Jon Waterfield Motorsports

Jon Waterfield Motorsports Building and Customizing all kids of cars and trucks, Specializing in Frame, Suspension, and roll cage Fabrication. Also specializing in modernization

Jon Waterfield Motorsports is committed to doing only top quality work with function and future maintenance always in mind. After working in the Automotive maintenance Industry for 15+ years I learned the value of quality work and going the extra mile to ensure the job is complete and reliable. My goal is to complete your project with the most honest and competitively priced top quality work you can trust.

Finally found a set of rear fenders for my 38 truck - after finding a single rear fender for $900 I was thinking I was g...
02/26/2024

Finally found a set of rear fenders for my 38 truck - after finding a single rear fender for $900 I was thinking I was going to have to really spend some $$ to get one, and then I found a pair on Craigslist for $500 in AG- so I immediately jumped on them and picked them up Saturday for $450!! Now that last big peices I need are a hood and dash. I can't wait to finish this thing and get to enjoy it!!!





#1938



More pictures of 240sx drift car - the radiator is getting AN fittings welded on replacing the hose outlets before ever...
02/03/2024

More pictures of 240sx drift car - the radiator is getting AN fittings welded on replacing the hose outlets before everyone loses their minds

Did some cool tube and sheetmetal work on 240sx drift car- mounted the fuel cell above the differential, and rear mount...
02/03/2024

Did some cool tube and sheetmetal work on 240sx drift car- mounted the fuel cell above the differential, and rear mounted the radiator with a solid protection cage and simple bash bar/bumper- also did a complete firewall at the main cage hoop with some receses to allow the harness to wrap around the harness bar, and a removable panel to install the fuel cell through.










My shop truck is officially a roller on corvette suspension front and rear! Even still using the factory corvette leaf s...
12/11/2023

My shop truck is officially a roller on corvette suspension front and rear! Even still using the factory corvette leaf springs - the front will still come down once I get the engine and Trans mounted up next- I just threw a few sets of iron heads in the engine bay to slightly simulate a drive train, but with a few hundred more lbs it should be nice and low. Only one more of everything and it will be done in no time!











This morning I mocked up my 1938 chevy truck at the ride height I want to get some motivation and man it's gonna look sw...
11/25/2023

This morning I mocked up my 1938 chevy truck at the ride height I want to get some motivation and man it's gonna look sweet! So I completely stripped the body all apart and removed the stock suspension to make room for the new corvette C4 front and rear. Also used my new fenders to mark the front axle center line - hopefully with some determination it will be rolling by Sunday....


#1938
#19381/2tontruck








This foxbody was looking pretty rough when it came in, and now at least the engine bay and interior are in much better s...
11/08/2023

This foxbody was looking pretty rough when it came in, and now at least the engine bay and interior are in much better shape now! I striped the factory wiring harness all out and made up my own simple racecar harness for only the basics. I couldn't resist painting the engine compartment and cleaning up the engine itself - everything that leaves my shop has to be presentable and as clean as possible. Now that's its running and driving the owner can enjoy it while fixing up the outside next-










1580 miles later I have finally got my hands on a 37 chevy truck cab for my 1938 chassis I saved from the scrapper last ...
10/17/2023

1580 miles later I have finally got my hands on a 37 chevy truck cab for my 1938 chassis I saved from the scrapper last year. I found this cab up in Oakland, Oregon though Facebook groups and finally made the trip after zero luck finding anything closer for months. But it was worth the drive to see this thing looking like a truck again! Still needs everything, but now that I have a cab I can make it into a vehicle with all my hoarded engines and parts... bitchen shop truck coming up soon!!!






#1938



1965 F250 in for a complete Crown Vic swap utilizing the complete drive train and suspension from the 2011 donor Vic wit...
09/19/2023

1965 F250 in for a complete Crown Vic swap utilizing the complete drive train and suspension from the 2011 donor Vic with only 120k - got the original crossmember cut out and cleaned up the frame to weld in the new frame boxes, painted it and pressure washed the suspention and it's installed for good!




Some cars going though tech inspection on the salt
08/08/2023

Some cars going though tech inspection on the salt

Address

1511 Riverside Avenue #50
Paso Robles, CA
93446

Telephone

+18058358907

Website

Alerts

Be the first to know and let us send you an email when Jon Waterfield Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category