Misfit Cycle Shop

Misfit Cycle Shop motorcycle repair and service, Parts, Paint and more

No rear brake light, 08 kawasaki vulcan 900, opps the brake light trigger switch has left the room, there its is, hidden...
05/07/2026

No rear brake light, 08 kawasaki vulcan 900, opps the brake light trigger switch has left the room, there its is, hidden wayyy back there

03/07/2026

That's why you don't want a gear drive in a twin cam, the pinion shafts are never in spec, 3 thousands out of round, most are 5 to even 12 thousands, gear drives like 3 to 4 thousands, that's going to cost a pretty penny https://www.facebook.com/share/r/1C5wn2dYH2/

02/11/2026

When the weather is warm things happen in the shop

02/09/2026

One more project done,my favorite customer Melissa Skinner bikes ready for another 68,000 miles

Cam plate set up with the new cams, cam chains and hydro tensioners, high output oil pump primed and ready to go, next i...
02/09/2026

Cam plate set up with the new cams, cam chains and hydro tensioners, high output oil pump primed and ready to go, next is prime the tappets and work my way up to the top end

New inner cam bearings installed, on to the oil pump and set up of the cam plate
02/09/2026

New inner cam bearings installed, on to the oil pump and set up of the cam plate

Time to put my favorite customers bike back together Melissa Skinner , 2 thousands pinion run out is way in spec, especi...
02/09/2026

Time to put my favorite customers bike back together Melissa Skinner , 2 thousands pinion run out is way in spec, especially after 68,000 miles

Cases came today, lets build a engine
02/05/2026

Cases came today, lets build a engine

2 more pieces needed and rebuild starts
01/29/2026

2 more pieces needed and rebuild starts

Getting more parts in for Melissa Skinner 's bike, new cam plate, oil pump, cam chains, tentioners, lifters, inner cam ...
01/23/2026

Getting more parts in for Melissa Skinner 's bike, new cam plate, oil pump, cam chains, tentioners, lifters, inner cam bearings, gaskets, still looking for the fueling 585 reaper cam and outter cam chain, going to make it a bit more nastier then the last build, but that is what makes them fun to ride, lol

Address

Norfork, AR
72653

Opening Hours

Wednesday 10am - 3:29pm
Thursday 10am - 3:29pm
Friday 9:30am - 5pm
Saturday 9:30am - 11am

Telephone

+15184912013

Website

Alerts

Be the first to know and let us send you an email when Misfit Cycle Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category