Automotive Diagnostic Software

Automotive Diagnostic Software Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Automotive Diagnostic Software, Automotive repair centre, 276 Reock Street, NJ, Orange City, FL.

πŸ”§ HOW TO FIX DTC U0302 - Software Incompatibility With Transmission Control Module on VW Jetta 2015πŸ“Œ DTC U0302: Software...
02/26/2025

πŸ”§ HOW TO FIX DTC U0302 - Software Incompatibility With Transmission Control Module on VW Jetta 2015
πŸ“Œ DTC U0302: Software Incompatibility With Transmission Control Module
⚠ Cause: After replacing the engine control module (ECU) with incompatible software, an update and recoding are required.
🚨 Symptoms: Check engine light is on.
Step-by-step solution:
- Step 1: Read DTC memory.
- Step 2: Use the flash function to update the software with the correct part number for the transmission.
- Step 3: Perform coding after flashing.
- Step 4: Read and clear all system fault codes.
- Step 5: Recheck DTC memory.
- Step 6: Verify the issue on the vehicle.

How to identify DTC codeπŸš˜πŸ’»
02/25/2025

How to identify DTC codeπŸš˜πŸ’»

Without a diagnostic tool, even the most skilled technician is working blind in a modern repair shop.
02/20/2025

Without a diagnostic tool, even the most skilled technician is working blind in a modern repair shop.

This is the customer's fault πŸš–πŸš–. He told me to leave it in another garage for weeks and still can't find its fault 😧😧. U...
04/26/2022

This is the customer's fault πŸš–πŸš–. He told me to leave it in another garage for weeks and still can't find its fault 😧😧. Unbelievable, this car my technician solved in just 1 hour. hour.
-Connect the vehicle to the diagnostic device.
- Connect to a computer to install specialized error reading software
-Determine the fault on the car through the computer screen
- Repair and replace
-Check again for the last time
- Handing over the car to the customer.
Simple and useful, right? How about you, your work is going well.

This guide teaches you how to use the DTS Monaco to code your Benz key if you leave the vehicle.Connect the interface to...
04/25/2022

This guide teaches you how to use the DTS Monaco to code your Benz key if you leave the vehicle.
Connect the interface to the car obd port, then run the Monaco software
ECU: KI221
Select β€œSchlusselwarnung” and set the value to β€œactive”

Different MB STAR C3 C4 C5 C6 Diagnostic Devices Comparison, did you know? MB Star Diagnostic Tool main for Mercedes Ben...
04/20/2022

Different MB STAR C3 C4 C5 C6 Diagnostic Devices Comparison, did you know?
MB Star Diagnostic Tool main for Mercedes Benz Diagnostic & Programming
βœ… Mb Star C3: For Old Mercedes Benz Vehicles till 2015
βœ… MB Star C4: For Old and New Mercedes Benz Vehicles till 2020
βœ… MB Star C4 with DoIP: For Old and New Mercedes Benz Vehicles till 2020, support DoIP protocols for new vehicles
βœ… MB Star C5: For Old and New Benz Vehicles till 2020, same as SD C4
βœ… OEM C6: For Old and New Mercedes Benz Vehicles, don’t support Vediamo
βœ… C6 VCI (A410-3): For New Mercedes Benz Vehicles, don’t support DAS, can only work with the factory software
βœ… Benz eCOM: For New Mercedes Benz Vehicles, don’t support DAS (Old Benz), can only work with the factory software

ARE YOU HAVING Trouble Coding and Program MERCEDES BENZ .When coding and programming Mercedes-Benz , one mistake can cau...
04/18/2022

ARE YOU HAVING Trouble Coding and Program MERCEDES BENZ .
When coding and programming Mercedes-Benz , one mistake can cause you to destroy an entire car model .
==>>> To avoid errors in the working process, you need:
πŸ‘‰ Xentry specialized diagnostic software latest version.
πŸ‘‰ Vediamo/DTS software: SCn offline, Coding and programming.
πŸ‘‰ Look up spare parts and circuit diagrams: WIS and EPC
πŸ‘‰ Repair and refresh ECU: Fdok, Seedkey, Xentry
πŸ‘‰ Full Pack Latest C4 Doip diagnostic equipment exclusively for Mercedes with the most stable operation.
-----------------------
All software and diagnostic equipment are available to Mercedes Benz technicians.
- With a technical team of many years of experience ready to support you 24/7, Solve all your questions and problems.
- In addition, we also provide you with free documents and videos that can help you use the software effectively and correctly.
=> You can contact me directly via whatsapp, I will send you the best information and documents for your work.

When programming with ISTA/P you code need to be compliant. the following notes:- Always follow the instructions and req...
04/16/2022

When programming with ISTA/P you code need to be compliant. the following notes:
- Always follow the instructions and requests given in ISTA/P.
- Leave your vehicle’s ignition switched on.
- Do not cut or interrupt the connection between your vehicle, the - - workshop network, and the vehicle interface.
- After any action is initiated in the luggage compartment, always close the boot lid to prevent overheating the luggage compartment lighting.
- You should not perform any other activity in your vehicle while programming aside from what is instructed by ISTA/P.

Features and Diagnostic Systems of Star ICOM NEXT- The BMW ICOM NEXT Wi-Fi diagnostic system is equipped with in-depth d...
04/15/2022

Features and Diagnostic Systems of Star ICOM NEXT
- The BMW ICOM NEXT Wi-Fi diagnostic system is equipped with in-depth diagnostic functions of a specialized fault reading device such as information system management, engine system support, power system, brake system, steering system, etc.+ Exceptional diagnostic and investigative features on BMW specialized diagnostic equipment:
- Diagnose all BMW models: support from old to new models.
In-depth faults reading and clearing: intuitively read errors and display errors systematically.
- Read data from all vehicle systems: view live data in real-time with precision.
- Electronic control mechanism activation function: activates all control systems on the vehicle, quickly locating faults.
- Review maintenance, repair information: describe the system in question, maintenance information.
- Image repair and removal instructions: easy repair of damage with sensor location-specific repair process instructions, electrical jack, and overview circuit diagrams.

Features of SD Connect C4 DOIP REP 1:1 . connectorLet's take a look at this product to see why MB SD Connect C4 DOIP is ...
04/14/2022

Features of SD Connect C4 DOIP REP 1:1 . connector
Let's take a look at this product to see why MB SD Connect C4 DOIP is the most used at the moment:
- Support Mercedes Benz 12V and 24V trucks. New Mercedes Benz support for Doip Protocol.
- With free engineering software, DTS Monaco V8.16, DTS 9 and Vediamo V5.01.01.
- Language support: English, Croatian, Czech, Danish, Dutch, Perfection, French, German, Greek, Hungarian, Italian, Japanese, Korean, Romanian, Russian, Polish, Portuguese, Spanish Japan, Sweden, Turkey, China.
- Wifi connection support
- C4 DOIP has good quality, waterproof, impact resistant.
- You do not need a battery to update the firmware.
- The C4 DOIP is compatible with all Mercedes software.

Replacing the door is absolutely safe, if you have a need, please contact us πŸ˜‚πŸ˜‚ πŸ˜‚πŸ˜‚ πŸ˜‚πŸ˜‚
04/13/2022

Replacing the door is absolutely safe, if you have a need, please contact us πŸ˜‚πŸ˜‚ πŸ˜‚πŸ˜‚ πŸ˜‚πŸ˜‚

Address

276 Reock Street, NJ
Orange City, FL
07050

Alerts

Be the first to know and let us send you an email when Automotive Diagnostic Software posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Automotive Diagnostic Software:

Featured

Share