continues on the Thunderbird. All the wiring is complete now and the 3D printer is working on a 11+hour print of a custom mount for the Aces Fuel Injection display and ECU. It will be concealed in the glove box. This project will be wrapped up this week if all goes well.

Lots of progress on projects today. The Yamaha is already picked up after a valve coverre seal and thermostat replacemen...
05/19/2026

Lots of progress on projects today. The Yamaha is already picked up after a valve coverre seal and thermostat replacement. The Kawasaki is tore down and waiting on the new axle. The YZ250f is done except for 2 small parts to be delivered. Also knocked out the Honda generator and a grass seed spreader repairs!

05/18/2026

Fired up the YZ250F for the first time today. Waiting on swingarm bearings and thus one will be done.

Shops full of projects. Slowly chipping away at the backlog.
05/15/2026

Shops full of projects. Slowly chipping away at the backlog.

Forks rebuilt and installed back on the R6. Next up is a rear tire,power commander, oil change and front sprocket chang...
05/12/2026

Forks rebuilt and installed back on the R6. Next up is a rear tire,power commander, oil change and front sprocket change.

Snuck in a bit of work in this morning and got the forks pulled off the R6. They are getting new seals and fluid flush.
05/10/2026

Snuck in a bit of work in this morning and got the forks pulled off the R6. They are getting new seals and fluid flush.

Address

Ruffs Dale, PA
15679

Website

Alerts

Be the first to know and let us send you an email when 31 Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 31 Services:

Shortcuts

Share

Category