Aeroforce Technology

05/08/2026

**NEW** AeroForce Interceptor OBD2 gauge and gauge pod for the Nissan Z!

11/11/2025

Our AeroForce Interceptor OBD2 gauge now supports the new WWH-OBD protocol. Manufacturers are starting to migrate over to this, such as Ford with its 2025 and newer Maverick pick-up truck.

11/10/2025

Our AeroForce Interceptor OBD2 gauge now supports the new WWH-OBD protocol. Manufacturers are starting to migrate over to this, such as Ford with its 2025 and newer Maverick pick-up truck.

07/31/2025

READ ETHANOL % FROM YOUR OBD2 PORT!!

AeroForce OBD2 Ethanol Content and Fuel Temperature Sensor Kit for CAN bus vehicles.

* Transmits the ethanol % and fuel temperature on the CAN bus network of your vehicle. Works with 2008 and newer vehicles and others made prior using a CAN bus.

*More accurate than analog 0-5V output kits, no grounding issues, no conversion issues

*Kit contains the GM/Continental ethanol sensor, 10' sensor to controller cable, controller, OBD2 pass thru cable, and power harness. Controller size is: 3"x 2"x 0.36".

*This kit injects the ethanol content and fuel temperature read from the sensor into the CAN bus data stream using the OBD2 pass thru cable.

*The kit's controller emulates an ECU using a CAN address that should work well on most CAN bus vehicles but can be changed by the user if there is a conflict.

*Can be used by aftermarket or piggyback tuning modules or ECMs, scantools, and OBD2 products such as our Interceptor scan gauge that can recognize this OBD2 parameter

Fuel Temperature range: -40 deg to 257 deg F
Ethanol sensor accuracy: 3% of reading

Tuner Info:

CAN bus ID 11 bit and 29 bit
CAN bus ECU # 0x7E6 (default) but can be changed by user
CAN bus PID 0x52
CAN bus update rate 10Hz
Data 0: Ethanol % = 8 bit
Data 1: Fuel Temp (C) 8 bit -40

03/24/2025

02/07/2025

Once you try our AeroForce Technology Audi B9 S4/S5 OBD2 gauge we think you’ll find it indispensable! These cars are extremely capable, especially when tuned, keeping an eye on things like knock, oil pressure, and fueling parameters is critical. Not only will it read generic parameters like AFR, Intake Air Temp, Coolant, etc., it also supports enhanced data such as Actual and Commanded Boost (from the factory MAP sensor), Transmission Temperature and Gear, Oil Pressure, Fuel Pump DC, individual cylinder Knock (Ignition Adjust), Torque, Misfires, and many more! With its graphic display, up to 8 parameters can be displayed at one time plus a live scrolling graph mode. Don’t limit yourself with competitor’s outdated segmented LED displays that are only capable of one parameter at a time, and only generic emissions parameters. The high intensity programmable warning lights cannot be missed when a critical item goes beyond a safe threshold. The Aeroforce gauge can also turn on the cooling fans when the engine is off to quickly cool down the intercooler and engine bay. A great feature to use while at the track waiting to run.

Our 52mm gauge pods are made using the Multi-Jet Fusion process, then shot-peened to harden and smooth the surface. The result is OEM quality fit and finish. Compare to the rough/poor finish of cheap FDM 3D printed knock-offs. Know what you are buying! Our pods not only enhance the interior of the vehicle but are designed to provide optimal sight lines to the gauge while driving without sacrificing the functionality of other interior components such as HVAC vents.

As always, these products have been track tested to work properly and stay put under the most extreme conditions!

02/06/2025

AeroForce has released it's new Corvette C8 phone mount with charger. Custom designed for the C8 for OEM quality fit and finish. Simple and sturdy installation, no drilling or modifications needed. Designed to allow all wiring to be hidden, so no unsightly and cluttering wiring run in front of the dash. Great sight lines for safer viewing of phone on the road. ,

02/01/2025

AeroForce has introduced new products for the Subaru VB WRX (2022-Present). First is our Alpha-Mag™ phone mount/charger, that can double as a Cobb Accessport™ mount. The base has a standard 16.5mm ball mount so other third party accessories can also use this. Next is our line of 52mm gauge pods, both dash and overhead mounts. Made using the Multi Jet Fusion process and shot peened post processing to harden and smooth the outer surface. These items have OEM level fit and finish unlike cheaper, low quality FDM 3D prints.

Both offer ideal sight lines for ease of use and safe driving conditions. All are designed to hide wiring to keep your interior looking great and free of unsightly cables running in front of your dash.

Finally our Interceptor OBD2 gauges make the perfect match for our pods, allowing you to view all of the important OBD2 parameters, read and clear DTS’s, measure performance, and warn of dangerous operating conditions.

11/27/2024

Calibrated Speed and Performance: looking awesome!

Aeroforce Technology scan gauges look killer in the C7z !