Chris Nowack Racing

06/04/2021

12/02/2019

If you need cast iron parts repaired we can help. These 351C 4v heads had severe corrosion between chambers. We welded them up with real cast iron filler, not nickel, and minimal heat and distortion.

09/16/2019

Cylinder Head Repair of any magnitude is no problem! Melt one in half? We can put it back together complete with any seats, guides, valve job, and flow bench work you might desire.

04/09/2019

We can flow, dyno test, and develop intake manifolds to improve AFR distribution but we also can use our In-cylinder diagnostic system to see how good the mixture is in individual cylinders. We cut 2 inches out of the entire plenum in order to correct major issues.

04/09/2019

Welding up a set of heads that needed repair. These are now ready for machining and assembly. No matter how bad they are destroyed, we can fix you up! AND FAST!

03/23/2019

Thanks for letting us be a part of your awesome project Troy LaCrone! What a work of art. Let's go testing!

Very first hole shot 5 minutes after firing it up for the first time. 56% nose weight, no burn out, zero rubber down, back out of shop, stab it and it leaves hard enough to cause a sore neck and pack some air. That is with the track tires, the soft ones will hook harder. Beilman Fabrication chassis is going to put the smack down on the street this year. Get your money ready. Blue Madness it alive and ready to hurt feelings.

The flag in the background says it all, America!

03/23/2019

Working late all week with Troy LaCrone to wire up all the new nitrous stages. We used Tefzel wire and Raychem sleeving to keep the harness for 3 kits to nearly the same diameter as the previous single kit harness. Thanks Prowire.com for helping us with the wire and supplies.

Current state, wiring palooza with Chris Nowak Racing.

03/17/2019

It was a great week hosting Troy LaCrone - Drag Racing, Drag Week - Grudge / Outlaw Events and gathering in-depth data via our TFX system to ensure his tune was safe before adding nitrous.

03/16/2019

Having a great time with Foxwell Motorsports Troy LaCrone - Drag Racing, Drag Week - Grudge / Outlaw Events and Top Secret Speed

03/15/2019

Needed a new part mid Dyno session. No problem and no wait!

03/14/2019

Getting ready to start tuning!