JP3 Motorsports

JP3 Motorsports We are grassroots motorsports enthusiasts ... we own and drive the cars we make parts for ...

06/07/2026

Thinking about our AC line kits? We’ve held prices for over three years now but prices increases are needed … get in now before the end of the month.
Follow: 
https://linktr.ee/jp3motorsports

Getting close to dropping our dual oil cooler kit … fully ducted, crimped Motorsport grade lines, remote mounted thermos...
06/04/2026

Getting close to dropping our dual oil cooler kit … fully ducted, crimped Motorsport grade lines, remote mounted thermostat, mounting brackets … OEM+ fit and finish … stay tuned!
Follow: 
https://linktr.ee/jp3motorsports

Let’s talk oil temps … how is your FD RX7 oil cooling?  Does your system keep oil temp at the thermostat rated temp or a...
06/03/2026

Let’s talk oil temps … how is your FD RX7 oil cooling? Does your system keep oil temp at the thermostat rated temp or are your oil temps below? We’ve been doing some testing and data logging and have seen not all oil thermostats are built equally. Some allow too much bypass flow, which in turn, depending on your oil cooler efficiency, results in oil that does not get warm enough to burn off water/condensate. Will be sharing data soon!
Follow: 
https://linktr.ee/jp3motorsports

05/29/2026

Need your FD wipers functional again? We can help.

Oil pressure regulator kits for the FD RX7 are now up on the website.  Available for a few standardized layouts as full ...
05/13/2026

Oil pressure regulator kits for the FD RX7 are now up on the website. Available for a few standardized layouts as full kits and also available without the OPR or just the mounts only.
Follow: 
https://linktr.ee/jp3motorsports

05/08/2026

First startup on the shop CYM FD. Converted over from an Apexi Power FC to a S6 FD Plug and Play ECU. Why - a more modern ECU with protections in place. Power FC’s have been a go to ECU for a while now, but most are over 20 years old. The Link plug and play ECU allows you to use the factory engine harness and is a perfect upgrade to modernize the engine control.
Follow:
https://linktr.ee/jp3motorsports

If you’re making your own FD RX7 fuel system and running your lines (8AN feed / 6AN return), you know how hard it can be...
05/07/2026

If you’re making your own FD RX7 fuel system and running your lines (8AN feed / 6AN return), you know how hard it can be to route/secure the connections to the feed and return lines close to the firewall. With this kit, you will be able run AN lines going to the rails and coming from the fuel pressure regulator and secure them closer to the firewall with clearance behind the OEM oil pedestal/filter location.

Follow: 
https://linktr.ee/jp3motorsports

Address

Old Bridge, NJ
08857

Alerts

Be the first to know and let us send you an email when JP3 Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share