Mk1Lap 84

11/17/2025

Mk1Lap84 and its great, great grandson.

07/13/2025

10/22/2024

Something I’ve been planning for a while. Bolt in/removable rad support. Made the bar from frame horn to frame horn to mount the rad and oil cooler and tie it in (a little beefier than the stock sheet metal) Skinned the rad support so it’s basically just the sheet steel. All bolts in to the bar and fenders with a total of 8 nutserts. Can remove it with airdam still attached. Still need to do some more final welding to it but it’s close. Put the motor in today to start taking measurements.

04/07/2024

Since I pulled the stock tank and added the fuel cell I had to re position my fuel filter, fuel pump and the stock filter/pressure regulator. Also started to run the feed line to the front.

04/02/2024

Couple updates and upgrades I’m working on for this season. #

07/02/2023

Shaky, bad position iPhone video

06/23/2023

Runs, shifts,steers, stops 👍

06/18/2023

Little parking brake video

Short video of my routing and wiring on this Wilwood rear electronic parking brake by Tech-53. Dry fit and wired to make sure I did it correctly.

06/14/2023

Video explains it.

06/13/2023

Making the car much more luxury than last year.

06/11/2023

Fired right up today after having the motor out.

05/27/2023