06/13/2022
Features
(2pcs/set) H11 Hi-Lo Beam LED headlight conversion kit
360 degrees adjustable beam pattern, no blind zone.
4 times brighter than halogen bulbs, with pure white 6000K color light. White light better reflects road paint and signs to show a clearer road situation during night driving.
Engineered beam pattern designed to throw more light on the road evenly at an appropriate angle without any foggy light.
Low beam angle with cut-off line, more precise beam pattern hot spot. Perfectly matches the halogen beam for a precise beam pattern and paralleled led light output. Do not dazzle oncoming traffic.
10 Minutes Easy Installation. 1:1 Design as your factory halogen lamp. Easy Plug & Play installation.
All-in-one aluminum profile heat conduction + high-speed mute fan (12000 rpm) to keep the light bulb within the appropriate working temperature.
Built-in constant current CPU, instant full brightness without start-up relay.
No more frequent replacements: 50,000hrs lifetime which translates to 20 years even if you drive for 6 hours at night every day.
CAN bus Ready for 98% Vehicles, some sensitive models of Ford, Jeep, Dodge, Ram, Volvo, Lexus, Chrysler, Mini and etc may require additional CAN bus decoder to be installed.
1 Year Manufacturer Guarantee.
Technical Specs
Plug Type: H11 Hi-Lo Beam
Power: 110W/set (55W/bulb)
LED Chips: Each bulb has 2pcs COB 1860 high power LED chips
Luminous Flux: 18000 lumens/set (9000 lm/bulb)
Operating Voltage: DC 10-30V (fit 12V, 24V vehicles)
Color Temperature: Pure White 6000K
Beam Angle: 360 degrees
Material: Aviation 6063 Aluminum profile
Operating Temperature: -40 to - +176°F
Packing included
2 x H11 LED headlight bulb
1 x Installation Manual (English)
About ThorBeam F2-1860 LED Headlight Bulbs
Super small size to ensure it fits in 100% of all factory headlight housing without needing to modify/ remove the factory dust cap. F2-1860 is one of the smallest LED lights in the market with a built-in cooling fan and on-wire CANbus and intelligent control driver, that fits in most vehicles without installation issues, and without needing to modify the housing nor the dust cover of the vehicle.
Lower power consumption, More lighting effect.
110W/set, 18000LM/set. 2pcs of COB 1860 chips to provide 400% more brightness on lower power consumption.
360-degree extreme beam pattern.
The CSP 1860 LED Chip is the same size as the fuse of the original halogen bulb. The chip placement is perfectly aligned to the fuse of the halogen bulb. The beam pattern is set correctly by default but it is free to adjust by rotating the back of the cooling fan. Solves the problem of uneven focus and dark spots. The condensed light output helps prevent blinding oncoming traffic, making you a safer citizen on the road.
Compact design, mini-size, easy installation, just plug and play.
The LED control driver uses high-quality electric parts and builds on the wire. Our headlight bulb features a built-in driver compared to other LEDs, which means fewer parts and a smaller driver. The smallest cooling system in the market, including a high-speed cooling fan and cooling aluminum sink. Only 0.5 inches in height and 1.37 inches in diameter! The F2 1860 model is designed to be as compact as it can be. Simple and easy to install, just take out the halogen bulbs from the housing, plug-in the led bulbs, and re-install the dust cover.
The smallest design, but more stable!
Our LED bulb with an all-aviation aluminum body, hydraulic fan, and built-in intelligent IC and temperature control system, perfectly solves the problem of light decay and dead lamp caused by the highest temperature of LED car light to ensure a longer lifespan.
Need CANbus decoder/ resistor?
Our F2 1860 LED bulbs can work well by themselves on most vehicles. If your LEDs start flickering or an error code appears on your vehicle, you will need one pair of decoders to cancel the error.
Application Tips:
If you don't see your vehicle in the compatibility tab, Google search “bulb replacement guide” and use the first link: “Bulb Replacement Guide- SYLVANIA Automotive” to find your vehicle’s make/ model/ year. If you still have questions, please contact us with your vehicle's make/model/year and other helpful information to check the bulb type.
Attention!
For Hyundai and Kia vehicles, if the bulb type is H11B, you will need to buy an H11B extension cable.
For Dodge, Jeep, Chrysler, and some German cars. If the light flickers or shows an error code after installing our LED bulbs, you will need a resistor/ decoder to solve the problem.
