BTuned Performance

Call Directions Website Contact the business

BTuned Performance Specializing in Nissan/Infiniti & BMW Tuning. Ecutek Master Tuner, HPTuner, MHD & Uprev Dealer. Parts, Installs, Tuning & fabrication & 2WD Dynojet.

Preventative maintenance and needed service, we got you covered! A huge thing our clients love about us is that while we...
10/05/2026

Preventative maintenance and needed service, we got you covered! A huge thing our clients love about us is that while we are doing the work/upgrades you had in mind, we check over to make sure we catch anything before it happens and tackle it while we are in the area. Sometimes we have to order upgraded parts if there’s something like a special color hose you want, but we stock a variety of parts to keep your wait time down.
While doing gallery gasket & water pump job on the G37 we found a few concerns with the coolant hoses showing signs of needing to be changed. We also took care of the pesky heater core hose barb with a metal upgrade to make sure he doesn’t get stranded!
While we’re on the coolant topic, this Q50 has upgraded hoses already, though we can only assume someone was a little rough when they installed them and cracked the radiator neck without knowing.
We got the client a new radiator, installed it properly and finished up with a dyno tune and TCM tune on his VR30 trans swapped 3.7.
••••

10/04/2026

Using our nitrousexpress fill station we are your local Nitrous fill location! From 1 pound bike bottles, standard 10lb or the big 20lb bottles, we got you covered! For $9.95/per pound, message us to refill your adrenaline, NOS, nitrous(whatever you fancy to call it) bottles.
We also offer Nitrous Express kits, installation and tuning!
••••
We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house!
•••••
Message us on any of our social media accounts
📲or💬 407.334.3419
📧[email protected]

This G35 sedan came in to find a new local mechanic he could trust and for an inspection to keep his original engine and...
10/03/2026

This G35 sedan came in to find a new local mechanic he could trust and for an inspection to keep his original engine and trans G running that much longer.
We did find a couple concerns but nothing major to stop them from driving it. We performed an oil change and let the customer know what was wrong and provided them with a quote.

On the other side of the spectrum, this 03 350z has to be one of the cleanest examples of a daily driven stock DE. We performed a trans and diff fluid service as the customer was unsure when it was ever done before, does a lot of high way driving and wanted to make sure it was healthy as he reaches closer to 100k miles.

We are your trusted mechanic and performance shop for all of your vehicles while being Nissan/Infiniti specialists!
••••
We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house!
•••••
Message us on any of our social media accounts
📲or💬 407.334.3419
📧[email protected]

Custom AC lines finished up on this VR30 swapped 350z with 100% hold and no leaks 🥵This 7AT VR30 swap has been a gift th...
10/02/2026

Custom AC lines finished up on this VR30 swapped 350z with 100% hold and no leaks 🥵
This 7AT VR30 swap has been a gift that just keeps on giving but we appreciate the support and trust from Dean to get it done. We have a few more things to wire for the AC and with a little magic from Chris Scott we should get the AC finished and car ready for final delivery.

If this was a race car and not a daily driving 7AT, electric power steering, factory AC and Air to air kit, this swap is easily 5 times easier 😂.
••••
We have the tools and knowledge to get your G/Z/Q/GTR where you want it to be with parts, fabrication, installs and tuning all done in house!
•••••
Message us on any of our social media accounts
📲or💬 407.334.3419
📧[email protected]

+115WHP & +162WTQ on this 3.0 with 2 power adders and 1 cooling mod.That’s right, this car still has stock cats!AMS 80mm...
09/24/2026

+115WHP & +162WTQ on this 3.0 with 2 power adders and 1 cooling mod.
That’s right, this car still has stock cats!
AMS 80mm intakes
Heat exchanger
2.5 inch catback exhaust
⛽️93 Octane
📈425WHP & 471WTQ🦍

Transform your VR powered Q50/60 or Z with our custom calibration using EcuTek Technologies Ltd

Q50 3.7 came in for the werks. With ISR Longtube headers and off brand catback this Q needing some breathing mods. We di...
09/23/2026

Q50 3.7 came in for the werks. With ISR Longtube headers and off brand catback this Q needing some breathing mods. We did our 3 inch intakes, Z1 Ported upper plenum and delivered a very strong power band on this 3.7 using EcuTek Technologies Ltd software.
Making over 300whp from 6000RPM and 272wtq down low on 93 octane this isn’t your average 3.7!
We did install upgraded injectors as well and planned to do runs on E85, but unfortunately the car was hit pretty bad 😭
⛽️93 Octane
📈334WHP & 272WTQ🦍

Q60 came in for our Flex fuel kit and EcuTek Technologies Ltd Flex calibration Z1 Intakes & catted FDPBoosted6 Heat exch...
09/22/2026

Q60 came in for our Flex fuel kit and EcuTek Technologies Ltd Flex calibration
Z1 Intakes & catted FDP
Boosted6 Heat exchanger
MBRP Catback
BTP CAN Flex fuel kit(Standard kit w/Filter)

⛽️93 Octane
📈447WHP & 515WTQ🦍

🌽E30
📈482WHP & 553WTQ🦍

VR30 Q50 with VRX70s 🔥This Q50 has been coming to us for some time now and SpeedDemon decided it was time for the next s...
09/21/2026

VR30 Q50 with VRX70s 🔥
This Q50 has been coming to us for some time now and SpeedDemon decided it was time for the next stage in his journey. We installed the VRX70s, High pressure fuel pump, AMS Stage 2 injectors, Fuel pressure sensor, 80mm intakes and NonStopTuning pulley kit. Our fabricator got to work welding flanged for BOV on the AMS Intercoolers and our full 3 inch downpipes with 12 inch resonators. While he thought it had an upgraded Low pressure fuel pump, we quickly found out it did not! Maxing out the stock low pressure side at a little over 600whp on E65, we quickly got to work on the ultimate single pump stock housing upgrade.
After performing our BTP Hi-Flow LPFP upgrade with billet top hat, Holley hydramat and PRIDE extended pickup to prevent fuel cuts and walbro 485 paired with a relay kit. Just like that another 700+WHP Q on the road.
⛽️93 Octane
📈532WHP & 482WTQ🦍

🌽E65+
📈723WHP & 576WTQ🦍

Not all shops are equal and you can trust us to get it right for you! We are Nissan/Infiniti specialist but we work on m...
09/21/2026

Not all shops are equal and you can trust us to get it right for you! We are Nissan/Infiniti specialist but we work on many other makes/Models as well. We can perform regular maintenance and repairs on just about anything and even major repairs from engine and transmission replacements. We apply the same precision and car to everything we work on!
Doing valve covers on a 3.7 that were apparently done before, we found them to be done incorrectly and would explain not only the leak, but concerns the client had about its operation. Luckily we were able to replace the coil pack with a good used one we had in stock and finish the job the right way, the first time.

After doing our full gallery gasket & water pump service we pressure test the cooling system and right away we saw a concern. Upon further investigation we found a leaking coolant hose for the Throttle body and at the outlet for that circuit. We performed a throttle body coolant delete bypassing this system with a new hose and clamps. Overall performance increase though small and solving the problem.

VR30 owners note the debris we found when changing out the solenoid and installing a Pride solenoid delete plate, keeping the system in high pressure mode.
The debris could have ultimately clogged the solenoid leaving it in a low pressure demand state and causing failure to this engine.

Not all shops are equal and you can trust us to get it right for you! We are Nissan/Infiniti specialist but we work on m...
09/17/2026

Not all shops are equal and you can trust us to get it right for you! We are Nissan/Infiniti specialist but we work on many other makes/Models as well. We can perform regular maintenance and repairs on just about anything and even major repairs from engine to transmission replacements. We apply the same precision and care to everything we work on.
••••
We have the tools and knowledge to get you where you want it to be with parts, installs, fabrication and tuning all done in house!
•••••
Message us on any of our social media accounts
📲or💬 407.334.3419
📧[email protected]

Address

1010 Bunnell Road Suite 1103
Orlando, FL
32714

Opening Hours

Monday 10am - 6pm
Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Friday 10am - 6pm

Telephone

+14073343419

Website

Alerts

Be the first to know and let us send you an email when BTuned Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to BTuned Performance:

Shortcuts

Sponsored

Share