Wahlers Competition Engines

Wahlers Competition Engines Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Wahlers Competition Engines, Automotive repair centre, 4652 Davis Crossing Road, Park Hills, MO.

Wahlers Competition engines , a builder of race and championship winning engines, a full service engine machine shop with race winning power and reliability in mind

05/05/2026

Attention to all of our customers, Tom is currently down for eye surgery. If anyone has any questions regarding work needing done, or to see how their job is going please call Justin at 573-944-4868. That way Tom can focus on recovering. Thank you for your patience.

There's just something about a freshly machined Cummins head! We just wrapped up this 6.7 Cummins cylinder head and this...
08/05/2025

There's just something about a freshly machined Cummins head! We just wrapped up this 6.7 Cummins cylinder head and this customer wanted all the seal and went with a HAISLEY MACHINE fire ring head gasket. Topped off with our competition valve job too! All the work was done IN HOUSE and is now ready to take all the world.

06/30/2025

The shop has a co. Wide vacation this week will be back in the shop July 7th. Everyone have a good Independence Day.

TWO of our Street Fighter Cummins long blocks finished up today. These monsters will make well over 1,000hp and run like...
03/05/2025

TWO of our Street Fighter Cummins long blocks finished up today. These monsters will make well over 1,000hp and run like a brand new engine. Our Street Fighter long blocks come standard with oversized MAHLE Motorsport North America pistons that are coated by our good friends at Mountain High Diesel Performance, Wagler Competition Products rods, Clevite H series bearings, ARP main studs, and all the quality machine work you'd expect from us. The cylinder head gets our tired and true port work, increasing the flow IN & OUT to over 225cfm, Inconel exhaust valves and intake valves, flame hoop grooves cut in both the block and head, and some quality ARP 625 head studs. We cant wait to see these things in action!

5.3 LS WEEKEND WARRIOR PACKAGE!!We've put together a stout 5.3 LS short block. Rated for 1100HP this thing comes standar...
02/26/2025

5.3 LS WEEKEND WARRIOR PACKAGE!!

We've put together a stout 5.3 LS short block. Rated for 1100HP this thing comes standard with a Forged 4340 crank, Callies Performance Products Compstar rods, Wiseco Automotive Red Zone Pistons for the rotating assembly, and is balanced in house on a CWT Balancer. ARP main studs, and King Racing bearings throughout. The block receives align honing mains, zero decking, and torque plate honing to size. All the rods and pin bores are checked and sized for proper clearances.

This particular block is an iron block, but can be done in an aluminum block. Lead times on a custom package or this exact package is 3-5 weeks. Priced at $5,995. This package can be finished out to a long block, or a complete engine.

*Package is based and priced off customer supplying the block*

ATTENTION!! We have some new policy changes that took effect at the beginning of the year. If everyone can take a minute...
01/15/2025

ATTENTION!! We have some new policy changes that took effect at the beginning of the year. If everyone can take a minute to look them over and keep them in mind. These changes needed to be made in order to keep supplying our customers with the best products and services. We look forward to the 2025 season with all our current and future customers!

We have some FelPro 1003 head gaskets in stock. Summit is selling them for $52.99 EACH and for the rest of the month we'...
01/14/2025

We have some FelPro 1003 head gaskets in stock. Summit is selling them for $52.99 EACH and for the rest of the month we're selling them for $42 EACH. Get 'em while there still available!

Finished a balance job up today for ANOTHER Cummins build we have going on. As you can see in the first spin the crank w...
01/13/2025

Finished a balance job up today for ANOTHER Cummins build we have going on. As you can see in the first spin the crank was in tolerance, but it wasn't good enough for us. Under 1Gram in the final spin. CWT INDUSTRIES making balance jobs great again! This build is getting a set of Wagler Competition Products Street Fighter Rods and our in house port work to the cylinder head.

All you drag race big block guys, we have a block that you need! Merlin 2 block, std deck height, bore is currently 4.52...
12/31/2024

All you drag race big block guys, we have a block that you need! Merlin 2 block, std deck height, bore is currently 4.525, bushed for .842 lifters, and has been oring'd on the deck. Great foundation for next season. $2,900 as the block sits. But if you are interested in a short block or full engine we have the parts here to finish it out.

Been putting in some work on this 5.9 Cummins head. Flowed it once we got it cleaned and steel shot to know where we sta...
12/27/2024

Been putting in some work on this 5.9 Cummins head. Flowed it once we got it cleaned and steel shot to know where we start. After our port work, valve job, and blending we gained over 60cfm on the exhaust and over 50cfm on the intake! BIG jump in air flow like this will really perk this diesel up and make an awesome street and pulling truck.

Address

4652 Davis Crossing Road
Park Hills, MO
63601

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+15735629086

Website

Alerts

Be the first to know and let us send you an email when Wahlers Competition Engines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category