Luke's Link

07/06/2017

Dodge Trucks have been notorious for bad steering. Play, wondering or drifting in the steering, that will develop into a
violent shake known as the death wobble when hitting a bump.
The cause of this problem is the track bar. Most don't know about the track bar in the Dodge Ram. It is the bar connected from the Axle to the frame. One end is a Ball joint end and the other is a Bushing. Once the Ball joint end gets loose, the track bar moves up and down on the ball stud. Internally in the ball stud end, there is a 2 coiled metal spring that hold pressure against the ball stud to keep it tight. Once the spring wears down, it allows the track bar to move up and down on the ball stud. This is where the wondering comes from. This is the main cause for wondering and shake. The shake is when hitting a bump on the highway at speeds above 50mph, it causes vibration in the axle and sent through the track bar which is attached to the frame which causes the frame of the truck to shake. This is why you must slow the truck down to get it to stop.
If your truck drifts or wonders, the track bar being loose causes this. When you turn the steering wheel, it moves the truck and the little play in the track bar allows the truck to drift that little extra so you are always correcting the steering.
Luke's Link converts your weak ball joint end to a fully adjustable end that is guaranteed to never wear out and keep your truck driving straight down the road. This kit is greaseable and fully adjustable, adjustments can be made by adding spacers. This is not a temporary solution, it is a lifetime solution. Luke's Link is designed to work on the track bar as well as any of the 4 tie rod ends on your truck from 1994-2002. Luke's Link offers a lifetime guarantee on all our products.

Note: This kit will not work on Moog Track bars, This is a aftermarket bar that measures 2 1/8" in diameter across grease fitting.

Luke's Link will work on any Dodge Ram 4X4, any make, any model, Gas or Diesel.

07/06/2017

JEEP
Luke's Link will work on the Jeep track bars from 1980-2007. This will solve the death wobble and wondering in the Jeep steering. They are fully adjustable and greaseable.

07/06/2017

FORD

Luke's Link kits will rebuild any of the Ford Tie Rod Ends from 1980-1997. They will work on any of the four tie rod ends. These are the same kits that work on the Dodge trucks. They are fully adjustable and greaseable.

07/06/2017

Dodge Trucks have been notorious for bad steering. Play, wondering or drifting in the steering that will develop into a violent shake known as the Death Wobble when hitting a bump.

The cause of this problem is the track bar. Most don't know about the track bar in the Dodge Ram. It is the bar connected from the axle to the frame. There are bushings on each end. Once they wear out, the track bar moves up and down. This is the main cause for the wondering and shake. The shake happens when hitting a bump on the highway at speeds above 50mph. Hitting a bump causes the axle to start vibrating and sends the vibration through the track bar. The track bar being connected from the axle to the frame causes the truck to start shaking. This is why you must slow the truck to almost a stop to get the bar to stop shaking.

If your truck wonders or drifts, the track bar will also cause this. When you turn the steering wheel, it moves the truck and the little play in the track bar allows the truck to drift or wonder that little extra so you are always correcting the steering.

Luke's Link has the solution. For the 2003-2007.5, we offer the upgraded Polyurethane bushings to replace the stock rubber bushings. These are sold in sets. One for each end. No reason to spend the money on the whole bar when all that wears out are the ends. This will tighten up the steering and keep you straight down the road.

For the Tie Rod Ends, Luke's Link will work on any of the four ends. Luke's Link will convert your ends to a fully adjustable end. No more spending money on bars when all that wears are the ends. These are greaseable and fully adjustable. If for some reason you ever had a little play, you can easily adjust by adding a spacer. Take a couple of minutes to adjust.

(Please note: these will only work on 3rd Generation parts. They will not work if you have the upgraded 2008 setup from Dodge.)

Works on all makes and all models, gas or Diesel.

Luke's Link Track bar bushings and Tie Rod End Kit.

Dodge Trucks have been notorious for bad steering. Play, wondering or drifting in the steering that will develop into a violent shake known as the Death Wobble when hitting a bump.

The cause of this problem is the track bar. Most don't know about the track bar in the Dodge Ram. It is the bar connected from the axle to the frame. There are bushings on each end. Once they wear out, the track bar moves up and down. This is the main cause for the wondering and shake. The shake happens when hitting a bump on the highway at speeds above 50mph. Hitting a bump causes the axle to start vibrating and sends the vibration through the track bar. The track bar being connected from the axle to the frame causes the truck to start shaking. This is why you must slow the truck to almost a stop to get the bar to stop shaking.

If your truck wonders or drifts, the track bar will also cause this. When you turn the steering wheel, it moves the truck and the little play in the track bar allows the truck to drift or wonder that little extra so you are always correcting the steering.

Luke's Link has the solution. For the 2003-2007.5, we offer the upgraded Polyurethane bushings to replace the stock rubber bushings. These are sold in sets. One for each end. No reason to spend the money on the whole bar when all that wears out are the ends. This will tighten up the steering and keep you straight down the road.

For the Tie Rod Ends, Luke's Link will work on any of the four ends. Luke's Link will convert your ends to a fully adjustable end. No more spending money on bars when all that wears are the ends. These are greaseable and fully adjustable. If for some reason you ever had a little play, you can easily adjust by adding a spacer. Take a couple of minutes to adjust.

(Please note: these will only work on 3rd Generation parts. They will not work if you have the upgraded 2008 setup from Dodge.)

Works on all makes and all models, gas or Diesel.

Luke's Link Track bar bushings and Tie Rod End Kit.

04/26/2017

http://lukeslink.com/

Dodge Ram Track Bar, Tie Rod Ends, Wondering, Death Wobble, Shake, 3rd Generation, 2nd Generation, Ford Tie Rod End, Jeep Track Bar