CUNDN Racing

CUNDN Racing CUNDN Racing is your one stop performance shop!
(36)

We are a family owned and operated Mustang performance shop in Pearland, TX. We opened our doors to provide customers with honest, quality work. We specialize in Mustangs but have many customers with other makes/models. Whether you are looking for general maintenance, a full race build or something in between, we can help you. We too are car enthusiasts and have a passion for what we do, as you can see from the photo's we post our passion shows in our work.

New update on Lil 2v. Pulled 59lbs out of the car by doing bumper exit and hope to gain 30+rwhp, and now being able to a...
02/10/2020

New update on Lil 2v. Pulled 59lbs out of the car by doing bumper exit and hope to gain 30+rwhp, and now being able to add 8 more psi to her. 5.40's with radials on no prep is not to bad for all stock style suspension car, leaving soft, still on a stock Ford computer and Sct tuning to top it off. After this go around with the 4.6 2v, a coyote will take its new home in the engine bay or something bigger lol.

390 Ford BB Intake (Cast Stock). I don't deal with old school BB sh*t to much but dam this this is heavy. It's like pull...
02/08/2020

390 Ford BB Intake (Cast Stock). I don't deal with old school BB sh*t to much but dam this this is heavy. It's like pulling a whipple out of a Cobra. Yes I used the lift lolπŸ’ͺ

Fuel system Wednesday. Division X fuel system paired with twin 465 pumps so that we can run e85. Should boost up reliabi...
02/05/2020

Fuel system Wednesday. Division X fuel system paired with twin 465 pumps so that we can run e85. Should boost up reliability and power out if the still stock coyote engine.

95 mustang turbo install, but having problems controlling boost pressure. This 2nd waste gate should solve the problem o...
01/23/2020

95 mustang turbo install, but having problems controlling boost pressure. This 2nd waste gate should solve the problem of to much boost. Yes there is such a thing lol.

Sleeved coyote going back together, Oliver Rods,  Diamond Pistons ceramic coated with a Boss crank. Whipple will be the ...
01/19/2020

Sleeved coyote going back together, Oliver Rods, Diamond Pistons ceramic coated with a Boss crank. Whipple will be the choice of power after, then going through a Calimer stage 3 trans with a twin disk McCloud. Should be fun!

01/17/2020

2010 Ford F-150 - Custom Dyno Tune

New Year, New Parts! Get approved in minutes with Snap Finance for a no credit check instant funding for your next upgra...
01/17/2020

New Year, New Parts! Get approved in minutes with Snap Finance for a no credit check instant funding for your next upgrade! Up to $3,000 in financing with 90 days same as cash pay off option! Text info in picture below and be approved in minutes!

2v forged short block, stage 3 heads with a YSI Vortech going in today.
01/10/2020

2v forged short block, stage 3 heads with a YSI Vortech going in today.

Today at CUNDN Racing a record has been broken. Over 10 years of running our dyno we finally had a car break 1000rwhp on...
01/09/2020

Today at CUNDN Racing a record has been broken. Over 10 years of running our dyno we finally had a car break 1000rwhp on our mustang dyno. Even out of all the coyote cars that has been on it this has never been accomplished. It took a 55 chevy still powdered by a FORD to get it done #twisted55 #fordpower

Merry Christmas! May your day be filled with loved ones and blessings.
12/25/2019

Merry Christmas! May your day be filled with loved ones and blessings.

Pulled the x pipe off some 3" long tube headers today. I guess the 3" headers did not make enough back pressure so they ...
12/15/2019

Pulled the x pipe off some 3" long tube headers today. I guess the 3" headers did not make enough back pressure so they helped it out at the connection. Reminds me of another local shops work that comes through from time to time πŸ˜† #jobsecurity

12/15/2019

Little Friday action, last time this year.

Clean 1990 Fox in the shop for some General Maintenance and ECU Repairs!
12/03/2019

Clean 1990 Fox in the shop for some General Maintenance and ECU Repairs!

Before...
12/03/2019

Before...

Arthur brought his 1973 Mustang Mach 1 in to our shop with a loud knocking noise, upon inspection it seems as though the camshaft has failed. He chose to go ahead and refresh the engine, clean it up and breath some new life into his baby. Watch as we go through this 351C Engine Rebuild, we will show you before, during and after.

11/25/2019

First track outing in lil 2v. 17psi was all I could get out of the controller without changing spring or adding compressed air. It's looking like co2 is the next option for 25-30psi goal.

2003 mach 1 cam install with new timing and dyno tune.
11/22/2019

2003 mach 1 cam install with new timing and dyno tune.

Installing a fuel system in a AC Cobra along with a 3.73 gear. Also correcting coil over and disk brakes install by anot...
11/22/2019

Installing a fuel system in a AC Cobra along with a 3.73 gear. Also correcting coil over and disk brakes install by another shop.

Need a little extra help this holiday season? We offer no credit check financing with 90 days SAME AS CASH! Apply in min...
11/20/2019

Need a little extra help this holiday season? We offer no credit check financing with 90 days SAME AS CASH! Apply in minutes. Contact us for more info.

11/12/2019

SCT is now offering a Holiday Rebate! Get up to $50 back on your next SCT device purchase. Contact us for details.

11/11/2019
11/11/2019

πŸ‡ΊπŸ‡Έ Coming from a long line of Men who served our country dating as far back as the Civil War. Today is a day that we honor and remember those who serve and served. To all our customers who have served or are currently serving, THANK YOU! For without all the Men and Women who selflessly devote their lives to allow us to live how we choose we wouldn't be able to do what we love every day! If you or someone you know is serving or has served our country please post a photo and service info in the comments. πŸ‡ΊπŸ‡Έ

11/11/2019
This is my son Camron Nelson. He won two Southwest Jr Dragster Series championships this year as well as a NHRA Little m...
11/09/2019
D4 Spec Awards

This is my son Camron Nelson. He won two Southwest Jr Dragster Series championships this year as well as a NHRA Little money race and backed that up with a Division 4 NHRA Championship in the same weekend. I would like to see if everyone would team up with me and vote on him to be JDRL drive of the year. Thank you to all of my followers!

Please click the link to complete this form.

AC Cobra in the shop this week getting some β›½ fuel upgrades! Brand new aftermarket fuel system install, more photos soon...
11/04/2019

AC Cobra in the shop this week getting some β›½ fuel upgrades! Brand new aftermarket fuel system install, more photos soon!

1971 Chevelle Malibu Tremec 5 speed conversion with twin disk McLeod.
10/31/2019

1971 Chevelle Malibu Tremec 5 speed conversion with twin disk McLeod.

Had 30min to spare today so I Installed a spoiler on lil 2v today!
10/29/2019

Had 30min to spare today so I Installed a spoiler on lil 2v today!

Beautiful πŸ’ Chevelle in the shop getting an American Powertrain Tremec TKO600 transmission swap
10/28/2019

Beautiful πŸ’ Chevelle in the shop getting an American Powertrain Tremec TKO600 transmission swap

1989 Mustang- General Maintenance
10/24/2019

1989 Mustang- General Maintenance

2014 Mustang GT - Eibach Sportline Lowering Springs, BMR Suspension Adjustable Pan Hard Bar, BMR Suspension Lower Contro...
10/24/2019

2014 Mustang GT - Eibach Sportline Lowering Springs, BMR Suspension Adjustable Pan Hard Bar, BMR Suspension Lower Control Arm Brackets & Eibach Camber Bolts Installed

10/23/2019

1991 Mustang - CUNDN Racing Custom Dyno Tune

Looking for a specialist for your Fox Body? We specialize in Mustangs from 64-19 but there is still something about thos...
10/23/2019

Looking for a specialist for your Fox Body? We specialize in Mustangs from 64-19 but there is still something about those Foxes that hold a special place in our heart.

Data logging software....lol
10/23/2019

Data logging software....lol

10/19/2019

2000 Lightning Dyno Pull - Pulley Upgrade (12PSI), Boost Bypass Mod, EGR Delete and CUNDN Racing Custom Tune!

10/18/2019

347 Turbocharged Fox Body Dyno Pull on E85 with Megasquirt MS3 ECU. Shout out to Frank for getting to tune sorted out while we sorted out the mechanical bugs. She is a beast and ready to prove it!

My view for the last few days working on a couple fox bodies! One is just about ready to go home and the other is just a...
10/18/2019

My view for the last few days working on a couple fox bodies! One is just about ready to go home and the other is just about ready for some dyno time!

Did you know we offer Dyno rentals? Don't worry about traffic, police or anything else getting in the way! *Need a safe ...
10/18/2019

Did you know we offer Dyno rentals? Don't worry about traffic, police or anything else getting in the way!

*Need a safe place to complete logs for your remote tuner?

We can help you out! Your welcome to work directly with your remote tuner of choice and do all the data logs needed or you can drop your car off and we can handle it for you.

*Looking to tune your car yourself using an aftermarket ECU?

Get the one-on-one time you need to make sure your tune is perfect without the hassle!

Dyno rental is priced per hour! Contact us today for more info!

πŸ˜‚
10/18/2019

πŸ˜‚

In just 40 days your family will be gathered for Thanksgiving, is your car ready? Call us today to schedule your appoint...
10/18/2019

In just 40 days your family will be gathered for Thanksgiving, is your car ready? Call us today to schedule your appointment to make sure your car is the center of attention when you pull into the driveway!

Our website is currently experiencing issues. We are working to remedy the issue. In the meantime if you need pricing or...
10/18/2019

Our website is currently experiencing issues. We are working to remedy the issue. In the meantime if you need pricing or to place an order please contact us via phone @ 281-636-7142. Thank you for your patience!

We are looking for someone that wants to work at baytown this Sunday at Import face off helping hook up cars on the dyno...
10/16/2019

We are looking for someone that wants to work at baytown this Sunday at Import face off helping hook up cars on the dyno? They need to be able to climb under cars and hook up straps rather quickly. Someone will assist you as needed, one guy on one end another on the other end of the vehicle hooking and unhooking. 8am-4pm. We meet at our shop at 7am and head out together or you can drive your own vehicle. Free entry into track, lunch, drinks , 100.00 and you get to see some cars and girls lol. Thanks

1973 Mustang Mach 1 - Classic Auto Air A/C System Installed
09/20/2019

1973 Mustang Mach 1 - Classic Auto Air A/C System Installed

Little Jr action in the shop today
09/12/2019

Little Jr action in the shop today

09/10/2019

AC Cobra first start up. 347 stroker, vortech supercharger with a nasty cam.

Doing a little tuning on the twisted 55 for drag week.
09/06/2019

Doing a little tuning on the twisted 55 for drag week.

Tonight's adventure was Painting engine then tomorrow we will clear coat and untape. Hope to have it ready to drop in by...
07/11/2019

Tonight's adventure was Painting engine then tomorrow we will clear coat and untape. Hope to have it ready to drop in by friday, back into its home in an AC Cobra. More pict as we go.

Address

2555 Westgate Dr Suite C
Pearland, TX
77581

Opening Hours

Monday 09:00 - 18:00
Tuesday 09:00 - 18:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 18:00
Friday 09:00 - 18:00

Telephone

(281) 636-7142

Alerts

Be the first to know and let us send you an email when CUNDN Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CUNDN Racing:

Videos

Our Story

Nearby autos & automotive services


Other Automotive Parts & Accessories in Pearland

Show All

Comments

MERRY CHRISTMAS yall, have great holiday!!!
Representing !
Next project!
Shout out to CUNDN Racing,#UPRProducts and #Koni! My car no longer squats. Stays planted and rides better than new!
My boyfriend referred me to CUNDN Racing when my 2011 Honda Pilot needed its struts replaced. Cliff and Elizabeth provided a very reasonable estimate and during my Christmas holiday break, I had both the front and back struts installed. An issue developed almost immediately with the driver side strut and, after Cliff rode in the car with me, he agreed something was wrong. He ordered the necessary replacement parts and made the warranty repair. My Pilot drives like a new car! At all times, Cliff and Elizabeth were courteous and professional. I can highly recommend CUNDN Racing even if your race car is a Honda Pilot!
best people they r so friendly and i have the best tune in my 5.0 from them i really like what they did
65 falcon wagon 300-6 with paxton supercharger
65 ford falcon 300-6 with paxton supercharger