JMRacing

JMRacing Portland based Dyno Tuning & Wiring.

Freshly built Supra in for a custom engine harness paired with an EMU Pro 8. Proper wiring and electronics made the brea...
04/12/2026

Freshly built Supra in for a custom engine harness paired with an EMU Pro 8.

Proper wiring and electronics made the break-in tuning go smoothly. Always a good sign when everything works right out of the gate.

Looking forward to having it back on E85 and seeing what it puts down 🔥

Take your SR to the next level with our complete management package. Full details and purchase available at our website ...
04/04/2026

Take your SR to the next level with our complete management package.

Full details and purchase available at our website in bio

Installed & wired in some additional sensors before the flex tune on this S13. Swipe to see the graphs ->Stock internal ...
03/19/2026

Installed & wired in some additional sensors before the flex tune on this S13. Swipe to see the graphs ->

Stock internal SR20DET
Garrett 2871R
17psi Pump gas
19psi E60 Blend

03/11/2026

Beautifully done S13 putting down power on our Mainline 🔥

Built SR20DET
G25-550
E85

This was a fun one 🔥 motorsport-grade engine and chassis harness for an SR20 powered R32 Skyline. •ECUMaster EMU Pro 8•E...
02/16/2026

This was a fun one 🔥 motorsport-grade engine and chassis harness for an SR20 powered R32 Skyline.

•ECUMaster EMU Pro 8
•ECUMaster PMU-24DL
•Haltech UC-10

Concentric twisted tefzel wire loomed with Raychem DR25 and sealed with epoxied heat molded boots. Built for reliability under any conditions.

Engine loom for a fully built SR20 running an EMU PRO. We took full advantage of the ECU’s extensive I/O and designed a ...
01/19/2026

Engine loom for a fully built SR20 running an EMU PRO. We took full advantage of the ECU’s extensive I/O and designed a harness engineered for reliability, serviceability, and real-world abuse.

Purpose built, motorsport grade, and ready for anything.

DM/Email for your custom wiring harness needs!

01/14/2026

G80 M3 Comp laying down some power with a custom Flex Fuel tune 🔥

725whp S58 MHD+ Flex Fuel Custom Tune by  on our Mainline Prohub Dyno. Smooth, Strong, Repeatable. Book your session and...
01/09/2026

725whp S58 MHD+ Flex Fuel Custom Tune by on our Mainline Prohub Dyno.

Smooth, Strong, Repeatable. Book your session and level up your BMW

2JZ-GE VVTi swap harness for an EMU Black–equipped 4Runner heading out the door! Got a unique swap or ECU setup? Let us ...
01/08/2026

2JZ-GE VVTi swap harness for an EMU Black–equipped 4Runner heading out the door!

Got a unique swap or ECU setup? Let us handle the wiring so you can focus on enjoying the build. Modern electronics, old chassis, done right.

G80 M3 Competition MHD+ Flex Fuel custom calibration completed by The S58 platform demands more than an off-the-shelf ap...
01/03/2026

G80 M3 Competition MHD+ Flex Fuel custom calibration completed by

The S58 platform demands more than an off-the-shelf approach. Bend Calibration’s expertise paired with the precision of our Mainline Hub Dyno results in power you can trust from one of BMW’s most advanced M platforms.

No shortcuts. No generic maps.
The gold standard for S58 tuning.

📍 Portland, OR

2JZ GT86 Flex Fuel tuned on EMU Black V3. 🔥462whp 17psi 92oct / 601whp 23psi E85
12/29/2025

2JZ GT86 Flex Fuel tuned on EMU Black V3. 🔥

462whp 17psi 92oct / 601whp 23psi E85

Address

Portland, OR
97086-97299

Alerts

Be the first to know and let us send you an email when JMRacing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JMRacing:

Share