Blain Brothers Racing

Directions Website

Blain Brothers Racing Full Service Racecar Fabrication Shop and Parts Manufacturer/Supplier located in Port Huron, MI

We have had many people ask on a regular basis. So we came up with a couple different style brake line kits for cars or ...
11/02/2026

We have had many people ask on a regular basis. So we came up with a couple different style brake line kits for cars or trucks.

Stainless with 3an weld on tabs or bolt on tabs
Steel line with 3an weld on tabs or bolt on tabs

Or
Stainless line 3/16 flare with weld/ bolt on tabs
Steel line 3/16 flare with weld/ bolt on tabs

These kits can be bought directly off our site.

https://blainbrothersracingllc.com/shop/ols/products/complete-car-brake-line-kit

We offer an assortment of titanium parts on our website. 4 link bars welded or unwelded A arm kitsDriveshaft enclosure k...
11/01/2026

We offer an assortment of titanium parts on our website.

4 link bars welded or unwelded
A arm kits
Driveshaft enclosure kits
Wishbones
Front end mounting kits
Window frame mounting kits
Steering wheel extensions welded or unwelded
Parachute basket kits
Front suspension limiters
And if there is something else you need just message or email.

We also offer all components separately also including tubing.

https://blainbrothersracingllc.com/shop/ols/categories/titanium-parts?page=2&sortOption=descend_by_created_at

11/01/2026

Home of The World's Fastest Automatic Doorslammers!

Chromoly Front Travel Limiter Kits Limit front end travel for drag race applications. Install to lower control arm and b...
10/31/2026

Chromoly Front Travel Limiter Kits

Limit front end travel for drag race applications. Install to lower control arm and body to limit front control arm travel.

– Chromoly tubing and tube ends fully tig welded
– High strength Chromoly rod ends
– 3/8″ adjustments
– Quick pins
-Nickel Plated to prevent rusting and to give the limiters a nice clean look
-Short style Compressed length 10" fully extended 14.5" with heim joints all the way in on both ends. With heim joints out 1/2" it is 11" Compressed and 15.5" fully extended
-Long Style Compressed length 11.625" fully extended 17.5" with heim joints all the way in on both ends. With heim joints out 1/2" it is 12.625" Compressed and 18.5" fully extended

Optional
- 8- 1/8" tabs to weld to a arm and chassis
-All necessary Grade 8 3/8 bolts nuts and washers

https://blainbrothersracingllc.com/shop/ols/products/front-travel-limiter-kit-chromoly

10/30/2026

Got give a huge shout out the staff at TMP for working with all the series and be able to put out the 2027 series dates in OCTOBER!!!!!! yeaaaaaaaaa!!!!!

Mark your calendars, 2027 is going to be good!!!!

DIY Welding Trunk mounted vent tank These tanks are designed for cars running alcohol and forced induction. This tank ca...
10/29/2026

DIY Welding Trunk mounted vent tank

These tanks are designed for cars running alcohol and forced induction. This tank can hold up to 5 gallons. Tank is baffled to help prevent sloshing and blow by to exit the stack. Tank measures 10"w x11"L x10"T

Tank is offered with 3 options of inlets:
12an
16an
1-1/4 tube For 1-1/4" blow down hose

Tanks come with our billet mounts for 3/8 bolts for ease of welding and mounting or our 3/8 recessed weld on bungs

Tank comes with a 8 an fitting welded on the back. (Unwelded tank comes with a loose fitting to mount where it works best) so that you can cap it or you can plumb line to the outside of the car to drain it.

Stack is 2" diameter and 20"long That way it can be trimmed to fit out the trunk lid

Tank can be bought welded or Unwelded, Unwelded tank is tabbed for easy assembly

****** welded tank shown is not the same dimensions it was a custom tank done in house and shows the recessed weld in bungs for mounting*******

https://blainbrothersracingllc.com/shop/ols/products/large-trunk-mounted-ventpuke-tank

Parachute, Single Air Chute LauncherUse existing Chute, With BagDoes away with Pilot ChuteVery simple to pack chute, A t...
10/28/2026

Parachute, Single Air Chute Launcher
Use existing Chute, With Bag
Does away with Pilot Chute
Very simple to pack chute, A true one person job, Once you have used air launchers, You will NEVER use standard chute again.

Includes:
Launcher Cylinder
Chute pusher disc
Large backing plate
All fittings for single air launcher
10' DOT Approved Air Line
Toggle Valve (release pressure to retract rod for packing, Flip switch when packed)

Works great with White's Safety, Stroud or Simpson Chutes, With Bag.

Can be bought with optional billet recessed cylinder mount

Dual and single chute launchers in stock

https://blainbrothersracingllc.com/shop/ols/products/parachute-single-air-chute-launcher

Address

3763 Lapeer Road, Unit B
Port Huron, MI
48060

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Alerts

Be the first to know and let us send you an email when Blain Brothers Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby autos & automotive services