BLR Race Engine's

05/05/2026

Got all the linkages mocked up. Changed jets and air bleeds(using math)for the Carbs. I pulled the heads and port matched them to the tunnel ram. Only thing left is to remove the mechanical fuel pump( blank off the hole)and install an electric pump and wiring on the test stand. Should be fired up over the weekend. This is an untested( by me at least) set up I've installed on my motor just to see if I can make it work. Happy Tuesday All!! Be Safe!! B

05/02/2026

05/02/2026

I mocked up the sidesaddle linkage set up. Just got the ported phenolic 2-inch spacers. Going to post some videos soon. Been SWAMPED! Getting there. I'm going to tune the carbs,recurve the distributer. Stay tuned!! B

04/09/2026

Good One.

04/09/2026

Lol

01/17/2026

Got started with the Impala!!

01/16/2026

Yep. Worked with him!!

12/04/2025

Update: I poured transmission fluid down the carb before towing. Let it sit four days after rotating the motor. Pulled and cleaned the plugs. I ran a compression test. 125 on 6 cyl. And two were only 60 . Put an HEI distributor and wires that were laying around in it. Put a carb on it. Put the same plugs in it.Used a makeshift fuel tank( coffee can) hooked up an electric fuel pump and a starter button ( no keys ) I pushed the button, IT FIRED RIGHT UP!! Idles smooth.WOW!! Videos coming soon.