Innovative Sound

Innovative Sound A gallery of my past and present work. Welcome to my page! Thanks!

Here you will find some pictures of the work I've done over the years and some links to write-ups of the builds I've completed. I’ve been in the car audio field for almost 20 years now doing everything from full custom audio builds to remote starts that can be started right from your phone. I’ve worked at several shops over the years learning what I know today, I've taken the time to get MECP cert

ified (Mobile Electronics Certified Professional) and I probably spend too much time researching new things to try and new ways to improve. I created this page to shed some light on who I am and what I love to do, so please look around and feel free to message me with any questions.

Simple 3D printed cable management. I designed 3 different sizes that all have mounting holes on the outsides for cleane...
06/30/2025

Simple 3D printed cable management. I designed 3 different sizes that all have mounting holes on the outsides for cleaner wire runs, and can be stacked or ran side by side. These were printed in a carbon ASA filament. Normal PETG can't withstand the temps inside a vehicle here during the summer as they start to warp or sag from the heat.

Custom bass k**b housing for the 5th gen Ram. Send me your housing and your bass k**b, and I'll do the rest 😎This does n...
05/05/2024

Custom bass k**b housing for the 5th gen Ram. Send me your housing and your bass k**b, and I'll do the rest 😎

This does not work with every k**b/board out there, so measurements or test fitment needs to be done prior.

**b

19+ Ram tweeter pods for a set of JL C7-100ct tweeters. 3D scanned, CAD drawn, 3D printed body, wrapped in matching vin...
03/29/2024

19+ Ram tweeter pods for a set of JL C7-100ct tweeters. 3D scanned, CAD drawn, 3D printed body, wrapped in matching vinyl, pressed mesh grille, and decorative acrylic accents that were laser cut and engraved. Includes mounting hardware and a template to line up on the pillar for easy mounting and drilling.

The mesh was pressed using 3D printed molds and the trim has been painted with a textured matte black for contrast, and includes a gloss black acrylic inlay.

Message me for a set of your own. Built around your tweeter of choice.

Tweeter pods built for a pair Morel Virtus Nano Carbon tweeters. This one was a little more challenging as I did not ha...
01/31/2024

Tweeter pods built for a pair Morel Virtus Nano Carbon tweeters. This one was a little more challenging as I did not have the tweeter to physically work with, however, I was able to get a 3D model to design with and print for this job.
The dome of this tweeter is taller than others I've done. An acrylic spacer and back plate were cut and mounted in order for the tweeter to sit comfortably without coming in contact with the mesh grille. And like the others, grille was pressed using 3D printed molds, trim piece was painted in a textured black, body is wrapped in OEM matching vinyl, and acrylic accents were added along with the engraved face.
While it was fun to work with an all 3D model for the most part, I still prefer to have the actual product to test with and measure from 😅.

Took a scan of the standard hood on the Ram 1500 using the Einstar 3D scanner. It's mainly for the emblems I make, but i...
07/31/2023

Took a scan of the standard hood on the Ram 1500 using the Einstar 3D scanner. It's mainly for the emblems I make, but if I ever find enough time, it'll be for a new 3D emblem... versus the flat acrylic ones I currently make.

Simple fuse holder cut from acrylic and heat formed. Mounted using the existing hardware.
07/30/2023

Simple fuse holder cut from acrylic and heat formed. Mounted using the existing hardware.

Another custom bass k**b finished. The client also requested a momentary switch be installed next to it. Everything is w...
03/23/2023

Another custom bass k**b finished. The client also requested a momentary switch be installed next to it. Everything is wired to a quick disconnect for easy removal/installation.

**b

3D scanned and printed tweeter pods that can be mounted by anyone. Includes a template to line up on the pillar for easy...
03/16/2023

3D scanned and printed tweeter pods that can be mounted by anyone. Includes a template to line up on the pillar for easy mounting and drilling. Mesh was pressed using 3D printed molds and the trim has a gloss black insert. The pods are held in place using x4 screws from the back of the pillar. Made for the 5th gen RAM.

Details of the Ram enclosure- Storage cubby, wrapped in 3 different materials, 3D printed lettering, acrylic insert, all...
03/12/2023

Details of the Ram enclosure- Storage cubby, wrapped in 3 different materials, 3D printed lettering, acrylic insert, all screws mounted with threaded inserts, and built for a shallow 10".

"Night Edition" 3D printed lettering. The backing was drawn out and cut on the laser, along with outline for the letters...
03/05/2023

"Night Edition" 3D printed lettering. The backing was drawn out and cut on the laser, along with outline for the letters and mounting holes. Once the panel was wrapped, the holes were cleaned out and hardware secures the letters from the backside.

Somehow, they always look the best before getting wrapped. Another Ram sub box in the works. ...
02/27/2023

Somehow, they always look the best before getting wrapped.

Another Ram sub box in the works.

Address

Phoenix, AZ
85351

Website

Alerts

Be the first to know and let us send you an email when Innovative Sound posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category