Wades Hotrod Shop

02/17/2026

Just finished up a 5.3 for a mud truck, this one won’t be fogging mosquitoes for awhile.
If you need fresh power for your toys from side by sides to diesels, I do them.

02/05/2026

Here’s a couple before and after pictures of a set of 6.0 diesel heads surfaced and O-ringed. I do several sets of these a month and I can usually turn them around quickly.

01/26/2026

Here’s a little different post for today. I have used Crankshaft Service in OKC for a few years now Ken and Bryce nail it 100% perfect every time. This one had spun all eight rod bearings.

08/04/2025

Two hours in on a new week, and success with a broken bolt on a 6.7 Ford crankshaft.

07/04/2025

05/30/2025

So I’m in the process of building a TH475 for Nicole Shane Morris mud truck, and wait, what. Nope not a 475 anymore because someone else in a prior rebuild has stolen the straight cut gears and replaced them with 4L80e gears from a center l**e transmission.
So not only did you steal from your customer, you also caused a massive failure because the intermediate shaft from a 4L80 doesn’t have a l**e hole for the plantaries.
But remind me, why are mechanics called thieves?

05/30/2025

Anyone interested in a Gen3 hemi 6.1. Molner crank, Manley rods, Diamond pistons. CNC’d heads. Needs cam and lifters and final assembly. Intended to be used with a turbo. $10k buys it.

05/27/2025

Wiseco SBC piston set, part number in description. Do your research. $400

05/27/2025

Procharger water pump pulley, part number in the description. Probably fits a Chevy. $25

05/27/2025

Box of Autometer gauges, no I’m not separating. $150

05/27/2025

Procharger knock off carb hat. $50