Genisis Fabrication and Raceworks.

Call Directions

Genisis Fabrication and Raceworks. Specific to Gen 3 LS.

Gen 4 DOD disable, 93 tunes, Economy tunes, carb tuning, weld and metal fab, audio, tint, wheel polish/wheel repair, General oem maintenance.

Jason Davis and i talked about getting our trucks ready for cruising. So on mine got the rear tires replaced and the sea...
09/18/2026

Jason Davis and i talked about getting our trucks ready for cruising.
So on mine got the rear tires replaced and the seal was leaking. Couldn't get the cross pin out.
So we worked on it for some time and found out in spun in a spider gear.. we were patient. He worked on it. I worked on it...... nothing....
Then f**k it I dont have time for this s**t. Cut the mf out and got rid of the trash G80.
Going back with a helical posi. Also going to be throwing in some 4.30s in time. This truck isnt scared of rpms.

09/11/2026

You all ready for CTC?
Who's going?
Where is everyone gathering?

Jason Davis being the luckiest mf i know. I never have this luck.
08/01/2026

Jason Davis being the luckiest mf i know. I never have this luck.

Got these panels close to what were looking for. Started on the inner panels to keep the fliw going inside the engine ba...
07/24/2026

Got these panels close to what were looking for. Started on the inner panels to keep the fliw going inside the engine bay. Little more and some twealing then ill stand back and look at it for an hour and change what we think is needed.

Cant see a damn thing with this black primer. 😒Jason Davis and I have been prepping for primer. Got some of the sheetmet...
07/22/2026

Cant see a damn thing with this black primer. 😒
Jason Davis and I have been prepping for primer. Got some of the sheetmetal in. We have an idea what we want but that s**t changes with me constantly. Playing arts and crafts with templates making if fit exact takes time. Most will be bolted in but it needs to be seamless as possible. Moving forward. 🤙🤙

07/15/2026

Jason Davis and I got the 4L75 in. Got the tune dialed in.. exhaust is coming next.

Started under the hood on John Ogden truck. Ready to make some real progress on this one. Keeping the flow throughout th...
07/15/2026

Started under the hood on John Ogden truck. Ready to make some real progress on this one. Keeping the flow throughout the truck. Subtlety wins.
With Jason Davis

Welded a b**g in Jason Davis trans pan. For the new transmission going in a bad bitch. Got John Ogden hood ready for pri...
07/11/2026

Welded a b**g in Jason Davis trans pan. For the new transmission going in a bad bitch.
Got John Ogden hood ready for prime and body work.

Getting the bed wrapped up. We also made a slot so it can be opened from the middle. Cool little touch once painted will...
06/20/2026

Getting the bed wrapped up. We also made a slot so it can be opened from the middle. Cool little touch once painted will blend into to the bed but also be a functional piece. Wanted to leave the inner metal on the door kind of a blank canvas so whatever paint scheme happens can be incorporated as mild or wild as the customer wants.

Jason Davis getting the inner fender tied in.. we wanted the solid look that will match our valence, but also unbolt so ...
06/20/2026

Jason Davis getting the inner fender tied in.. we wanted the solid look that will match our valence, but also unbolt so John Ogden can actually get the bumper off if ever needed. Trying to make things unbolt but look solid can be a mf. Once painted it will be good. Little tweaking and we will have this complete.

Address

3617 Eden Street Pascagoula Ms 39581
Pascagoula, MS
39567

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+12282810916

Website

Alerts

Be the first to know and let us send you an email when Genisis Fabrication and Raceworks. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category