Thermal Tech, Inc. - Orlando - Place

Thermal Tech, Inc. - Orlando - Place BOILERS AND BOILER ROOM EQUIPMENT (SALES - SERVICE - RENTALS) HEAT TRANSFER SOLUTIONS Thermal Tech, Inc. has been active in boiler sales, service, parts, support equipment and rentals for over 35 years on Central Florida.

With headquarters in Orlando, FL and a fully staffed branch location in Tampa, FL we are ready to assist you with your boiler room needs. We are dedicated to prompt, professional and ethical response to customer needs. Representing the leading manufacturers in the he industry, coupled with years of experience assures our customers that we will provide sound advice and reliable service. Specialties

With headquarters in Orlando, FL and a fully staffed branch location in Tampa, FL we are ready to assist you with your boiler room needs. We are dedicated to prompt, professional and ethical response to customer needs. Representing the leading manufacturers in the he industry, coupled with years of experience assures our customers that we will provide sound advice and reliable service. Specialties

Operating as usual

Boiler Efficiency Application Training
05/12/2018
Boiler Efficiency Application Training

Boiler Efficiency Application Training

Thermal Tech, Inc. is proud to sponsor the Reed Institute Boiler Efficiency Application Training. Joe Stagg with Pipeline Development Company will be the instructor bringing a wealth of HVAC technology experience to the training.

Boiler Efficiency Application Training
05/10/2018
Boiler Efficiency Application Training

Boiler Efficiency Application Training

Thermal Tech, Inc. is proud to sponsor the Reed Institute Boiler Efficiency Application Training. Joe Stagg with Pipeline Development Company will be the instructor bringing a wealth of HVAC technology experience to the training.

Boiler Efficiency Application Training
05/03/2018
Boiler Efficiency Application Training

Boiler Efficiency Application Training

Thermal Tech, Inc. is proud to sponsor the Reed Institute Boiler Efficiency Application Training. Joe Stagg with Pipeline Development Company will be the instructor bringing a wealth of HVAC technology experience to the training.

Boiler Efficiency Application Training
04/24/2018
Boiler Efficiency Application Training

Boiler Efficiency Application Training

Thermal Tech, Inc. is proud to sponsor the Reed Institute Boiler Efficiency Application Training. Joe Stagg with Pipeline Development Company will be the instructor bringing a wealth of HVAC technology experience to the training.

Boiler Efficiency Application Training
04/21/2018
Boiler Efficiency Application Training

Boiler Efficiency Application Training

Thermal Tech, Inc. is proud to sponsor the Reed Institute Boiler Efficiency Application Training. Joe Stagg with Pipeline Development Company will be the instructor bringing a wealth of HVAC technology experience to the training.

Boiler Efficiency Application Training
04/18/2018
Boiler Efficiency Application Training

Boiler Efficiency Application Training

Thermal Tech, Inc. is proud to sponsor the Reed Institute Boiler Efficiency Application Training. Joe Stagg with Pipeline Development Company will be the instructor bringing a wealth of HVAC technology experience to the training.

After 15 years of providing low costs and high efficiencies with the environmentally conscious KN-Series cast iron conde...
12/07/2017
ATH Cast Iron to the Core

After 15 years of providing low costs and high efficiencies with the environmentally conscious KN-Series cast iron condensing boilers, Advanced Thermal Hydronics recently assembled a case study of these durable and efficient cast-iron boilers.

This study highlights engineering and design of the model along with the comparison of fully operational units with their observations and findings.

Click below to access the report conclusions to find out why cast iron is an ideal material for condensing boiler applications.

One consideration for replacing a coil is when the transfer of heat is reduced due to air or fluid side fouling or plugg...
11/02/2017
Thermal Tech, Inc. (Corporate Page)

One consideration for replacing a coil is when the transfer of heat is reduced due to air or fluid side fouling or plugging. These problems are caused by foreign material in the air stream or dirt in the fluid system.

Read about further causes and solutions in this in depth article by USA Coil & Air then contact your local Thermal Tech, Inc. representative for your customized replacement solution.

We are "Helping the Customer Remove the Worry."

When Is It Time To Finally Replace A Coil? http://conta.cc/2zd5Wiy

Cleaver-Brooks | Reference Center | Boiler Basics | Number of Boilers
10/25/2017
Cleaver-Brooks | Reference Center | Boiler Basics | Number of Boilers

Cleaver-Brooks | Reference Center | Boiler Basics | Number of Boilers

When selecting the boiler(s), consideration should be given to backup equipment to accommodate future expansion, emergency repairs, and maintenance. There are a number of considerations for a backup boiler: Type of Load, Downtime, Boiler Turndown, Modular and Hybrid Solutions.

Thermal Tech, Inc. - Tampa (Place)
10/12/2017

Thermal Tech, Inc. - Tampa (Place)

Joins us for this month's Cleaver-Brooks webinar to learn how to improve the efficiency, reliability, and safety of your facility. The content will cover boiler-related factors that impact each of these three areas as well as detail and prioritize change-related implementation tactics. http://bit.ly/TTICBOct17

Reminder: Stop by our Booth for the Latest Energy Efficient Boiler Technology at the CFHLA Tradeshow
08/16/2017
conta.cc

Reminder: Stop by our Booth for the Latest Energy Efficient Boiler Technology at the CFHLA Tradeshow

Cleaver-Brooks
07/31/2017
Cleaver-Brooks

Cleaver-Brooks

New product announcement! The all new ClearFire®-CE (CFC-E) is a compact, high-mass, fully condensing hydronic boiler that achieves high efficiency and low emissions. Get all the information you need here: http://bit.ly/2oUaBOr

Starts Today - 2017 Annual Summer Parts Sale - Don't miss out on up to 20% savings!
06/01/2017
Starts Today - 2017 Annual Summer Parts Sale

Starts Today - 2017 Annual Summer Parts Sale - Don't miss out on up to 20% savings!

Starts Today - 2017 Annual Summer Parts Sale - Don't miss out on up to 20% savings!

Address

5141 Forsyth Commerce Rd, Unit 1
Orlando, FL
32807

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

(407) 373-0042

Products

Representing: Cleaver-Brooks, RBI, Advanced Thermal Hydronics, & Sussman boilers.

Accessories: Wilo Pumps, Spirotherm, ThermaFlo, EMCO / Spirax Sarco, Shipco Pumps, Hays Cleveland, Honeywell, Mueller, Alyan Pump Co., Federal Pumps, USA Coil & Air

Alerts

Be the first to know and let us send you an email when Thermal Tech, Inc. - Orlando - Place posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thermal Tech, Inc. - Orlando - Place:

Nearby autos & automotive services


Other Automotive repair in Orlando

Show All

Comments

Getting started with giving the facility a little freshing up with a new coat of paint after 11 years. Got to keep looking good to provide good service to our customers.