Ward's Services

08/29/2024

Send a message to learn more

10/11/2021

There are many features to a new battery but the weight is one of the most important. Here is why! Check it out!

09/24/2021

Indexing spark plugs can be a source of debate among enthusiasts. We walk you through the process and let you decide for yourself.

09/17/2021

These 10 tech tips from Jeff Smith's 40-plus-year career in the automotive aftermarket can help you flatten the learning curve.

08/16/2021

According to experts, incorrectly torquing rod bolts is an invitation for galled or stripped threads. We went to ARP for the proper procedure.

08/05/2021

We research the differences between Performance Distributor’s line of ignition products and the OE-type HEI ignition components.

07/27/2021

Revised 2021 Race Schedule ... We will have R-750's for the Late Model Sportsman and Street Stocks by the end of the week. You may run either the Hoosier 890's or the Hoosier R-750 for the remainder of 2021

http://www.montgomerymotorspeedway.org/schedule/2021-race-schedule/

07/27/2021

The small-block Chevrolet might be known as a leaky engine, but with some care and patience, you can get it to seal up tight.

07/27/2021

Concerns about the availability of tires remain prevalent with several prestigious races like the Throwback 276 set to take place in the coming weeks.

07/26/2021

The challenges for the short track industry amidst a national Hoosier tire shortage doesn’t end once a new shipment arrives barely in time for a marquee event. In the case of this weekend at Five Flags Speedway in Pensacola, it was only the beginning. Several Super Late Model teams experienced som...

07/24/2021

Modern pistons have come a long way, with modern technology blurring the lines between the traditional divisions between piston alloys.

07/22/2021

Are you looking to buy new pistons? Here are five tips that can help ensure you make the right choice for your application.

06/21/2021

Often overlooked on a racecar are those wheel studs that are subject to incredible shear loads. ARP and Mark Williams Enterprises lend their many years of expertise on this all-important subject.

06/10/2021

As many of you have heard there is a problem getting some race tires from Hoosier tire company at the present time. they are producing as fast as they can but we find ourselves in a dilemma heading into the next couple of races.

06/10/2021

When it comes to roller lifters, there are two options: needle bearings or solid bushings. Both have pros and cons, so we look at them here.

06/03/2021

We found a better option for engine coolant than using water and antifreeze. Find out more about why it's better and how it works.

06/01/2021

Vortec Cylinder Head Spark Plug Dilemma
Vortec iron cylinder heads still have a place in the performance world of the small-block Chevy. These heads are inexpensive yet flow very well. But, they do have some idiosyncrasies that need to be identified. A major point that is rarely addressed is that the Vortec iron head uses a different spark plug than a typical iron small-block Chevy. The Vortec uses a spark plug with a tapered seat with a 0.680-inch thread length. A standard small-block Chevy plug thread length is 0.450.

05/28/2021

Relays are a necessity when you're trying to wire a vehicle the right way.Jeremy Stoemer from Holley breaks down how to use relays and how they work.

05/10/2021

Running a big camshaft on the street can pose some serious drivability issues with a carburetor. Here, Jeff Smith walks you through how to alleviate that.

05/07/2021

05/02/2021

When spec'ing oiling system components, what applies to the traditional small-block doesn't necessarily apply to the LS engine family. Moroso guides us along.

05/01/2021

Dave Mader III is one of the oldest racers in the sport. He finished second in ARCA racing at Talladega last week, and at age 65, he has no plans of slowing down anytime soon.

04/30/2021

04/27/2021

Tickets are out for the SRX Racing series! Come see me and have some fun! It is going to be an awesome time!

GET EM WHILE THEY’RE HOT! Tickets are available:

Stafford (6/12) - Sold Out!

Knoxville (6/19) - https://bit.ly/3gD4sUo

Eldora (6/26) - Coming Soon!

Lucas Oil (7/3) - https://bit.ly/3sVrCrm

Slinger (7/10) - https://bit.ly/3gHjR5W

Nashville (7/17) - https://bit.ly/3gFP5dL

04/22/2021

How much compression can you safely run when burning pump gas? Jeff Smith talks about what's safe and a few concerns you should have.

04/22/2021

JE Pistons shows us how to achieve proper piston-to-wall clearance measurements related to their coated piston technology.

04/08/2021

Selecting the right set of cylinder heads goes beyond just bolting on a pair that fits. We cover 10 tips you need to know when buying heads.

04/03/2021

The starter bolted on the bottom of your engine performs an amazing feat time and again. So, It’s a brutal proposition which is why it’s so important to select the proper starter for your application – here's how.

03/25/2021

Often you hear people talking about Magnafluxing a component. Here, we take a look at what is actually involved in the process.