20Hz Labs

02/06/2022

07/27/2021

Not sure how long access to the page will last, and it's a flipping miracle that I am able to do this now, but if you have sent this page a message, just know that I know there have been messages, I just can't read them. At all.
What can I say, it's Facebook. They seem to do what they want, when they want to whom they want.

Yes. Sadly, the bassk**bs have been removed from the inventory for the time being because of the potentiometer quality issue with the supposed 'high end pro audio' pieces that were sourced from a Japanese company that used to make high end expensive head units with the greenish clear buttons. /////Ahem. Anyway.

For any other products or inquiries, hit up the website and send a message that way. Unlike this silly platform, It still works.

07/11/2020

Update: finally feeling better after being under the weather for a bit. While it thankfully was NOT covid related, it was rough.
Those who contacted me personally wishing me well, thank you.
Now, back to fab work!

07/04/2020

While cutting more acrylic, I grabbed an offcut and though - "I wonder..."
Five minutes total from designing the job to the machine beeping that it was done and this is the very roughed in result.
This made me wonder - do you prefer a textured or a smooth k**b? Do you use just your thumb, or do you use your index finger and thumb to spin the k**b?

Once I get time to work on it and polish the design I might offer this as an option versus the knurled aluminum k**bs with the set screw that come with them now.

06/30/2020

Narrowing down on the wait list. I've been so busy that I forgot to put some of the photos of the Wolfram Audio k**bs up. So here we go. Artic wolf themed and Natural color.
Thanks to Colin Buckeye and Lorenzo Thf Lewis for the photos.

06/27/2020

Recently received an email saying the rectangular boxes are industry standard and the products I create were out of place.
Well, it's simple - if you don't like the stack fab look and appreciate the level of effort and detail that goes into each one of our products, that's your right and you are certainly welcome to it.
Can we do the typical acrylic box? Yes.
Will we do the typical acrylic box? No.
At least not this week.

06/26/2020

Working full tilt to get orders out the door. We used to cut everything on the cnc routers. Had to buy a new toy for the lab just to keep up with the incoming orders. Now it smells like a cross between a woodshop, metalshop, and the local mall acrylic nail salon. Oh well, two out of three isn't bad.
Everything is still 100% hand finished though. Always has been, always will be.

06/20/2020

If a piece doesn't pass all the tests before packaging, it's scrapped.

This one had a channel go bad/out of spec somewhere along fabrication. It failed the final electrical resistance check.
It finally broke after running it over TWICE with a 6000+ lb f150 supercrew truck.

Just fyi, we don't cover things like this.

06/19/2020

Last of the paid orders going out today and tomorrow, so be on the lookout for tracking numbers.
For those on the wait list, yours are being built and I'll be contacting you soon.

I want to take a moment and express my heartfelt gratitude and appreciation to everyone. 17-19 hour days for the past week straight have been the norm and while tiring, it is extremely satisfying.

So to each and every one of you - I sincerely thank you. Have a great weekend!!

06/16/2020

Bassk**b clearcoats went on yesterday and it was immediately apparent that there was a contaminant in it. Production halted and methodical cleaning began. The clearcoat process was repeated this morning with the cleanliness of a surgical room. 100% success. The way it normally is.
I can apologise for the delay this caused, but I can't and won't have a sub-par product go out. You work too hard for your money to accept anything less.

06/11/2020

Guys n gals, working as fast as we can to get the Wolfram branded k**bs fabricated and back in stock. Hang in there please. I wasn't expecting the sudden influx of custom Wolfram orders.
Thank you for your understanding and I will keep everyone updated here.
Mike @ 20Hz Labs.

PS - it may help to understand that these are hand assembled and we cnc everything in house from the Baltic Birch, acrylic halos, PC boards, etc..
If you have any questions, feel free to send me a message directly and I will address them.

06/10/2020

Customer commissioned an in-dash k**b to plug straight into his head unit and mount in a trim panel on the dash.
Simple but elegant and built like a tank.
We don't normally do these types of requests, but once in a while, changing things up is good.