Velocity Motorworks, LLC

Directions Website

Velocity Motorworks, LLC Automotive service and repair At Velocity Motorworks, we specialize in...

Custom Builds: Our build process starts with the car owner.

The car owner has a vision and we will work with them to bring that vision to life. With our engineering and design backgrounds, we are able to create their vision at a pace they are comfortable with. Maintenance: We can service all years, makes, and models. Some of the maintenance and repair work includes:
• Engine/transmission diagnostic
• Fluid Service: Engine oil/filter, Transmission fluid/filter, Brake flush, Differential fluid, Cooling system, Power steering
• Brakes - Pads & rotors
• Tires - Mount & balance, Alignments
• Standard maintenance interval service 30k, 60k, 90k, 120k mileage
• Miscellaneous repairs

Track Prep: Our track day inspection follows HPDE guidelines, checking wheels & tires, brakes, steering & suspension, safety equipment, and engine. We also recommend an alignment and brake bleeding in order to achieve the best performance at the track.

What if you want to haul butt.... and the family?You snag a Hellcat Durango! This dang near brand new (4400 mi) 2026 He...
10/09/2026

What if you want to haul butt.... and the family?

You snag a Hellcat Durango!

This dang near brand new (4400 mi) 2026 Hellcat Durango came in for a set of bolt-ons and exhaust. It got a JLT CAI, JLT Oil separator/catch can, Borla ATAK Catback exhaust, and we completed an engine oil and filter service.

Check out the video clip for the exhaust sound! It's a rowdy sounding beast!

Fitting for !

How about a with a MINTY 9k mile Camaro SS?!This beautiful ride has been sitting for a bit, so we cleaned the injector...
10/08/2026

How about a with a MINTY 9k mile Camaro SS?!

This beautiful ride has been sitting for a bit, so we cleaned the injectors, replaced the fuel pump, and changed all of the fluids.

It fired right up after that!

What early '00s tune would you be jamming with the t-tops off for a cruise in this time capsule?!

One of the hardest things to find is a shop willing to do modified alignments and do them well. Your hunt ends here! V...
10/07/2026

One of the hardest things to find is a shop willing to do modified alignments and do them well.

Your hunt ends here! Velocity Motorworks has got you covered. This M3 race car is on the rack today and there's not a thing that's untouched under it.

Whether your car is bone stock, has a set of springs on it, or the suspension is modified from stem to stern; we'll get you dialed in.

Give us a shout to get on the schedule today!

Do you know what separates us from your run of the mill shop?Creativity and capability.Take this Cutlass for example. I...
10/06/2026

Do you know what separates us from your run of the mill shop?

Creativity and capability.

Take this Cutlass for example. It's a SUPER clean car. It has Holley Terminator X Stealth installed by us a while ago.

With factory AC and OEM mechanical fan it struggled to run cool. Sitting idle with the AC on for too long and engine coolant temperature would creep up to 225F.

The customer wanted a fan upgrade solution that would blend in and look as OEM as possible. Also he did not want the noise of electric fans with only high speed option.

We sourced a PWM fan with a maximum flow of 3700cfm and fabricated a bracket to mount the fan inside the OEM fan's shroud. We configured a custom table in the Holley Terminator X to control the fan speed vs coolant temperature and air conditioning.

All boxes ticked. Retain OEM shroud and OEM look, runs at 50% speed or less most of the time, engine coolant temps are 192-202F with the AC on a summer day.

Do you have a classic car that needs a cooling fan upgrade or one that struggles to maintain coolant temps below 220F?

We have a solution. (Also we can run this fan with a stand alone PWM fan controller. Holley EFI is not required).

Don't lie.You've panicked at a red light until you realized it was someone else's car.We definitely have! 🤣And if it is...
10/02/2026

Don't lie.

You've panicked at a red light until you realized it was someone else's car.

We definitely have! 🤣

And if it isn't someone else's ride, you can call us!

We're doing it again!October 31st – 10am -2pm come celebrate Halloween with us at our fall open house!Cruise in with you...
10/01/2026

We're doing it again!

October 31st – 10am -2pm come celebrate Halloween with us at our fall open house!

Cruise in with your:
~ Classic muscle cars/trucks, Restomods or Pro-touring builds
~ Modern V8 muscle
~ Race Cars
~ Motorcycle
~ Offroad

Costumes and “tricked” out cars are encouraged but not required!

We'll have:
~ Games and treats for the kids
~ Food Truck will be onsite
~ Dyno exhibition runs 500rwhp to 1000+ rwhp vehicles

See the second image in this post for the parking layout.

Please park in the areas outlined in green.

You can park along Ice Drive, but avoid blocking the road. Trucks will periodically be driving in/out of the Reddy Ice facility that is at the end of Ice Drive.

See you all on October 31st!

We're your one-stop shop for Modern Mopars!Whether it's basic bolt ons, MDS service/deletes, dyno tuning, full builds, o...
09/30/2026

We're your one-stop shop for Modern Mopars!

Whether it's basic bolt ons, MDS service/deletes, dyno tuning, full builds, or forced induction; we can help!

Our power packages are a fantastic way to take the guess work out of modifying your Mopar as well.

Drop us a line to chat about your goals or needs!

How about a little spice?Nothing like a powered Gen 3 Coyote !Over time, we've seen numerous platforms define horsepo...
09/28/2026

How about a little spice?

Nothing like a powered Gen 3 Coyote !

Over time, we've seen numerous platforms define horsepower in their era.

The small block Chevy, the Windsor pushrod 302/351 Ford, the LSX engine, the Coyote engine; all of these platforms redefined "easy" power in their hay day and most of them still come out swinging today.

What's been your favorite power house platform?

Here's a neat one that's come through the shop.This orange beast is a Factory Five Racing GTM. It's in for a bit of Hol...
09/25/2026

Here's a neat one that's come through the shop.

This orange beast is a Factory Five Racing GTM.

It's in for a bit of Holley EFI fine tuning and a nitrous system... 😳

We love the unique stuff!

09/24/2026

Lord have mercy...

Listen to this gorgeous first gen Camaro! 😍

Whether it's a modern or classic muscle car, we specialize in maintenance, building, and upgrading all of them! Give us a shout regarding your project for a one-stop solution to your needs.

Address

6241 Westgate Road Ste 125
Raleigh, NC
27617

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 5:30pm
Thursday 8am - 5:30pm
Friday 8am - 5:30pm

Website

Alerts

Be the first to know and let us send you an email when Velocity Motorworks, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category