AJC Mechanical LLC

08/30/2025

08/30/2025

Putting the finishing touches on this truck, had killustrate it come and lay down some hand painted pin striping, that's me driving it in her first video.

08/28/2025

Haven't posted anything in a while but this one is too nice not to share, started out as a clean 77k mile 83 k10 from north Carolina, stripped it completely down to a bare frame, fully built 1 ton drivetrain, dana 60 front 14 bolt rear th400 np205 and a 454 with edelbrock multiport fuel injection, this thing is beautiful, I plan on having it at some cruise nights in the next couple weeks.

06/20/2023

Just finished building this 1970dodge challenger R/T SE 440 4SPD for a customer, full restoration every nut and bolt, it was a nice 80k mile survivor before I started, 90% of this entire car is original 1970 equipment, going to at the Ludlow Elks cruise with it tonight come over and check it out.

10/04/2021

Pontiac 400 built for a 69 GTO, pretty stout street engine a little over 10:1 compression, Lunati voodoo cam, extensive head work, intake manifold port matched to the heads the exhaust side was port matched to a set of Hi po set of ram air manifolds.

06/29/2021

1969 GTO complete drive train build. Th350 Trans was in good shape when torn down, thoroughly cleaned and checked for any damage, all new bushings and thrust washers, hardened sprag, heavy duty clutches and steels, transgo shift kit, completely gone through front to back, built for a customers 69 GTO clone, I also built the engine and reared for the same car.

01/07/2021

This is an all original numbers matching low mile 70 1/2 Z28, about 12 years ago I built a stout small block for it so he could put the original engine away and drive and enjoy it. It was still running great but he wanted a little more horsepower so I freshened up the shortblock went a little bigger solid lifter cam upgraded the valve train and ported and port matched the heads and intake manifold. After i got it all back together he had me install electric exhaust cutouts (zoomies) ,The car is a Muncie m21 12 bolt 3.73 car. I spent a whole day driving this around when I was done wow this thing pulls and opening the zoomies and going through the gears is amazing, I did not want to give this car back.

01/17/2020

This is the falcon I built the engine and drive train for, once the body shop was done with body work and paint it came to me to build it, it was a completely empty tub when I got it, full fuel system, complete brake system, entire wiring and electrical system, full mechanical assembly, custom fabricated transmission crossmember for t-5, exhaust with x-pipe, got everything working and engine tuned, this car left as a running driving stopping functioning car.

01/17/2020

This is a Ford 302 roller cam engine I built for a Ford falcon, mild build, I also built the transmission and rear for this car check out pictures of those in earlier posts.

01/17/2020

66 nova from scratch update, back half of the car coming together.