Roxbury Racing Transmissions

07/01/2026

Is your combination not quite right. Looking for a different gear ratio? We have 96 9” ring and pinions in stock. 29 gear sets ready to run. We have 5.37, 5.50, 5.57, 5.75, 6.14, 6.40, and 6.43 in stock on the shelf.
Quick change racers, we have 62 different ratios in stock for our loaner program if you are not sure what you need. Also, we can repair your Quick change.
16 8” gear sets for the Mod-4 racers in stock. FOG 1.81, 1.97, and 2.14 in stock. Have 14 rebuilt and ready to go and more to get to.
For the 3speed racers, have three ready to go, regular and light weight gear delete.
Still building converted and direct drive powerglides. They are still winning races. Hope to be able to get some done on the shelf shortly.
For the Pure Stock racer even though the Metric 200 is not my favorite transmission to build we are still building them.
Have a group of Bert Gen 1, Bert Gen2, Brinn, Falcon, Jerico transmissions in stock that need to be checked over and gone through for sale as soon as I get time to get to them.
Did I mention that I am still building KSE pumps for you.
I almost forgot to tell you that we have our new larger REM polishing equipment up and running. If you need your gears done we now do it in house so there is no need to ship them out and back.
For those of you that were concerned that the WISSOTA rule change would kill us . I think that most of you have known me long enough to know that I do not know how to give up.
Thanks to all of you for your support and we will always do what we can for you.
Stay safe this weekend and have fun. Remember family is always first.
Thanks Jim

05/23/2026

Have a new cell phone. Number is still the same. Now just need to find out how to use it. I think that I am up and running. Will try to check and answer any messages that were left on the old system. New phones are so much fun. Jim

Send a message to learn more

05/21/2026

Cell phone has died. If you need to contact me use shop line. 763-389-1150.
Thanks Jim

04/28/2026

Mod-4 racers, we are finally getting our FOG Transmission Program updated. We have many cores, large selection of what is left of OEM Ford parts and a supply of rebuilt transmissions in stock. All ratio, standard or polished gear sets. Getting more parts in daily to repair your broken transmissions, still not great but better than it has been. Our new in-house larger tumbler allows us to do transmission and rear end gear polishing in a timely manner buy not having to ship the gear sets out and back in to be done. Should have it all up and running in a week or so.
Some info for those of you that are always checking transmission tags for gear ratios. This year our checking ratios with our gear ratio test we have found that about 1/3 of all the transmissions that we checked the tag was wrong on the ratio of the transmission. Most that we checked were fresh take outs from yards that had not been worked on so my belief is that ford send out some transmissions that were not what they thought. Always check.

04/04/2026

Easter Update:
Still snowing and very busy in the shop. As we get closer to racing I will not be answering the shop phone during the day. If you call leave a message and a number and I will get back to you. Will be checking the voice mail at noon and 5:00. If you leave a message please let me know the best time to call or be sure that the number that you leave has a voice mail that is set up and that your mail box is not full. Schedule at this point is that I have six direct drive Powerglides to get done that are all apart, cleaned up and the machine work do. Would like to have them all done this week. I will call you when I get yours done. Does not help to call twice a day to see if yours is done. From there it is on to FOG Mod-4 transmissions. I think that I have 2- 2.14 and 7- 1.97 and 1 1.81 Polished done. Have 6- 1.97 apart, cleaned and checked over that need to be put back together. Have a truck coming up from down south next weekend that will have 5-1.97 and at least 1-1.81 or more on it. We are polishing a couple loads of gears so some more of these transmissions will have polished gears. From there we go to Bert, Brinns and Falcons. I will be selling 4 Berts, Brinns, Falcons, and Jericos that I have rebuilt but have been setting so I am going to check them over and than I have 5 more broken that I will be rebuilding to sell. From there I have a couple of gear sets to do. We have 8” and 9” Polished or unpolished 8” and Polished and or light weight 9” gear set in stock . Have 14 sets of gears done on the shelf so may have the set that you need done or have 150 sets of ring and pinions so can build for you. Also have 5 Saginaw Three Speeds done set up for long yoke, some light weight gears. Did three KSE Pumps last week so remember we have a good supply of KSE parts and can do yours for you.
This does not mean that we that we are not taking in any more work. We are working 7 days a week to get everyone racing. If we can be of any help, please call us so that we can get you on the schedule.
Have a great Easter.
Thanks
Jim

03/27/2026

Any one down south driving up through Tennessee looking to make as couple bucks picking up a small pallet of transmissions and bring them up. Should be about 400 lbs. Or any one know of a HotShot or LTL that will ship them at a reasonable price . Thanks Jim

Send a message to learn more