Midwest Speed & Fabrication

08/19/2026

We got Rob's 55' all finished up for him to be at the Tri-5 Nationals. In our previous posts, you saw the printer running parts for his custom center console lower dash extension. Well, here is the final product! Thank you to our friend Ryan at Kutting Edge Interiors for the leather work! It

08/05/2026

More customer center consoles coming to life on the printer! This one is for Jeff’s Drag n’ Drive vehicle.

07/09/2026

More parts on the printer for Rob’s 55 Wagon!

People often ask us, “How long does that stuff take to print?”

The answer is longer than you think. By the time we are all said and done, we will have about 168 hours to print and complete all the parts that go in to making this whole center console. That may seem like a lot but that’s not 168 labor hours. That’s machine hours. Printers are pretty much a set and forget type of thing once you get them dialed in and working properly.

06/24/2026

The CAD work is complete and we are printing! This is just one of a handful of parts for the console we are building in Rob's 1955 Handyman Wagon. Keep an eye out as we show you more in the near future.

12/13/2025

Check out the latest! Here we show you how we made Jeff’s air box in his 1969 Camaro.

In this video we give the rundown on how we thought up, designed and fabricated this one-ff air box for our customer's 1969 Camaro.

10/02/2025

This customer brought us his absolutely mint 1961 Impala for the MSF custom fabrication treatment!

09/02/2025

We hope everyone had a great holiday weekend! Now it’s back on the grind and bringing new solutions to the aftermarket automotive world.

This new spacer was designed and produced using 3D scanning + 3D printing. The original spacer was made of wood, which eventually split and cracked under heat and stress. By switching to PPA-CF, we not only improved durability but also gained heat resistance up to 450°F, ensuring reliability in demanding environments.

We also incorporated O-ring grooves, providing a clean, silicone-free seal. The result is a stronger, longer-lasting, and more precise solution.

If you’re looking for scanning and 3D CAD solutions for your vehicle, get in touch with us—we’d love to help bring your project to life.

07/24/2025

🏁 SECOND ANNUAL MEMORIAL HOT ROD GET TOGETHER 🏁
Join us as we honor the memory of James Jones with a celebration of classic muscle cars, hot rods, and community spirit!
📅 October 4th, 10am-4pm
📍 Main Street Bar & Grill - 145 Main St, Old Monroe, MO
🍳 Want to make a full day of it? Breakfast starts at 8am for early birds!
🎸 Live rock music by THUNDERHEART from 12-4pm
Bring your rides, bring your stories, and let's celebrate James the way he would have wanted - surrounded by horsepower, good friends, and great music. All classic muscle cars and hot rods welcome!
See you there! 🚗💨

07/23/2025

WEEKLY SPOTLIGHT: Rob's 1955 Chevy Build

Rob brought his beautiful '55 Chevy in a while back for some serious upgrades, and man did we have fun with this one!
Here's what we did:

-Pulled out the old BBC and dropped in an LS-based 408 stroker
-Holley Performance Terminator X EFI system for fuel management
-Tremec TKX 5-Speed transmission from Silver Sport Transmissions
-Ford 9" differential from Quick Performance to handle all that power
-ReduxRacing ITB intake to dress up the engine
-Wilwood Disc Brakes Disk Brake Kit
-Hard-lined everything on the intake for a clean finish with fittings and line brought to you by our friends over at Fragola Performance Systems

This thing is an absolute monster now. Rob's going to have a blast driving it!

Thanks for trusting us with your ride, Rob. Always love working on these classic builds.

Got a project in mind? Give us a shout!

06/26/2025

It’s 2025, if you aren’t utilizing 3d printing technology into your builds, what are you even doing? Gone are the days of saw dust and liquid nails as we roll in a new carcinogen……..carbon fiber embeded microplastics.😂