Blockhead Racing Concepts

Blockhead Racing Concepts application specific builds
lap times over dyno numbers
engine building
chassis
suspension
porting
tuning
so much more

Well after 4 years Blockhead Racing Concepts will be reopening in the near future. Specializing in engine building of a...
06/12/2023

Well after 4 years Blockhead Racing Concepts will be reopening in the near future. Specializing in engine building of all applications such as drag racing, dirt track, micro sprints, street/strip, SXSs, 4 wheelers, motocross, snowmobiles, snowbikes, you name it. If it runs with a spark plug there's a strong possibility that we'll build it. Will also be doing dirt bike suspension for woods, desert, motocross, Supercross, etc. Please hit that like and share button while we the business up and running again.

Bmod ready to rock just gotta put accessories on. Personally enjoying the color combo.
05/24/2019

Bmod ready to rock just gotta put accessories on. Personally enjoying the color combo.

Well the 416CID made decent power on the dyno today. Cam is a little too big but the customer got the sound he wanted a...
05/20/2019

Well the 416CID made decent power on the dyno today. Cam is a little too big but the customer got the sound he wanted and is happy with the numbers. 586hp @ 6800 and 485lbs/ft @ 5800. Should be a fun little engine to drive around and do burnouts with.

Wissota Bmod concept short block finished up with and ready for pickup. Now to build the Bmod open engine and pack to...
05/16/2019

Wissota Bmod concept short block finished up with and ready for pickup. Now to build the Bmod open engine and pack to move south.

416CID is ready for the dyno. Oil system primed and ready to go. Onto the next build. ...
05/13/2019

416CID is ready for the dyno. Oil system primed and ready to go. Onto the next build.

05/09/2019

full mod engine in for a top. Was replated after porting and hasn't been apart since last year. Engine has 43 hours on it since it was built.

Waiting on a few last minute parts to show up for the now 416CID SBC blocked, headed, 11.24:1 street monster. +.3...
05/08/2019

Waiting on a few last minute parts to show up for the now 416CID SBC blocked, headed, 11.24:1 street monster. +.300" solid roller lifters, with 4/7 swap, pushrods, aluminum full roller rockers, Comp cams stud girdle, comp cams adjustable double roller timing set with billet gears, with comp cams roller cam button and a to be mounted on top with a 950CFM carb. Being fed 110 octane Sunoco fuel supplied out of a local gas station. Should be a fun little engine to drive around on Sundays.

Rest of engine specs are as follows. 3.900" stroke, 4.125" bore, .630"/.680" valve lift, 273/287 @.050" duration on a 112 LSA, flat top 2 valve relief , 70cc chambers, 2.05" intake valves, 1.60" exhaust valves, 200cc intake runners before porting was done, ARP rocker studs, main studs, heads studs, and mildly ported intake.

The LS turbo build got dropped into the S10 by
04/30/2019

The LS turbo build got dropped into the S10 by

Bolting the heads on this turbo LS expecting to make over 1000hp on a 76mm turbo running pump gas in the morning. I b...
04/26/2019

Bolting the heads on this turbo LS expecting to make over 1000hp on a 76mm turbo running pump gas in the morning. I beam connecting rods crank studded mains and OEM MLS head gaskets. Will post head and top end configuration tomorrow when finished.

04/23/2019

Got the turbo LS Engine back from the machine shop today as well and in the block with AND using our preferred assembly l**e that sticks where you put it.

04/23/2019

The Nova engine crank just got back from balancing. Time to get her assembled here at

Dreams with enough believe in yourself become goals and enough effort those goals become reality. has been in the mak...
04/16/2019

Dreams with enough believe in yourself become goals and enough effort those goals become reality. has been in the making for well over a decade and I'm excited to see what the future holds with our move to Arizona coming up quick. I want to take a minute to thank everyone who has helped bring this childhood dream to reality. Its been an extremely humbling experience and look forward to what the future holds.
#1320

Address

Princeton, MN
55371

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+13202327655

Website

Alerts

Be the first to know and let us send you an email when Blockhead Racing Concepts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category