918 Street Customz

10/08/2025

Rugged Radios Rambler G4 install on my OBS Chevy by using the factory CD player mounting bracket for a nice factory look!

10/02/2025

Cut and raised the exit area of the exhaust for more ground clearance, added FlowFX muffler, and a 3” x 5.5” oval tip.

05/03/2024

Installed a snorkel on the Gasquatch! (They don’t make a snorkel for an OBS Chevy but I’m making one from a Toyota 80 series fit) I’ve still got to heat the upward bend up and get it to hug the windows little closer but not a bad fit.

08/16/2021

Had a local auto body shop do the fiberglass on his helmet. Then I sanded and air brushed it to match close as I could then clear coated the helmet. Here’s how it came out!

05/02/2021

Cadillac Escalade that had Blown out rear air ride shocks I swapped over to non air ride and a heavier duty shock. Put a resistor on to bypass the air ride pump to not cause it to throw any error messages on the dash.

04/28/2021

New power steering pump and lines installed on a 5.7L vortec and plugs and wires installed on a 6.2L LS

01/30/2021

Lift shackles to bring the rear up level with the front of a 98 Tahoe. Before and after

01/25/2021

Custom made some roof rack traction board mounts and also installed a 52” curved light bar and some rock lights awhile back.

10/11/2020

4/7 drop on 2012 Silverado

05/02/2019

03/02/2019

Headliner I done today

12/22/2018

Air ride install I did about a month ago on my 83 Monte Carlo