Davenport Motors

Call Directions Website Contact the business

Davenport Motors 🚛 Located in Plymouth, NC – Your Trusted Source for Semi-Trucks, Dump Trucks, & Heavy Equipment! 💥 Call 252-809-2172 or browse www.davenportmotors.net 🚜

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 1999 International 2554 — Camel Jet Truck💰 $15...
10/13/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 1999 International 2554 — Camel Jet Truck
💰 $15,000
🆔 Stock #: DAV-070512

🔑 Key Features:
✅ 44,000 Miles
✅ DT466 Diesel Engine
✅ Super Products CJ1600 Jetter System
✅ Super Products D65-20SP Pump
✅ Air Brakes

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 This 1999 International 2554 Camel Jet Truck pairs the Super Products CJ1600 jetter system and D65-20SP pump with a DT466 diesel chassis showing 44,000 miles — a jet truck setup built for line-cleaning work, priced at $15,000 in Plymouth.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-070512&src=dealer_post

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 1989 MITSUBISHI FUSO — Rollback Tow Truck💰 $15...
10/12/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 1989 MITSUBISHI FUSO — Rollback Tow Truck
💰 $15,000
🆔 Stock #: DAV-042712

🔑 Key Features:
✅ 17' steel rollback bed
✅ Rear wheel lift + boom assembly behind the cab
✅ Cab-over chassis — tight turning, big visibility
✅ Diesel with manual transmission
✅ 559,077 miles

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 A rollback with a wheel lift and a boom gives you three ways to get a vehicle loaded. Old enough to be simple, equipped enough to earn. At $15,000, this is a working tow truck priced to go back to work.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-042712&src=dealer_post

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 1999 Kenworth T800 — Day Cab Tandem Tractor wi...
10/12/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 1999 Kenworth T800 — Day Cab Tandem Tractor with 2-Line Wet Kit
💰 $25,000
🆔 Stock #: DAV-102008

🔑 Key Features:
✅ CAT C12 12.0L inline 6-cylinder diesel engine
✅ 9-speed manual transmission
✅ 142,039 miles
✅ Tandem-axle chassis on air ride suspension
✅ 2-line aluminum wet kit for hydraulic trailers
✅ Inter-axle differential lock
✅ 3.90 axle ratio — 48,000 lb GVWR
✅ Day cab with fifth wheel — hook and haul today

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 Pre-emissions day cab tractor that is already set up to earn — the 2-line aluminum wet kit powers hydraulic trailers without a separate power unit, and the CAT C12 / 9-speed combo with an inter-axle lock gives it real work-tractor bite in soft loading spots. Day cab keeps the turning radius tight and the tare light for local and regional runs.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-102008&src=dealer_post

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 1988 Harley-Davidson Fltc — Tour Glide Classic...
10/11/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 1988 Harley-Davidson Fltc — Tour Glide Classic touring motorcycle
💰 $5,000
🆔 Stock #: DAV-091302

🔑 Key Features:
✅ 1988 Harley-Davidson Tour Glide Classic (FLTC)
✅ 1,340cc 2-cylinder V-Twin — 70 HP
✅ 44,027 miles
✅ Frame-mount fairing touring configuration
✅ Hard saddlebags + Tour-Pak with passenger backrest
✅ Engine guards

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 Touring riders know the FLTC: the fairing mounts to the frame, not the forks, so the bars stay light and the wind protection stays square to the wind at highway speed. Hard saddlebags, a Tour-Pak with passenger backrest, and engine guards make it a full two-up touring setup at $5,000.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-091302&src=dealer_post

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 2003 Mack CV (Granite) — Rear-Discharge Concre...
10/10/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 2003 Mack CV (Granite) — Rear-Discharge Concrete Mixer
💰 $40,000
🆔 Stock #: DAV-042701

🔑 Key Features:
✅ 12-liter 6-cylinder diesel engine with 235 HP
✅ Rear-discharge mixer body — drum empties out the back
✅ Tandem-axle chassis
✅ VIN 1M2AG03C23M001424

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 This 2003 Mack Granite is a straightforward rear-discharge mixer on a tandem-axle chassis — back up to the pour and work the chute from behind the drum. Come cold-start the 12-liter diesel, watch the drum turn both directions, and swing the chute through its full range before you buy.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-042701&src=dealer_post

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 2001 JLG 80HX — Telescopic Boom Lift💰 $16,500🆔...
10/09/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 2001 JLG 80HX — Telescopic Boom Lift
💰 $16,500
🆔 Stock #: DAV-031102

🔑 Key Features:
✅ 80 ft platform height, 86 ft working height
✅ 70 ft 7 in of horizontal outreach
✅ 500 lb unrestricted platform capacity — no derating as the boom extends
✅ 360° continuous swing
✅ 180° hydraulic platform rotator
✅ Diesel power

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 Need to reach high AND far in one setup? This 80HX puts an 86-foot working envelope over 70 feet of horizontal reach, with a full 500-pound unrestricted basket capacity — no dual-rating math when you're out over a setback. Diesel powered, swings a full 360 continuous, and the hydraulic rotator squares the platform to the work. Come look it over at the Plymouth lot.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-031102&src=dealer_post

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 2007 STERLING L8500 SERIES — Tandem Dump Truck...
10/08/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 2007 STERLING L8500 SERIES — Tandem Dump Truck
💰 $30,000
🆔 Stock #: DAV-042906

🔑 Key Features:
✅ CAT C9 8.8L — 335 HP
✅ Eaton Roadranger 10-speed manual
✅ 6x4 — 54,368 lb GVWR
✅ Ox Bodies steel dump body with tarp
✅ 457,289 miles / 19,543.7 engine hours

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 A proven Sterling tandem with the CAT C9 and a 10-speed Roadranger — the drivetrain combo that keeps working long after the payment book is closed. Ox Bodies steel bed with tarp, ready to haul.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-042906&src=dealer_post

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 JOHN DEERE 950 — Compact Utility Tractor💰 $8,5...
10/07/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 JOHN DEERE 950 — Compact Utility Tractor
💰 $8,500
🆔 Stock #: DAV-032401

🔑 Key Features:
✅ Yanmar 3T90-J, 1.7L 3-cylinder diesel engine
✅ 31 engine HP / 27 PTO HP
✅ 8 forward / 2 reverse gear transmission
✅ Only 1,285 hours
✅ Compact utility build — farm, land, and property work

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 Three cylinders of Yanmar diesel, just 1,285 hours, and a gear transmission built to be fixed with a wrench instead of a laptop. The 950 is the size tractor that handles the real daily chores — mowing, grading, feeding, hauling — without the bulk of a full-frame machine. At $8,500 it's a lot of working iron for the money.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-032401&src=dealer_post

📍 Davenport Motors / 3711 Mackeys Rd, Plymouth, NC 27962 / 📞 Call 252-809-2172🚛 2001 Kenworth T800 — Septic Pump Truck💰 ...
10/05/2026

📍 Davenport Motors / 3711 Mackeys Rd, Plymouth, NC 27962 / 📞 Call 252-809-2172

🚛 2001 Kenworth T800 — Septic Pump Truck
💰 $40,000
🆔 Stock #: DAV-102003

🔑 Key Features:
✅ CAT C12 12.0L inline-6 diesel — 410 HP
✅ Manual transmission, 6x4 tandem axle with inter-axle differential lock
✅ 2,300-gallon septic tank with midship pump
✅ 52,000 lb GVWR — built to haul heavy loads
✅ 312,292 indicated miles, 14,402.2 engine hours

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 A work-ready 2001 Kenworth T800 set up as a septic pump truck — tandem axle, 52,000-lb GVWR, and a 2,300-gallon tank with a midship pump. CAT C12 power with a manual box and inter-axle lock for the tough pulls. Priced at $40,000 and ready to go to work out of Plymouth.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-102003&src=dealer_post

💬 Financing and full inventory in the comments 👇

📍 Davenport Motors3711 Mackeys Rd, Plymouth, NC 27962📞 Call 252-809-2172🚛 2007 MACK GRANITE — Quint Axle Dump Truck💰 $60...
10/04/2026

📍 Davenport Motors
3711 Mackeys Rd, Plymouth, NC 27962
📞 Call 252-809-2172

🚛 2007 MACK GRANITE — Quint Axle Dump Truck
💰 $60,000
🆔 Stock #: DAV-1018

🔑 Key Features:
✅ Mack 12L 6-cylinder diesel — 335 HP
✅ Manual transmission — recently rebuilt
✅ 18 ft dump body — quint axle
✅ Aluminum wheels
✅ Newly installed A/C system
✅ Rebuilt title

📞 Call 252-809-2172 today for more information or to schedule a viewing!

📣 A quint-axle Granite that hauls serious weight — 18-foot body, Mack power, and a freshly rebuilt transmission with brand-new A/C. Ready to go straight to work.

🌐 Full listing & photos: https://hub.torquedma.com/vehicle.html?stock=DAV-1018&src=dealer_post

💬 Financing and full inventory in the comments 👇

Address

3711 Mackeys Road
Plymouth, NC
27962

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 2pm

Telephone

+12528092172

Website

Alerts

Be the first to know and let us send you an email when Davenport Motors posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Davenport Motors:

Shortcuts

Share

Category