Iron Motorsports

Iron Motorsports Performance work (Engines, suspension, braking). Chassis dyno tuning.

What's that main cap from? Shut up if you know me that well. Lol
08/26/2023

What's that main cap from? Shut up if you know me that well. Lol

It's all coming together now...
02/14/2023

It's all coming together now...

02/07/2023

Cut a stubby shifter to top the Pro 5.0 tower in the Regal. Little extra effort required for reverse. Just gotta wait for the k**b.

Exhaust for the Regal all welded up w/ paint over all the ugly welds.
01/20/2023

Exhaust for the Regal all welded up w/ paint over all the ugly welds.

And now the passenger is safe.
09/08/2022

And now the passenger is safe.

Wish the rest looked this good (from a distance). I'm sure the paint will look terrible in the sun.
09/07/2022

Wish the rest looked this good (from a distance). I'm sure the paint will look terrible in the sun.

So do I take credit for the head porting, or chalk it up to the cam? Lets have your guesses on the black WS6 hp and tq. ...
07/31/2022

So do I take credit for the head porting, or chalk it up to the cam? Lets have your guesses on the black WS6 hp and tq. 408. 230ish .600+ lift cam. Old FAST 92mm intake, headers, and good 2.5" dual exhaust. 317 heads.

These are the tires I would turn away from the dyno.😁
07/30/2022

These are the tires I would turn away from the dyno.😁

Got the new lung hanging in the Datsun. Waiting on odds and ends, and hopefully everything weathered two years of inacti...
07/22/2022

Got the new lung hanging in the Datsun. Waiting on odds and ends, and hopefully everything weathered two years of inactivity. Anyone know of a good windshield for a 68-72 Datsun pickup? 510 windshield might even fit (those ingenious Japanners).

05/13/2022

Yay. Oil pressure is not low on black WS6. Just a bad gauge in dash.

And a driveshaft loop to finish off the underside stuff.
04/23/2022

And a driveshaft loop to finish off the underside stuff.

So after some real basic methods, I think I got the D100 to about an 1/8" total toe in. And the steering wheel is clocke...
04/20/2022

So after some real basic methods, I think I got the D100 to about an 1/8" total toe in. And the steering wheel is clocked too. Not worried about caster or camber cuz she was never gonna be a corner carver with that manual box.

Address

Dawson Road
North Pole, AK
99705

Telephone

(907) 978-4846

Website

Alerts

Be the first to know and let us send you an email when Iron Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category