ApexTorque

01/10/2023

Introducing the GT500 Harmonic Balancer Stud Kit! Our kits use our alloy's incredible strength to push crankshaft reliability to a new level. These kits deliver 30,000 pounds of clamp load, massively reducing the ability of the harmonic balancer to damage the keyway and crack the crankshaft nose. Combine this with Boundary's GRIP sprocket for the perfect combination.

99$ - Balancer Stud Kit (GT500 and COYOTE)
169$ - GRIP Sprocket (11-14 or 15-Present)

https://apextorque.com/shop/ford/predator-5-2l/gt500-harmonic-balancer-stud-kit-copy/

https://boundarypumps.com/shop/ford/coyote-crankshaft-timing-sprocket-with-grip-surface/

11/19/2022

Our quality and shipping teams are hard at work even on Saturday packing out products! If you've been waiting, we've been pushing for you!

11/15/2022

Our new 3UR-FE Head Stud Kit just dropped in our hellfire red protective coating along with our 280,000 PSI material!

Our stud kits are cut and rolled from billet steel containing our proprietary triple temper, 2-stage heat treat, and alloy combination. This material gives an ultimate strength of 280,000 PSI and a…

10/27/2022

Testing our new GT500 crank studs to breaking. They pulled past 32,000 pounds of clamp at 200 ft/lbs of torque on a 12mm. We stopped when we realized an inch of thread was being pulled out of the hardened steel anchor. We are just going to list the rating as "unbroken"

10/19/2022

Got some LS Head Stud Kits fresh out of heat treat and ready to lock down your engine with 290,000 PSI!

10/07/2022

Keep your head clamped and your mains planted with 25% more strength than the competition and 15% more head clamp at the same torque!!

09/30/2022

BP head studs heading out the door for FAB9 Tuning !

08/19/2022

12MM and packing out today!!

https://apextorque.com/product-category/ford/coyote/

08/18/2022

Failure pull for 12mmx1.5 gave us a whopping 31,300 pounds! 12mm×1.5 stud at 175 ft/lbs. Giving a tensile load of 280,000 psi at break!

https://apextorque.com/shop/ford/coyote/cm-hbb/