Abe's Custom Painting

10/11/2025

Mr Mel Vaughan’s 1962 Chevrolet Bel Air bubble top painted black with house of kolor violet pearl on top

10/11/2025

04/04/2025

Repairs on this 63 Chevy truck back to pre-accident condition. Thanks to for nailing the color match on this one.

08/09/2024

01/30/2024

Here is a cool one we got do, all the sheet metal and lead work for a customer some years back. The Tom Hocker 40 ford coupe originally built by George Barris. It will be featured at the Grand National Roadster show this week. The car as you will see in photos had a large amount of work done. We had to tear through years of bad repair work unfortunately we could not save some of the panels. Car was sent off to media blast and the restoration begins. We replaced the complete floors, firewall, r/l side cowl panels, door skins keeping the original door shells, rework and welding in rear fenders, rear section of car, redoing the chop in some of areas of the roof, the front hood nose was patched, and complete front end around grill area reworked to be able to get nice gaps throughout. There is so much we did but the finished results in the final lead work turned out awesome the photos speak for themselves. The refinish work was done by another shop. I had 2 of the best fabricators help me on this one Chino (RIP) and Jesus who helped finish dialing things in with his amazing lead work.

#1940

01/27/2024

The picture on bottom corner was car in its former glory not going back to that paint scheme.
We did all body work including fiberglass/carbon fiber work and paint, many hours to get it to this point.

01/23/2024

1959 Cadillac convertible, replacing front lower left quarter panel and inner jamb area. I hand fabricated parts and welded into place. Hammer and dollied quarter panel where tig welded together.

12/15/2023

Indian parts for

07/29/2023

1969 BSA victor special, painted 52 pieces to this bike here a few of the last. Decals I applied and striped the white between yellow and polished edge.

02/08/2023

A lot of cool details on this coupe we did some time ago. One of my favorites is the rear pan, I installed rear taillights, fabricated the tubes to hold lights in place and added the detail around the opening, rear pan as well to fit shape of body. Frame rails body-worked and painted to match the finish on body.