Cycle Pro

Cycle Pro Come and visit our fully equipped workshop, where a warm welcome awaits you. Staffed by helpful, certified, and knowledgeable techs that are here for your every motorcycle need.

We also have a small accessory shop. www.thecyclepro.com Cycle Pro is a motorcycle and ATV shop. Repair. Service. Parts and Accessories. U.S.A. distributor of Dimsport Rapid Bike Products and distributor of Arrow Exhaust Systems Italy. Our goal is to provide exceptional, high-quality and honest service. We work on Japanese, American and European makes and models. Our services include all basic and

We also have a small accessory shop. www.thecyclepro.com Cycle Pro is a motorcycle and ATV shop. Repair. Service. Parts and Accessories. U.S.A. distributor of Dimsport Rapid Bike Products and distributor of Arrow Exhaust Systems Italy. Our goal is to provide exceptional, high-quality and honest service. We work on Japanese, American and European makes and models. Our services include all basic and

Operating as usual

Customer: I release the clutch, something spins but the bike does not move . Something is wrong with transmission.  Us: ...
11/12/2021

Customer: I release the clutch, something spins but the bike does not move . Something is wrong with transmission.

Us: No bud you wore the f out of your sprockets :) πŸ˜€

11/11/2021
It is a Panigale....   we might as well secure the sprocket bolt right ? πŸ˜€
11/02/2021

It is a Panigale.... we might as well secure the sprocket bolt right ? πŸ˜€

It is a Panigale.... we might as well secure the sprocket bolt right ? πŸ˜€

Chain and sprockets job is always a fun job on any Panigale ;)
11/02/2021

Chain and sprockets job is always a fun job on any Panigale ;)

Same carb I posted the other day, it is already looking much better, fresh off the ultrasonic cleaner
10/21/2021

Same carb I posted the other day, it is already looking much better, fresh off the ultrasonic cleaner

They said the bike ran fine a few months ago and asked if we were sure about the carbs needing work ;) Enjoy !
10/20/2021

They said the bike ran fine a few months ago and asked if we were sure about the carbs needing work ;) Enjoy !

Could not resist, if this isn't a bad ass wheel , what is ?
10/05/2021

Could not resist, if this isn't a bad ass wheel , what is ?

09/17/2021

A memorial service to celebrate the life of Hector Rivera on 09/18/2021, Saturday between 2pm-4pm at 8160 Rogers Pl. Orlando, FL 32827.

09/08/2021

It is with great sadness that we inform you, our friend and also Cycle Pro technician, Hector Rivera passed away last night. Our deepest condolences go to his family and friends. Hector started working with us at the beginning of 2015. He was a great man and an amazing technician we have ever had the pleasure of working with. We will miss him [email protected] Turan Dennis New

09/04/2021

Another one, I took it in slower spin, for the record

09/04/2021

This bike was handed back to the customer with missing axle spacer by another mechanic. Now we now why. Would you agree the discs are "slightly" warped ? When the wheel was installed back with proper spacers, it hardly spin with a lot of force. #ilovemyjob

#k1600gtl , we love these bikes around here and the best part of the job is the test ride making sure these babies are r...
09/02/2021

#k1600gtl , we love these bikes around here and the best part of the job is the test ride making sure these babies are ready for another cross country ride #BMWMotorrad #bmwmotorcycle πŸ‡©πŸ‡ͺ

#k1600gtl , we love these bikes around here and the best part of the job is the test ride making sure these babies are ready for another cross country ride #BMWMotorrad #bmwmotorcycle πŸ‡©πŸ‡ͺ

08/31/2021

This is the actual photo of the 13 Service Members killed in Kabul Afghanistan.

13 Heroes - 13 Flags - 13 Reasons To Pray Tonight

REMEMBER THEIR NAMES :
HN MAX SOVIAK
SGT NICOLE GEE
CPL DAEGAN WILLIAM PAGE
LCPL DAVID LEE ESPINOZA
LCPL RYLEE MCCOLUM
LCPL DYLAN MEROLA
CPL HUMBERLO SANCHEZ
LCPL KAREEM NIKOUI
LCPL JARED SCHMITZ
CPL HUNTER LOPEZ
SSGT TAYLOR HOOVER
SGT JOHANNY ROSARIO
SSGT RYAN KNAUSS

MAY WE NEVER FORGET THEY PAID THE ULTIMATE SACRIFICE
Let this spread the internet.

πŸ“Έ: Landon Workman

Credit: Proud Police Wife

07/19/2021

A customer asked me how much it cost to do this job....
I answered him: $ 1500
He said: So expensive for this job?
I asked: How much do you think it would cost you?
He answers me: $ 800 maximum... That's a pretty simple job right? !"
- For $ 800 I invite you to do it yourself.
- But.... I don't know how to.
- For $800 I'll teach you how to. So besides saving you $700, you'll get the knowledge for the next time you want
- It seemed right to him and he agreed.
- But to get started: you need tools: A welder, grinder, chop saw, drill press, welding hood, gloves etc...
- But I don't have all these equipment and I can't buy all of these for one job.
- Well then for another $300 more I'll rent my stuff to you so you can do it.
- Okay, he says.
- Okay! Tuesday I'm waiting for you to start doing this work
- But I can't on Tuesday I only have time today.
- I'm sorry, but I'm only available Tuesday to teach you and lend you my stuff. Other days are busy with other customers.
- Okay! That means I'm going to have to sacrifice my Tuesday, give up my tasks.
- I forgot. To do your job yourself, you also have to pay for the nonproductive factors.
- That is? What is this?"
- Bureaucratic, tax, vat, security, insurance, fuel etc.
- Oh no!... But to accomplish these tasks, I'm going to spend more money and waste a lot of time!
- Do you have them? You can do it to me before?"
- Okay!
- I'll make you all the material you need. Truck loading is done Monday evening or Tuesday morning you'll have to come by 6 loading the truck. Don't forget to be on time to avoid traffic jams and be on time
- At 6??? Nope! Too early for me! I used to getting up later.
...
- You know, I've been thinking. Y ' all better get the job done. I'd rather pay you the $1500. If I had to, it wouldn't be perfect and it would cost me a lot more.

When you pay for a job, especially handcrafted, you pay not only for the material used, but also:
- Knowledge
- Experience
- Study
- Tools
- Services
- Time to go
- punctuality
- Accountability
- Professionalism
- Accuracy
- Guaranteed
- Patents
- Sacrifices
- Safety and security
- Payment of tax obligations

No one can denigrate other people's work by judging prices. My prices to do this would be much higher than it says here for that job but its the point not the amount.
Only by knowing all the elements necessary for the production of a certain work can you estimate the actual cost.

I am sharing it to support craftsmen and entrepreneurs.

07/06/2021

Business hours update (temporary ):
Our records indicate, month of July and August are the slowest time of the year ( for us) . We will be closed on every Saturday until the end of August. Thank you for your support as always.

Happy Fourth to everyone who is celebrating today! Let us promise to be the bearers of kindness and love, and unite with...
07/03/2021

Happy Fourth to everyone who is celebrating today! Let us promise to be the bearers of kindness and love, and unite with the true spirit of the nation!

Happy Fourth to everyone who is celebrating today! Let us promise to be the bearers of kindness and love, and unite with the true spirit of the nation!

Another gem has been discovered,  WTF moment. Can anyone guess what this is and about how many times it has been reused?
06/30/2021

Another gem has been discovered, WTF moment. Can anyone guess what this is and about how many times it has been reused?

Another, WTF moment, I wanted to post these every Saturday but couldn't wait. What is wrong with this picture ;)
06/29/2021

Another, WTF moment, I wanted to post these every Saturday but couldn't wait. What is wrong with this picture ;)

Another, WTF moment, I wanted to post these every Saturday but couldn't wait. What is wrong with this picture ;)

Today's WTF moment. 2002 ZX9R. At least the color is a pretty good match !
06/26/2021

Today's WTF moment. 2002 ZX9R. At least the color is a pretty good match !

Today's WTF moment. 2002 ZX9R. At least the color is a pretty good match !

#dpbrakes, our #1 choice of pads
06/22/2021

#dpbrakes, our #1 choice of pads

#dpbrakes, our #1 choice of pads

06/03/2021
Such a beauty 😍
06/02/2021

Such a beauty 😍

Such a beauty 😍

Such a mess !
06/02/2021

Such a mess !

06/02/2021

BellissiMoto goodies being installed today, it is going to be a long day.

BellissiMoto
06/02/2021

BellissiMoto

BellissiMoto

What is wrong with this picture ? Hint: Vacuum port and the vacuum line is pictured, just removed from a Honda Valkrie
06/01/2021

What is wrong with this picture ?

Hint: Vacuum port and the vacuum line is pictured, just removed from a Honda Valkrie

What is wrong with this picture ?

Hint: Vacuum port and the vacuum line is pictured, just removed from a Honda Valkrie

05/22/2021

As of May 1st 2021 , we are no longer processing tire warranties.

Great bike to work on ! And a few things need to be corrected ;)
02/18/2021

Great bike to work on ! And a few things need to be corrected ;)

12/23/2020

Merry Christmas and Happy New Years to all …

Our holiday business hours:
12/24 : closing early.
12/25 : closed
12/26 : closed
12/31 : closing early
01/01 : closed

Sophia loves listening Christmas radio #catlife
12/16/2020

Sophia loves listening Christmas radio #catlife

Simple clutch/brake system flush goes a long way....
12/01/2020

Simple clutch/brake system flush goes a long way....

Our day is never boring, we get to work on little bit of everything;)
11/18/2020

Our day is never boring, we get to work on little bit of everything;)

This is not a joke or a prank :) simple inner tube change revealed a piece of wood that was left in the tire previously,...
11/12/2020

This is not a joke or a prank :) simple inner tube change revealed a piece of wood that was left in the tire previously, everytime we say you can't make this s**t up something new happens...
#itisneverboring

11/11/2020

"We remember those who were called upon to give all a person can give, and we remember those who were prepared to make that sacrifice if it were demanded of them in the line of duty, though it never was. Most of all, we remember the devotion and gallantry with which all of them ennobled their nation as they became champions of a noble cause." -- Ronald Reagan

Address

6923 Narcoossee Rd, Ste 617
Orlando, FL
32822

General information

Please visit our web site, www.thecyclepro.com and www.rapidbike.us Our shop flat labor rate is $90.00 per billed hour. We never rush to beat flat rate hour. We love what we do... USA Distributor of Dimsport RapidBike Products visit www.rapidbike.us for all product info e-mail us [email protected] USA Distributor of Arrow Exhaust Italy. ( 1 of 2 )

Opening Hours

Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

(407) 277-5557

Products

Motorcycle parts and accessories

Alerts

Be the first to know and let us send you an email when Cycle Pro posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cycle Pro:

Videos

Our Story

Since 2008 Cycle Pro has been operating in the same location. We are a motorcycle repair shop. We fix, service and provide parts and accessories for many variety of motorcycles and sometimes ATVs with the exception of, we don’t work on anything made in China and anything older than 2000 model year.

U.S.A. distributor of Dimsport Rapid Bike Products and distributor of Arrow Exhaust Systems Italy.

Our goal is to provide exceptional, high-quality and honest service, it is a very simple yet complicated task but we are good at what we do, while we are certainly not for everyone nor we want to be, however when you walk into our place , one thing we can guarantee is honesty and quality work with fair pricing ! We work on Japanese, American and European makes and models. Our services include all basic and advance maintenance, suspension work/tuning, engine rebuilding, tire service, crash repairs, and high performance upgrades.

We are growing and will continue to grow while maintaining our core values. As of 2019 we have almost 4000 customers in our database and everyday more gets to be added. We love you and certainly appreciate your business Central Florida !

Nearby autos & automotive services


Other Motorcycle Repair in Orlando

Show All

Comments

expanding the "STAND YOUR GROUND LAW" in Fl.!
Exceptional work done on this speed master by cycle pro . Thank you for always going that extra mile .
2016 Africa Twin, Rapid Bike EVO Exclusive finished install today and tested. Awesome improvement. Yaman was a huge help with the install. Thank You, Guys! The best customer service I have every had!!!
Upgrade time!!!
Upgrades from Dr. Doc!!!
Do you service Ducati?