High Lakes Restorations

High Lakes Restorations High Lakes Restorations specializing automotive restorations , customs, fabrication, and dyno service.

08/08/2022

Hi Everyone, Will at High Lakes Restorations, We are making a new Facebook account because this one has been lost to technical difficulties. You can still look at previous work on this page. New work will be on the new page. Thank you

After we bag and tag all of the parts from disassembly we brace up the body and lift the body off the frame. Next step i...
07/25/2022

After we bag and tag all of the parts from disassembly we brace up the body and lift the body off the frame. Next step is going to be mounting the body on a rotisserie. The bracing you see is to keep things from moving since it will not have support of the chassis .

Disassembly process has been fun on this blazer. During this process we bag and tag each part being taken off and organi...
07/19/2022

Disassembly process has been fun on this blazer. During this process we bag and tag each part being taken off and organize them for easier assembly. This is also when we order parts that will be needed later. We will be posting more about our disassembly process later this week.

Starting a new project is always a good time, especially when its a 1972 4x4 blazer! If you need restoration work done t...
07/08/2022

Starting a new project is always a good time, especially when its a 1972 4x4 blazer! If you need restoration work done to your classic give us a call at 541-948-4260 or visit our website at highlakesrestorations.com

Worth the wait on this Atlas transfer case. This one is going in our full size jeep build. If you need any work done on ...
02/22/2022

Worth the wait on this Atlas transfer case. This one is going in our full size jeep build. If you need any work done on your classic give us a call at 541-948-4260 or visit our website at www.highlakesrestorations.com

Had a fun time working on this 57 panel. Came in because the rear latch wouldn't open, we ended up finding out the actua...
12/06/2021

Had a fun time working on this 57 panel. Came in because the rear latch wouldn't open, we ended up finding out the actuator was only 2 lbs and these panels had 2 latches on either side that take a lot more then 2 pound actuators to open so we put a 35lbs solenoid in there and it opened right up. If you need any work done on your classic give us a call at 541-948-4260 or visit our website at www.highlakesrestorations.com

LS3 test fitting into this full size jeep pickup. if you need any restoration or modification to your classic give us a ...
09/14/2021

LS3 test fitting into this full size jeep pickup. if you need any restoration or modification to your classic give us a call at 541-948-4260 or visit our website at highlakesrestorations.com

Soundproofing around the transmission tunnel cuts down a lot of noise and vibration on these older classics. If you need...
09/13/2021

Soundproofing around the transmission tunnel cuts down a lot of noise and vibration on these older classics. If you need any restoration or modification to your classic give us a call at 541-948-4260 or visit our website at highlakesrestorations.com

Did another set of exhaust cut outs but this time on the 68 nova. If you need any restoration or modification to your cl...
09/10/2021

Did another set of exhaust cut outs but this time on the 68 nova. If you need any restoration or modification to your classic give us a call at 541-948-4260 or visit our website at highlakesrestorations.com

08/11/2021

Perfection Plus Auto Salon , We at high lakes restorations aren't sure what you're talking about. What heat wave? It's as cool as can be over here.

Working on some control arm bushings on our new lathe. Most of the parts we get into the shop we have to modify to fit p...
08/04/2021

Working on some control arm bushings on our new lathe. Most of the parts we get into the shop we have to modify to fit properly. if you need work done on your classic give us a call at 541-948-4260 or visit our website at highlakesrestorations.com

this 29 model A has officially started its assembly, super cool story behind it. It was found off the Oregon trail more ...
08/03/2021

this 29 model A has officially started its assembly, super cool story behind it. It was found off the Oregon trail more then 60 years ago and its frame ended up needing replaced for a better ride and a new killer look. if you need any work done on your classic call 541-948-4260 or visit our website at highlakesrestorations.com

Address

810 NE Hemlock Avenue
Redmond, OR
97756

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when High Lakes Restorations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to High Lakes Restorations:

Shortcuts

Share

Category