Volcano Manifolds

06/16/2025

Huge Congrats Nick!

10/09/2023

08/30/2023

All our solenoids feature an integral through purge port to get all the air out of the nitrous and fuel solenoids and with less fittings than using a T before the solenoid.

06/05/2023

The years the easiest way I've found to a perfect intake manifold port match, thin film of RTV to "blank" gaskets on the intake side only. Torque it down, let it dry overnight. Then remove it to find the port indents in the blank gasket. Many times that's enough, but if they aren't clear enough, some high spot blue around the ports, bolt it down again and then remove it 5-10 minutes later, makes a perfect pattern to start port matching after you cut out the excess gasket.

06/05/2023

The engine is coming together nicely.

06/05/2023

05/12/2023

When we install heads here at Volcano Manifolds we typically do some minor port and combustion chamber blending and smoothing followed by hand lapping the valves to check for 100% contact and then checking valve spring installed height with an accurate original patented Mills "Hite Mike".

04/21/2023

The 502 ci (8.2L) big block chevy is getting a Lunati cam and an internal 58x DIS conversion kit which allows CnP coils and/or sequential injection with the accuracy of a crank trigger.

02/07/2023

We have Edelbrock ProFlo4 EFI in stock for AMC as well, ready to go with the Volcano System.

01/12/2023

The EFI big block burb is getting a set of Made in the USA Hedman stainless long tubes to let it breath!

11/22/2022

We offer Genuine Made in the USA Walbro/TI Automotive Fuel Pumps for installation into factory TBI or EFI sending units during EFI conversions or upgrades. The Suburban gets a 255 LPH in the TBI sending unit.

11/11/2022

The new MSD Ultra 6A CDI box going in the Suburban is less than half the size of the normal 6A.